Vol 22, No 3 (2024)

June

DOI: http://dx.doi.org/10.30811/jpl.v22i3

Micro Hydro Power Plant (MHP) performance using breast-shot waterwheel with different electrical load to improve efficiency

DOI: 10.30811/jpl.v22i3.4608 |

Abstract views : 194 times |

Check in Scholar

Yusuf Dewantoro Herlambang, Bono Bono, Gatot Suwoto, Baktiyar Mei Hermawan, F. Gatot Sumarno, Margana Margana, Marliyati Marliyati

PDF

278-283

Effects of modified intake surface to gasoline engine performance with the use of LPG

DOI: 10.30811/jpl.v22i3.4008 |

Abstract views : 137 times |

Check in Scholar

Nasrul Ilminnafik, Agus Triono, Reynaldi Akbar Ali, Rizal Mahmud, Dani Hari Tunggal Prasetiyo

PDF

284-287

The effect of temperature, pressure, and grind size on Total Dissolved Solids (TDS) and extraction yield of semi-automatic espresso machines

DOI: 10.30811/jpl.v22i3.4636 |

Abstract views : 162 times |

Check in Scholar

Rochmad Winarso, Slamet Khoeron, Rianto Wibowo, Darmanto Darmanto

PDF

288-294

Implementation of Failure Mode and Effect Analysis (FMEA) for centrifugal pump maintenance in water supply distribution system

DOI: 10.30811/jpl.v22i3.4739 |

Abstract views : 157 times |

Check in Scholar

Zakki Fuadi Emzain, Zean Galang Wardhana, Satworo Adiwidodo, Siti Duratun Nasiqiati Rosady, Prasetyo Prasetyo, Muhammad Andi Nova

PDF

295-298

Performance materials with variations of tractor drive wheel fin angle and low-cost manufacturing analysis

DOI: 10.30811/jpl.v22i3.4649 |

Abstract views : 124 times |

Check in Scholar

Sherly octavia saraswati, Endra Dwi Purnomo, Amiruddin Aziz, Cuk Supriyadi Ali Nandar, Setyo Margo Utomo, Marsalyna Marsalyna, Fandy Septian Nugroho, Lia Amelia, Achmad Ridho Mubarak, Lambert Hotma

PDF

299-304

Analysis of nitrogen adsorption capability at various activation temperatures of Klaten natural zeolite

DOI: 10.30811/jpl.v22i3.4882 |

Abstract views : 105 times |

Check in Scholar

Novi Caroko, Sukamta Sukamta

PDF

305-309

Effect of tubular-typed charcoal height variations on efficiency in passive interfacial solar desalination

DOI: 10.30811/jpl.v22i3.4890 |

Abstract views : 105 times |

Check in Scholar

Tri Ramadhani Pardiono, Muhamad Jafri, Ben Vasco Tarigan

PDF

310-314

Optimization of tool wear and surface roughness in ST-37 steel turning process with varying tool angles and machining parameters

DOI: 10.30811/jpl.v22i3.4983 |

Abstract views : 73 times |

Check in Scholar

Yanuar Burhanuddin, Suryadiwansa Harun, Gusri Akhyar Ibrahim, Arinal Hamni

PDF

315-318

A study on optimal parameter combinations for austempered ductile iron

DOI: 10.30811/jpl.v22i3.5001 |

Abstract views : 90 times |

Check in Scholar

Herry Oktadinata, Dewin Purnama, Rizal Nurdian Hamzah, Agung Slamet Apriyan

PDF

319-323

Investigating the effects of partitioning temperature fluctuations on the mechanical properties of ASTM A36 carbon steel using Q-P-T heat treatment: an experimental study

DOI: 10.30811/jpl.v22i3.5007 |

Abstract views : 2253 times |

Check in Scholar

Alief Muhammad, Mochamad Fani Nur Umri, Muhammad Fathuddin Noor, Dani Hari Tunggal Prasetyo, Indah Noor Dwi Kusuma Dewi, Angga Prasmana, Mas Ahmad Baihaqi, Hartawan Abdillah

PDF

324-333

Design and manufacturing of Welded Vacuum Testing (WVT) tool

DOI: 10.30811/jpl.v22i3.5024 |

Abstract views : 73 times |

Check in Scholar

Ariyanto Ariyanto, Muhammad Aqdar Fitrah, Salma salu, Muh Nurul Haq Amaluddin, Arman Latif, Rahmat Alwi, Halim Halim

PDF

334-337

Effect of rotation on achieving constant voltage in three-phase self-excited induction generator for small scale wind turbines application

DOI: 10.30811/jpl.v22i3.5279 |

Abstract views : 117 times |