Jurnal Polimesin

The Jurnal Polimesin is a peer-reviewed journal that publishes original, high-quality research papers on all branches of mechanical engineering. The editorial team's goal is to publish highly applied research and breakthroughs that can be disseminated while also recognizing the potential of mechanical engineering. This journal is published every two months: in February, April, June, August, October, and December.

Several Department of Mechanical Engineering members created and led the editorial team for this publication, which Lhokseumawe State Polytechnic produced in partnership with the Indonesian Lecturer Brotherhood.

This journal has been accredited by the National Journal Accreditation Institute (ARJUNA), which is controlled by the Republic's Ministry of Research, Technology, and Higher Education

PREFIX DOI:
http://dx.doi.org/10.30811/jpl

CONTACT US:
Registration, submission, and LOA
WhatApps: +6289529125780
e-mail: polimesin@gmail.com

Fast tracking
WhatApps: +6285176750427
e-mail: ajanpolimesin@gmail.com

General Inquiring
e-mail: polimesin@gmail.com

Jurnal POLIMESIN is an peer-reviewed journal that publishes original and high-quality research papers in all areas of mechanical engineering. The editorial team aims to publish high quality and highly applied research and innovation that has the potential

Announcements


Accreditation: SINTA-2
Recently, Polimesin is accredited as the SINTA-2. From now, It is on the board of a prestigious journals in the Indonesian government indexing body, called SINTA (Science and Technology Index). Briefly, SINTA is a program under the education and culture ministry to encourage scientific publication in Indonesia, especially in a Journal.
Posted: 2022-01-01	More...

More Announcements...

Vol 22, No 5 (2024): October

Multiresponse optimization of hole number and surface roughness in drilling processes for 316l stainless steel material using Taguchi-grey relational analysis method

DOI: 10.30811/jpl.v22i5.4470 |

Abstract views : 204 times |

Check in Scholar

Atik Pramono, Yanuar Burhanuddin, Gusri Akhyar Ibrahim, Suryadiwansa Harun

PDF

468-473

The effect of the number of syn-gas purification nozzles of the water scrubber method on the characteristics of gasification combustion results

DOI: 10.30811/jpl.v22i5.5298 |

Abstract views : 250 times |

Check in Scholar

Fuad Dwi Hanggara, Fisal Yuliansyah, Dwi Irawan

PDF

474-478

Quality improvement using lean six sigma in air conditioning products

DOI: 10.30811/jpl.v22i5.5408 |

Abstract views : 207 times |

Check in Scholar

Cipto Purwanto, Brian Sila Jayanti, Fransiska Sekarlati Bernard, Ardhianiswari Diah Ekawati

PDF

479-488

Design of an aluminum can pressing machine using a lead screw mechanism with a microcontroller-based monitoring system

DOI: 10.30811/jpl.v22i5.5219 |

Abstract views : 149 times |

Check in Scholar

Rizal Indrawan, Abdulloh Sami Alfaris, Agus Khumaidi, Dhika Aditya Purnomo, Fipka Bisono

PDF

489-494

The amount of coir composition effect on the flexural and tensile strength of coir composites

DOI: 10.30811/jpl.v22i5.5307 |

Abstract views : 157 times |

Check in Scholar

Muhammad Arsyad, Yan Kondo, Ridwan Ridwan

PDF

495-497

Optimizing prediction of stainless steel mechanical properties with random forest: a comparison of feature selection methods

DOI: 10.30811/jpl.v22i5.5381 |

Abstract views : 223 times |

Check in Scholar

Maimuzar Maimuzar, Hendra Hendra, Syarif Khan, Desmarita Leni, Islahuddin Islahuddin

PDF

498-507

Control and monitor bottle filling, capping and labelling machine using a programmable logic controller and human machine interface

DOI: 10.30811/jpl.v22i5.5210 |

Abstract views : 197 times |

Check in Scholar

Sri Kusumastuti, Aprilia Dian Pramesti, Rico Sigit Hartanto, Vinda Setya Kartika, Raditya Artha Rochmanto, Achmad Fahrul Aji, Aminuddin Rizal, Suryono Suryono

PDF

508-513

Enhancing textile quality control with the application of teachable machine and Raspberry Pi as machine learning-based image processing

DOI: 10.30811/jpl.v22i5.5308 |

Abstract views : 226 times |

Check in Scholar

Emmanuel Agung Nugroho, Joga Dharma Setiawan, M. Munadi, M. Diki

PDF

514-520

The impact of material selection and design on the environment in the process of making press tools for garment hanging products in sustainable manufacturing

DOI: 10.30811/jpl.v22i5.5457 |

Abstract views : 186 times |

Check in Scholar

Radhi Nurvian Amrullah, Syamsul Hadi, Muhammad Akhlis Rizza, Eko Yudiyanto, Safian Sharif, Mohd Azlan Suhaimi

PDF

521-525

Shear strength comparison of single lap and joggle lap adhesive joints in carbon fiber composites manufactured via vacuum-assisted resin infusion

DOI: 10.30811/jpl.v22i5.5437 |

Abstract views : 198 times |

Check in Scholar

Mikhael Gilang Pribadi Putra Pratama, Kosim Abdurohman, Rezky Agung Pratomo, Ryan Hidayat, Redha Akbar Ramadhan, Rian Suari Aritonang, Taufiq Satrio Nurtiasto, Riki Ardiansyah, Afid Nugroho, Awang Rahmadi Nuranto, Fajar Ari Wandono, Dudi Targani, Nur Mufidatul Ula

PDF

526-531

A quad-cliff mechanism for eco-printing by pounding technique: design, manufacturing, and testing

DOI: 10.30811/jpl.v22i5.5738 |

Abstract views : 248 times |

Check in Scholar

Farid Triawan, Arya Smara Dyota, Fatima Tasya Kamila, Kushendarsyah Saptaji, Nikolas Krisma Hadi Fernandez, Arridina Susan Silitonga, Abdi Hanra Sebayang

PDF

532-537

Twist and chord optimization using the linearization method on the taper blade of a micro-horizontal axis wind turbineTwist and chord optimization using the linearization method on the taper blade of a micro-horizontal axis wind turbine

DOI: 10.30811/jpl.v22i5.5540 |

Abstract views : 1192 times |

Check in Scholar

Muhammad Syaukani, Anugrah Wahyu Aryadi, Ilham Dwi Arirohman, Sarwo Edhy Sofyan, Aditiya Harjon Bahar, Sabar Sabar

PDF

538-548

Combined Carburizing and Shot Peening to Increase Gear Sprocket Surface Hardness

DOI: 10.30811/jpl.v22i5.5693 |

Abstract views : 191 times |