Hide
Show all
Study of characterization of natural biomaterials Nypa fruticans extract for scaffold fabrication using 3D bio-printing method
Abstract
Nypa fruticans (Arecaceae) is a tropical mangrove plant with potential as a natural biomaterial due to its galactomannan content, a water-soluble hetero-poly-saccharide suitable as a base material for bio-ink. This study aims to evaluate the potential of Nypa fruticans extract as a sustainable natural biomaterial for scaffold fabrication using 3D bio-printing technology. To optimize its mechanical and structural properties, glycerol and sorbitol were added as plasticizing agents. The research methods consist of (a) maceration method extraction of Nypa fruticans fruit, subsequent characterization by Fourier Transform Infrared (FTIR) spectroscopy and Gas Chromatography-Mass Spectrometry (GC–MS) analysis, (b) formulation of biomaterials with glycerol and sorbitol at varying concentrations (5%, 10%, and 15%), and (c) scaffold fabrication using 3D bio-printing. The scaffolds were then assessed for printed line width, density, and porosity. FTIR analysis confirmed the presence of hydroxyl (O–H) functional groups at 3600–3300 cmâ»Â¹, while GC–MS detected 5-hydroxymethylfurfural, indicating polysaccharide derivatives consistent with galactomannan content. The addition of sorbitol significantly influenced the physical properties and printability of the formulated bio-ink, with the optimal composition obtained at 85% Nypa fruticans extract and 15% sorbitol. This formulation successfully produced stable CAD-based scaffold architectures with cubic and rhombic pore configurations, achieving precise deposition widths (±1.18 mm) relative to the 0.5-mm nozzle diameter. An increased sorbitol concentration of 15% correlated with higher scaffold density (up to 0.971 g/cm3) and reduced porosity (down to 0.436). These findings demonstrate the potential of Nypa fruticans extract as an efficient and sustainable natural bio-ink for tissue engineering applications.
Study of characterization of natural biomaterials Nypa fruticans extract for scaffold fabrication using 3D bio-printing methodKeywords
Full Text:
PDFReferences
R. Geyer, J. R. Jambeck, and K. L. Law, “Production, use, and fate of all plastics ever made,†2017. [Online]. Available: https://www.science.org
F. Ozturk, M. Cobanoglu, and R. E. Ece, “Recent advancements in thermoplastic composite materials in aerospace industry,†Journal of Thermoplastic Composite Materials, vol. 37, no. 9, pp. 3084–3116, Sep. 2024, doi: 10.1177/08927057231222820.
Masdiana, Sri Gusty, Asmeti, and dkk, Revolusi Plastik dan Lingkungan, Pertama. Makassar: CV. Tohar Media, 2023.
C. Amni, Ismet, S. Aprilia, and Mariana, “Study on biodegradable plastic from sago with addition of glycerol and serbitor,†in IOP Conference Series: Earth and Environmental Science, Institute of Physics Publishing, Nov. 2019. doi: 10.1088/1755-1315/365/1/012052.
A. Rinanto, W. Sutopo, J. Mojo No, and K. Karangasem Kec Laweyan, “Peranan keilmuan teknik industri dalam perkembangan rapid prototyping,†2017. [Online]. Available: www.scopus.com
Md. A. Ali, C. Hu, E. A. Yttri, and R. Panat, “Recent advances in 3d printing of biomedical sensing devices,†Adv Funct Mater, vol. 32, no. 9, Feb. 2022, doi: 10.1002/adfm.202107671.
H. Tetsuka and S. R. Shin, “Materials and technical innovations in 3D printing in biomedical applications,†J Mater Chem B, vol. 8, no. 15, pp. 2930–2950, 2020, doi: 10.1039/D0TB00034E.
E. Davoodi et al., “Extrusion and microfluidicâ€based bioprinting to fabricate biomimetic tissues and organs,†Adv Mater Technol, vol. 5, no. 8, Aug. 2020, doi: 10.1002/admt.201901044.
Y. S. Zhang et al., “3D extrusion bioprinting,†Nature Reviews Methods Primers, vol. 1, no. 1, p. 75, Nov. 2021, doi: 10.1038/s43586-021-00073-8.
D. Cao and J. Ding, “Recent advances in regenerative biomaterials,†Regen Biomater, vol. 9, Apr. 2022, doi: 10.1093/rb/rbac098.
A. Festas, A. Ramos, and J. Davim, “Medical devices biomaterials – A review,†Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 234, no. 1, pp. 218–228, Jan. 2020, doi: 10.1177/1464420719882458.
Z. Othman, B. Cillero Pastor, S. van Rijt, and P. Habibovic, “Understanding interactions between biomaterials and biological systems using proteomics,†Biomaterials, vol. 167, pp. 191–204, Jun. 2018, doi: 10.1016/j.biomaterials.2018.03.020.
W. Dara and A. Majus Sikaraja, “Pemanfaatan mangrove (Sonneratia Caseolaris) dan Nypa (Nypa Fruticans) untuk minuman kesehatan,†2018. [Online]. Available: https://journal.pasca-unri.org/index.php/econews/index
C. N. Kendek, ; J S Tasirin, ; R P Kainde, and J. I. Kalangi, “Pemanfaatan hasil hutan bukan kayu oleh masyarakat sekitar hutan desa minanga iii kabupaten Minahasa Tenggara.â€
S. Purnavita and P. Wulandari, “Pengambilan galaktomanan dari buah nypa dengan metode ekstraksi,†Journal of Chemical Engineering, vol. 1, no. 2, 2020.
Mahfiroh and Venta Hasanah, “Ekstraksi galaktomanan dari buah nypa (Nypa fructicans W.) dengan menggunakan metode maserasi kinetik (Kajian rasio bahan : pelarut dan konsentrasi agen pengendap),†Universitas Brawijaya, Malang, 2017.
A. Maihemuti et al., “3D-printed fish gelatin scaffolds for cartilage tissue engineering,†Bioact Mater, vol. 26, pp. 77–87, Aug. 2023, doi: 10.1016/j.bioactmat.2023.02.007.
J. Rahaman, A. Reza, D. Nasare, J. Susanth, and D. Mukherjee, “Chitosan-based composite scaffolds for bone tissue engineering: Design strategies, mechanisms, and emerging roles in osteoimmunomodulation,†Mater Today Commun, vol. 49, p. 113948, Dec. 2025, doi: 10.1016/j.mtcomm.2025.113948.
L. C. Devi, H. S. D. Putra, N. B. W. Kencana, A. Olatunji, and A. Setiawati, “Turning portunus pelagicus shells into biocompatible scaffolds for bone regeneration,†Biomedicines, vol. 12, no. 8, p. 1796, Aug. 2024, doi: 10.3390/biomedicines12081796.
O. Komala, N. F. Utami, W. N. Tias, and U. Pakuan, “Fitofarmaka: Jurnal Ilmiah Farmasi Antioxidant Activity Test and Phytochemical Content of Ocimum sanctum Extract Based on Different Extraction Methods,†vol. 15, no. 1, pp. 46–52, 2025, doi: 10.33751/jf.v15i1.27.
M. H. Haido, A. H. Matti, and S. M. Taher, “Optimization of extraction conditions of bioactive compounds from kurdistan species Urtica dioica,†Cureus, May 2024, doi: 10.7759/cureus.61146.
A. Rusli, M. Metusalach, and M. M. Tahir, “Characterization of Carrageenan Edible films Plasticized with Glycerol,†J Pengolah Has Perikan Indones, vol. 20, no. 2, p. 219, Aug. 2017, doi: 10.17844/jphpi.v20i2.17499.
C. L. Pérez Gutiérrez et al., “The optimization of pressure-assisted microsyringe (PAM) 3D printing parameters for the development of sustainable starch-based patches,†Polymers (Basel), vol. 15, no. 18, p. 3792, Sep. 2023, doi: 10.3390/polym15183792.
K. Thavasiappan, M. Sivakumar Venkatesan, M. Ariffuddeen, O. Ponnuchamy, N. Ravichandran, and G. Murugesan, “Design, analysis, fabrication and testing of PC porous scaffolds using rapid prototyping in clinical applications,†2019. [Online]. Available: www.biomedicineonline.org
R. S. Abdelkader, G. A. Helal, Y. G. M. Galal, S. M. Soliman, R. R. Khalil, and N. Elsayed, “New trends in mycosynthesis of cellulose nanocrystals promoted by gamma irradiation of sugarcane bagasse,†International Journal of Environmental Science and Technology, vol. 22, no. 9, pp. 7867–7884, May 2025, doi: 10.1007/s13762-024-06144-z.
S. Purnavita, C. Oktaviananda, and N. D. Aurelia Purba, “Ekstraksi Galaktomanan dari Kolang-Kaling,†Prosiding Sains Nasional dan Teknologi, vol. 12, no. 1, p. 40, Nov. 2022, doi: 10.36499/psnst.v12i1.7365.
Z. Wang et al., “Effect of monosaccharide composition and proportion on the bioactivity of polysaccharides: A review,†Int J Biol Macromol, vol. 254, p. 127955, Jan. 2024, doi: 10.1016/j.ijbiomac.2023.127955.
B. Liu, L. Zhang, T. Zhu, Y. Liu, J. Chu, and N. Chen, “Structural characterization of polysaccharides of marine origin: A review,†Int J Biol Macromol, vol. 317, p. 144797, Jun. 2025, doi: 10.1016/j.ijbiomac.2025.144797.
W. Guo, Z. Zhang, J. Hacking, H. J. Heeres, and J. Yue, “Selective fructose dehydration to 5-hydroxymethylfurfural from a fructose-glucose mixture over a sulfuric acid catalyst in a biphasic system: Experimental study and kinetic modelling,†Chemical Engineering Journal, vol. 409, p. 128182, Apr. 2021, doi: 10.1016/j.cej.2020.128182.
P. Y. Nikolov and V. A. Yaylayan, “Thermal decomposition of 5-(Hydroxymethyl)-2-furaldehyde (HMF) and Its Further Transformations in the Presence of Glycine,†J Agric Food Chem, vol. 59, no. 18, pp. 10104–10113, Sep. 2011, doi: 10.1021/jf202470u.
S. D. Hardiningtyas, D. Winarsih, and B. Ibahim, “Efek penambahan sorbitol terhadap karakteristik film bioplastik berbasis kitosan dan agar,†Jurnal Pascapanen dan Bioteknologi Kelautan dan Perikanan, vol. 19, no. 1, p. 17, Jun. 2024, doi: 10.15578/jpbkp.v19i1.949.
M. Liu, Y. Zhou, Y. Zhang, C. Yu, and S. Cao, “Physicochemical, mechanical and thermal properties of chitosan films with and without sorbitol,†Int J Biol Macromol, vol. 70, pp. 340–346, Sep. 2014, doi: 10.1016/j.ijbiomac.2014.06.039.
L. Waalkes, J. Längerich, F. Holbe, and C. Emmelmann, “Feasibility study on piston-based feedstock fabrication with Ti-6Al-4V metal injection molding feedstock,†Addit Manuf, vol. 35, p. 101207, Oct. 2020, doi: 10.1016/j.addma.2020.101207.
J. A. Sirviö, M. Visanko, J. Ukkola, and H. Liimatainen, “Effect of plasticizers on the mechanical and thermomechanical properties of cellulose-based biocomposite films,†Ind Crops Prod, vol. 122, pp. 513–521, Oct. 2018, doi: 10.1016/j.indcrop.2018.06.039.
R. Ramdhani, V. Amalia, and D. A. Junitasari, “Prosiding seminar nasional kimia 2022 seminar nasional kimia 2022 UIN Sunan Gunung Djati Bandung,†Gunung Djati Conference Series, vol. 15, 2022.
G. D. Bazan-Panana, M. J. Torres-Calla, and M. V. Carranza-Oropeza, “Preparation of a biomedical scaffold from high-molecular-weight poly-DL-lactic acid synthesized via ring-opening polymerization,†Polymers (Basel), vol. 17, no. 12, p. 1708, Jun. 2025, doi: 10.3390/polym17121708.
I. Pedruzzi, E. A. Borges da Silva, and A. E. Rodrigues, “Production of lactobionic acid and sorbitol from lactose/fructose substrate using GFOR/GL enzymes from Zymomonas mobilis cells: A kinetic study,†Enzyme Microb Technol, vol. 49, no. 2, pp. 183–191, Jul. 2011, doi: 10.1016/j.enzmictec.2011.04.017.
S. Tripathi, S. S. Mandal, S. Bauri, and P. Maiti, “3D bioprinting and its innovative approach for biomedical applications,†MedComm (Beijing), vol. 4, no. 1, Feb. 2023, doi: 10.1002/mco2.194.
Z. Jiang, B. Diggle, M. L. Tan, J. Viktorova, C. W. Bennett, and L. A. Connal, “Extrusion 3D printing of polymeric materials with advanced properties,†Advanced Science, vol. 7, no. 17, Sep. 2020, doi: 10.1002/advs.202001379.
S. Grabska-Zielińska et al., “The characterization of scaffolds based on dialdehyde chitosan/hyaluronic acid,†Materials, vol. 14, no. 17, p. 4993, Sep. 2021, doi: 10.3390/ma14174993.
F. Mukasheva, L. Adilova, A. Dyussenbinov, B. Yernaimanova, M. Abilev, and D. Akilbekova, “Optimizing scaffold pore size for tissue engineering: insights across various tissue types,†Front Bioeng Biotechnol, vol. 12, Nov. 2024, doi: 10.3389/fbioe.2024.1444986.
M. S. Rahman et al., “Fabrication of biocompatible porous scaffolds based on hydroxyapatite/collagen/chitosan composite for restoration of defected maxillofacial mandible bone,†Prog Biomater, vol. 8, no. 3, pp. 137–154, Sep. 2019, doi: 10.1007/s40204-019-0113-x.
Rahmatullah et al., “Effects of chitosan on the characteristics of sorbitol plasticised cellulose acetate/starch bioplastics,†Chem Eng Trans, vol. 106, pp. 259–264, 2023, doi: 10.3303/CET23106044.
H. Tian, D. Liu, Y. Yao, S. Ma, X. Zhang, and A. Xiang, “Effect of sorbitol plasticizer on the structure and properties of melt processed polyvinyl alcohol films,†J Food Sci, vol. 82, no. 12, pp. 2926–2932, Dec. 2017, doi: 10.1111/1750-3841.13950.
M. M. Harussani, S. M. Sapuan, A. H. M. Firdaus, Y. A. El-Badry, E. E. Hussein, and Z. M. El-Bahy, “Determination of the tensile properties and biodegradability of cornstarch-based biopolymers plasticized with sorbitol and glycerol,†Polymers (Basel), vol. 13, no. 21, p. 3709, Oct. 2021, doi: 10.3390/polym13213709.
A. A. B. A. Mohammed et al., “Effect of various plasticizers in different concentrations on physical, thermal, mechanical, and structural properties of wheat starch-based films,†Polymers (Basel), vol. 15, no. 1, p. 63, Dec. 2022, doi: 10.3390/polym15010063.
Z. Jaderi, F. Tabatabaee Yazdi, S. A. Mortazavi, and A. Koocheki, “Effects of glycerol and sorbitol on a novel biodegradable edible film based on Malva sylvestris flower gum,†Food Sci Nutr, vol. 11, no. 2, pp. 991–1000, Feb. 2023, doi: 10.1002/fsn3.3134.
M. Sanyang, S. Sapuan, M. Jawaid, M. Ishak, and J. Sahari, “Effect of plasticizer type and concentration on tensile, thermal and barrier properties of biodegradable films based on sugar palm (Arenga pinnata) Starch,†Polymers (Basel), vol. 7, no. 6, pp. 1106–1124, Jun. 2015, doi: 10.3390/polym7061106.
Z. Eslami, S. Elkoun, M. Robert, and K. Adjallé, “A Review of the effect of plasticizers on the physical and mechanical properties of alginate-based films,†Molecules, vol. 28, no. 18, p. 6637, Sep. 2023, doi: 10.3390/molecules28186637.
F. Yang, S. Shi, M. Nie, and Q. Wang, “Freeze-drying-promoted effect of sorbitol plasticization for melt processing of poly(vinyl alcohol),†Ind Eng Chem Res, Oct. 2022, doi: 10.1021/acs.iecr.2c02711.
P. yadav, G. Beniwal, and K. K. Saxena, “A review on pore and porosity in tissue engineering,†Mater Today Proc, vol. 44, pp. 2623–2628, 2021, doi: 10.1016/j.matpr.2020.12.661.
Z. Zhang, Y. Feng, L. Wang, D. Liu, C. Qin, and Y. Shi, “A review of preparation methods of porous skin tissue engineering scaffolds,†Mater Today Commun, vol. 32, p. 104109, Aug. 2022, doi: 10.1016/j.mtcomm.2022.104109.
DOI: http://dx.doi.org/10.30811/jpl.v23i6.7562
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional .
Alamat Surat :
Politeknik Negeri LhokseumaweJl. Banda Aceh-Medan Km 280
Buketrata, Lhokseumawe, 24301, Aceh, Indonesia