Comparative time analysis of digital photogrammetry software using AI methods for design recovery in digital manufacturing

P. Paryanto; M. Faizin; R. Rusnaldy

doi:10.30811/jpl.v23i6.6846

Comparative time analysis of digital photogrammetry software using AI methods for design recovery in digital manufacturing

P. Paryanto, M. Faizin, R. Rusnaldy

Abstract

This research aimed to investigate the time efficiency of integrating traditional digital photogrammetry software compared to Artificial Intelligence (AI) in Reverse Engineering (RE). The investigation was conducted through a systematic comparison of the selected digital photogrammetry software and an AI-based method, using various objects for evaluation. Although high accuracy can be achieved with traditional photogrammetry software, the process is time-consuming, particularly for complex or large objects. Therefore, this research presents a timing analysis that demonstrates the efficiency advantages of AI-based methods over traditional digital photogrammetry software. The results showed that AI, by automating the reconstruction process, has the potential to reduce the time required for RE significantly. Moreover, the results of the 3D piston model using AI Google Colabâ„¢ were close to Agisoft Metashape, showing the potential use of alternative software as a solution in the RE process. These results suggested that AI-based methods could reshape the RE landscape, offering crucial efficiency gains for industries with rapid prototyping and just-in-time product development.

Keywords

Digital Manufacturing; Modeling; Piston; Photogrammetry; RE; AI

Full Text:

PDF

References

. Kalogirou, S. (2003). Artificial intelligence for the modeling and control of combustion processes: a review. Progress in Energy and Combustion Science, 29, 515-566.

. Dou, F., Ye, J., Yuan, G., Lu, Q., Niu, W., Sun, H., ... & Song, W. (2023). Towards artificial general intelligence (agi) in the internet of things (iot): Opportunities and challenges. arXiv preprint arXiv:2309.07438.

. He, L., Jing, P., Hu, X., Sun, R., & Dong, J. (2023, October). Research on UI and Intelligent Product Design of Prefabrication System for Urban white-collar Work Meals under the Background of Healthy China. In Proceedings of the 2nd International Conference on Intelligent Design and Innovative Technology (ICIDIT 2023) (Vol. 10, p. 370). Springer Nature.

. Wildenschild, D., & Sheppard, A. P. (2013). X-ray imaging and analysis techniques for quantifying pore-scale structure and processes in subsurface porous medium systems. Advances in Water resources, 51, 217-246.

. Buonamici, F., Carfagni, M., Furferi, R., Governi, L., Lapini, A., & Volpe, Y. (2018). Reverse engineering modeling methods and tools: a survey. Computer-Aided Design and Applications, 15(3), 443-464.

. Kaufman, J. (2018). Replication and fabrication of crafted and natural artifacts by reverse engineering using single camera photogrammetry. Lancaster University (United Kingdom).

. Ding, Z., Liu, S., Liao, L., & Zhang, L. (2019). A digital construction framework integrating building information modeling and reverse engineering technologies for renovation projects. Automation in Construction, 102, 45-58.

. Bhatla, A., Choe, S. Y., Fierro, O., & Leite, F. (2012). Evaluation of accuracy of as-built 3D modeling from photos taken by handheld digital cameras. Automation in construction, 28, 116-127.

. Shang, H., Liu, C., & Wang, R. (2022). Measurement methods of 3D shape of large-scale complex surfaces based on computer vision: A review. Measurement, 197, 111302.

. Singh, R., Wu, W., Wang, G., & Kalra, M. K. (2020). Artificial intelligence in image reconstruction: the change is here. Physica Medica, 79, 113-125.

. Baduge, S. K., Thilakarathna, S., Perera, J. S., Arashpour, M., Sharafi, P., Teodosio, B., ... & Mendis, P. (2022). Artificial intelligence and smart vision for building and construction 4.0: Machine and deep learning methods and applications. Automation in Construction, 141, 104440.

. Bumbaca, S., & Borgogno-Mondino, E. (2024). Supporting Screening of New Plant Protection Products through a Multispectral Photogrammetric Approach Integrated with AI. Agronomy, 14(2), 306.

. Å agi, G., LuliÄ‡, Z., & Mahalec, I. (2015). Reverse engineering. Concurrent Engineering in the 21st Century: Foundations, Developments and Challenges, 319-353.

. Shahid, A. H., & Khattak, W. A. (2022). Improving Patient Care with Machine Learning: A Game-Changer for Healthcare. Applied Research in Artificial Intelligence and Cloud Computing, 5(1), 150-163.

. Yang, M., Kumar, P., Bhola, J., & Shabaz, M. (2022). Development of image recognition software based on artificial intelligence algorithm for the efficient sorting of apple fruit. International Journal of System Assurance Engineering and Management, 13(Suppl 1), 322-330.

. Bohnett, E., Holmberg, J., Faryabi, S. P., An, L., Ahmad, B., Rashid, W., & Ostrowski, S. (2023). Comparison of two individual identification algorithms for snow leopards (Panthera uncia) after automated detection. Ecological Informatics, 77, 102214.

. Peterson, J. C., Abbott, J. T., & Griffiths, T. L. (2018). Evaluating (and improving) the correspondence between deep neural networks and human representations. Cognitive science, 42(8), 2648-2669.

. Berger, M., Tagliasacchi, A., Seversky, L. M., Alliez, P., Guennebaud, G., Levine, J. A., ... & Silva, C. T. (2017, January). A survey of surface reconstruction from point clouds. In Computer graphics forum (Vol. 36, No. 1, pp. 301-329).

. MartÃnez, S., Ortiz, J., & Gil, M. (2015). Geometric documentation of historical pavements using automated digital photogrammetry and high-density reconstruction algorithms. Journal of Archaeological Science, 53, 1-11.

. Castiglioni, I., Rundo, L., Codari, M., Di Leo, G., Salvatore, C., Interlenghi, M., ... & Sardanelli, F. (2021). AI applications to medical images: From machine learning to deep learning. Physica Medica, 83, 9-24.

. Falkingham, P. L. (2012). Acquisition of high resolution three-dimensional models using free, open-source, photogrammetric software. Palaeontologia electronica, 15(1), 15.

. Elkhrachy, I. (2019). Modeling and visualization of three-dimensional objects using low-cost terrestrial photogrammetry. International Journal of Architectural Heritage.

. Luhmann, T., Robson, S., Kyle, S., & Boehm, J. (2023). Close-range photogrammetry and 3D imaging. Walter de Gruyter GmbH & Co KG.

. J. Mills, D. Barber, Geomatics techniques for structural surveying, Journal of Surveying Engineering 130 (2) (2004), 56â€“64.

. D.V. Jauregui, K.R. White, Bridge inspection using virtual reality and photogrammetry, in: Inspection and Monitoring Techniques for Bridges and Civil Structures, Woodhead Publishing Limited, Abington Hall, Abington, Cambridge CB 1 6AH, England, pp. 216â€“246.

. J. Albert, H. Maas, A. Schade, W. Schwarz, Pilot studies on photogrammetric bridge deformation measurement, 2002. (Accessed July 2005).

. Faizin, M., Paryanto, P., Cahyo, N., & Rusnaldy, R. (2024). Investigating the Accuracy of Boat Propeller Blade Components with Reverse Engineering Approach using Photogrammetry Method. Results in Engineering, 102293.

. Verhoeven, G., Doneus, M., Briese, C., & Vermeulen, F. (2012). Mapping by matching: a computer vision-based approach to fast and accurate georeferencing of archaeological aerial photographs. Journal of Archaeological Science, 39(7), 2060-2070.

. Konstantzos, I., Tzempelikos, A., & Chan, Y. C. (2015). Experimental and simulation analysis of daylight glare probability in offices with dynamic window shades. Building and Environment, 87, 244-254.

. Ren, C., Jiao, Y., Liu, Y., & Shang, H. (2024). Optimal camera focal length detection method for GPS-supported bundle adjustment in UAV photogrammetry. Measurement, 228, 114329.

. Liang, Y., Wang, W., Zhang, Z., Xing, H., Wang, C., Zhang, Z., ... & Gao, D. (2023). Effect of Material Selection and Surface Texture on Tribological Properties of Key Friction Pairs in Water Hydraulic Axial Piston Pumps: A Review. Lubricants, 11(8), 324.

. Wang, Q., & Kim, M. K. (2019). Applications of 3D point cloud data in the construction industry: A fifteen-year review from 2004 to 2018. Advanced engineering informatics, 39, 306-319.

. Xu, Z., Kang, R., & Lu, R. (2020). 3D reconstruction and measurement of surface defects in prefabricated elements using point clouds. Journal of Computing in Civil Engineering, 34(5), 04020033.

. Stucker, C., & Schindler, K. (2022). ResDepth: A deep residual prior for 3D reconstruction from high-resolution satellite images. ISPRS Journal of Photogrammetry and Remote Sensing, 183, 560-580.

DOI: http://dx.doi.org/10.30811/jpl.v23i6.6846