Material and process parameter optimization for dimensional accuracy in Fused Deposition Modeling 3D printing

Rizqi Ilmal Yaqin; Juniawan Preston Siahaan; Mula Tumpu; Bagas Prakoso; Ade Hermawan; Febi Luthfiani; Barokah Barokah; Ahmad Kurniawan

doi:10.30811/jpl.v22i6.5716

Material and process parameter optimization for dimensional accuracy in Fused Deposition Modeling 3D printing

Rizqi Ilmal Yaqin, Juniawan Preston Siahaan, Mula Tumpu, Bagas Prakoso, Ade Hermawan, Febi Luthfiani, Barokah Barokah, Ahmad Kurniawan

Abstract

The production of complex machine components requires advanced and accurate techniques. Achieving optimal quality through 3D printing involves carefully examining the process parameters. However, many studies have not thoroughly explored the impact of these parameters on parts produced using Fused Deposition Modeling (FDM) 3D printing. This study evaluates how process parameters and material variations affect the dimensional accuracy of printed parts. The study focuses on input variables such as material type, infill density, infill pattern, and raster angle. Using the fractional L₉ Taguchi method, the optimal settings identified were PLA+ material, 80% infill density, an infill grid pattern, and a 0° raster angle, resulting in a 1.39%-dimensional deviation and an S/N ratio of -3.29 dB. ANOVA analysis reveals material type as the most significant factor, contributing 49.81% to performance. These findings, complemented by statistical analyses, can guide decision-making in industrial applications and serve as a reference for selecting FDM 3D printing settings related to dimensional accuracy to print components in the industry.

Keywords

3D printing, ANOVA, percentage deviation, signal-to-noise.

Full Text:

PDF

References

S. Mahmood, A. J. Qureshi, and D. Talamona, ‘Taguchi based process optimization for dimension and tolerance control for fused deposition modelling’, Addit Manuf, vol. 21, pp. 183–190, May 2018, doi: 10.1016/j.addma.2018.03.009.

N. Naveed, ‘Investigate the effects of process parameters on material properties and microstructural changes of 3D-printed specimens using fused deposition modelling (FDM)’, Materials Technology, vol. 36, no. 5, pp. 317–330, 2021, doi: 10.1080/10667857.2020.1758475.

N. Naveed, ‘Investigating the material properties and microstructural changes of fused filament fabricated PLA and tough-PLA parts’, Polymers (Basel), vol. 13, no. 9, May 2021, doi: 10.3390/polym13091487.

S. Rouf, A. Raina, M. Irfan Ul Haq, N. Naveed, S. Jeganmohan, and A. Farzana Kichloo, ‘3D printed parts and mechanical properties: Influencing parameters, sustainability aspects, global market scenario, challenges and applications’, Jul. 01, 2022, KeAi Communications Co. doi: 10.1016/j.aiepr.2022.02.001.

A. Raina, M. I. U. Haq, M. Javaid, S. Rab, and A. Haleem, ‘4D Printing for Automotive Industry Applications’, Dec. 01, 2021, Springer. doi: 10.1007/s40033-021-00284-z.

V. Wankhede, D. Jagetiya, A. Joshi, and R. Chaudhari, ‘Experimental investigation of FDM process parameters using Taguchi analysis’, in Materials Today: Proceedings, Elsevier Ltd, 2019, pp. 2117–2120. doi: 10.1016/j.matpr.2019.09.078.

F. Gorana, K. Kumar Sahu, and Y. Kumar Modi, ‘Parameter optimization for dimensional accuracy of fused deposition modelling parts’, in Materials Today: Proceedings, Elsevier Ltd, Jan. 2023, pp. 640–646. doi: 10.1016/j.matpr.2022.12.068.

B. Rankouhi, S. Javadpour, F. Delfanian, and T. Letcher, ‘Failure Analysis and Mechanical Characterization of 3D Printed ABS With Respect to Layer Thickness and Orientation’, Journal of Failure Analysis and Prevention, vol. 16, no. 3, pp. 467–481, Jun. 2016, doi: 10.1007/s11668-016-0113-2.

X. J. Wan, C. H. Xiong, X. F. Wang, X. M. Zhang, and Y. L. Xiong, ‘Analysis-synthesis of dimensional deviation of the machining feature for discrete-part manufacturing processes’, Int J Mach Tools Manuf, vol. 49, no. 15, pp. 1214–1233, Dec. 2009, doi: 10.1016/j.ijmachtools.2009.07.014.

K. Kumar and H. Singh, ‘Parametric Optimization of the 3D Printing Process for Dimensional Accuracy of Biopolymer Parts Using the Grey–Taguchi Method’, Iranian Journal of Science and Technology - Transactions of Mechanical Engineering, vol. 48, no. 3, pp. 1101–1116, Sep. 2024, doi: 10.1007/s40997-023-00696-0.

A. H. Alami et al., ‘Additive manufacturing in the aerospace and automotive industries: Recent trends and role in achieving sustainable development goals’, Nov. 01, 2023, Ain Shams University. doi: 10.1016/j.asej.2023.102516.

I. Ullah, M. Wasif, and M. Tufail, ‘Analysis of shrinkage and dimensional accuracy of additively manufactured tooling for the composite manufacturing’, International Journal on Interactive Design and Manufacturing, vol. 18, no. 2, pp. 673–684, Mar. 2024, doi: 10.1007/s12008-023-01640-x.

S. Vyavahare, S. Teraiya, D. Panghal, and S. Kumar, ‘Fused deposition modelling: a review’, Jan. 08, 2020, Emerald Group Holdings Ltd. doi: 10.1108/RPJ-04-2019-0106.

B. N. Dhanunjayarao and N. V. Swamy Naidu, ‘Assessment of dimensional accuracy of 3D printed part using resin 3D printing technique’, in Materials Today: Proceedings, Elsevier Ltd, Jan. 2022, pp. 1608–1614. doi: 10.1016/j.matpr.2022.03.148.

B. Zharylkassyn, A. Perveen, and D. Talamona, ‘Effect of process parameters and materials on the dimensional accuracy of FDM parts’, in Materials Today: Proceedings, Elsevier Ltd, 2021, pp. 1307–1311. doi: 10.1016/j.matpr.2020.11.332.

E. R. Biglete et al., ‘Dimensional Accuracy Evaluation of 3D - Printed Parts Using a 3D Scanning Surface Metrology Technique’, in IEEE Control and System Graduate Research Colloquium, IEEE, 2020, pp. 185–190.

A. Alafaghani and A. Qattawi, ‘Investigating the effect of fused deposition modeling processing parameters using Taguchi design of experiment method’, J Manuf Process, vol. 36, pp. 164–174, Dec. 2018, doi: 10.1016/j.jmapro.2018.09.025.

K. E. Aslani, K. Kitsakis, J. D. Kechagias, N. M. Vaxevanidis, and D. E. Manolakos, ‘On the application of grey Taguchi method for benchmarking the dimensional accuracy of the PLA fused filament fabrication process’, SN Appl Sci, vol. 2, no. 6, Jun. 2020, doi: 10.1007/s42452-020-2823-z.

M. Vishwas, C. K. Basavaraj, and M. Vinyas, ‘Experimental Investigation using Taguchi Method to Optimize Process Parameters of Fused Deposition Modeling for ABS and Nylon Materials’, in Materials Today: Proceedings, 2018, pp. 7106–7114. [Online]. Available: www.sciencedirect.comwww.materialstoday.com/proceedings2214-7853

T. M. Joseph et al., ‘3D printing of polylactic acid: recent advances and opportunities’, Mar. 01, 2023, Springer Science and Business Media Deutschland GmbH. doi: 10.1007/s00170-022-10795-y.

O. A. Mohamed, S. H. Masood, and J. L. Bhowmik, ‘Optimization of fused deposition modeling process parameters for dimensional accuracy using I-optimality criterion’, Measurement (Lond), vol. 81, pp. 174–196, Mar. 2016, doi: 10.1016/j.measurement.2015.12.011.

A. K. Sood, R. K. Ohdar, and S. S. Mahapatra, ‘Improving dimensional accuracy of Fused Deposition Modelling processed part using grey Taguchi method’, Mater Des, vol. 30, no. 10, pp. 4243–4252, Dec. 2009, doi: 10.1016/j.matdes.2009.04.030.

P. A. Palacios, A. Velazquez, R. Zelaya, and A. E. Patterson, ‘Shore hardness of as-printed and dehydrated thermoplastic materials made using fused filament fabrication (FFF)’, Mater Today Commun, vol. 35, Jun. 2023, doi: 10.1016/j.mtcomm.2023.105971.

A. A. Ansari and M. Kamil, ‘Analysis of dimensional quality in 3D printed polylactic acid parts fabricated by fused deposition modeling’, in Materials Today: Proceedings, Elsevier Ltd, 2021, pp. 2281–2287. doi: 10.1016/j.matpr.2021.04.219.

M. Ramesh and K. Panneerselvam, ‘Mechanical investigation and optimization of parameter selection for Nylon material processed by FDM’, in Materials Today: Proceedings, Elsevier Ltd, 2019, pp. 9303–9307. doi: 10.1016/j.matpr.2020.02.697.

N. Lokesh, B. A. Praveena, J. Sudheer Reddy, V. K. Vasu, and S. Vijaykumar, ‘Evaluation on effect of printing process parameter through Taguchi approach on mechanical properties of 3D printed PLA specimens using FDM at constant printing temperature’, in Materials Today: Proceedings, Elsevier Ltd, 2022, pp. 1288–1293. doi: 10.1016/j.matpr.2021.11.054.

S. R. Rajpurohit and H. K. Dave, ‘Analysis of tensile strength of a fused filament fabricated PLA part using an open-source 3D printer’, International Journal of Advanced Manufacturing Technology, vol. 101, no. 5–8, pp. 1525–1536, Apr. 2019, doi: 10.1007/s00170-018-3047-x.

M. Strano, K. Rane, G. Herve, and A. Tosi, ‘Determination of process induced dimensional variations of ceramic parts, 3d printed by extrusion of a powder-binder feedstock’, in Procedia Manufacturing, Elsevier B.V., 2019, pp. 560–565. doi: 10.1016/j.promfg.2019.06.220.

C. Camposeco-Negrete, J. Varela-Soriano, and J. J. Rojas-Carreón, ‘The effects of printing parameters on quality, strength, mass, and processing time of polylactic acid specimens produced by additive manufacturing’, Progress in Additive Manufacturing, vol. 6, no. 4, pp. 821–840, Dec. 2021, doi: 10.1007/s40964-021-00198-y.

W. Zhang et al., ‘Characterization of residual stress and deformation in additively manufactured ABS polymer and composite specimens’, Compos Sci Technol, vol. 150, pp. 102–110, Sep. 2017, doi: 10.1016/j.compscitech.2017.07.017.

C. Kousiatza and D. Karalekas, ‘In-situ monitoring of strain and temperature distributions during fused deposition modeling process’, Mater Des, vol. 97, pp. 400–406, May 2016, doi: 10.1016/j.matdes.2016.02.099.

S. Sunny, H. Chen, A. Malik, and H. Lu, ‘Influence of residual stress and fluid–structure interaction on the impact behavior of fused filament fabrication components’, Addit Manuf, vol. 37, Jan. 2021, doi: 10.1016/j.addma.2020.101662.

H. Alzyod and P. Ficzere, ‘Optimizing fused filament fabrication process parameters for quality enhancement of PA12 parts using numerical modeling and taguchi method’, Heliyon, vol. 9, no. 3, Mar. 2023, doi: 10.1016/j.heliyon.2023.e14445.

T. K. Singh, A. K. Birru, and K. N. Singh, ‘Optimizing the printing parameters for dimensional accuracy of distal femur bone by using Taguchi’s method’, Journal of Engineering and Applied Science, vol. 71, no. 1, Dec. 2024, doi: 10.1186/s44147-023-00338-x.

A. Alafaghani, A. Qattawi, B. Alrawi, and A. Guzman, ‘Experimental Optimization of Fused Deposition Modelling Processing Parameters: A Design-for-Manufacturing Approach’, in Procedia Manufacturing, Elsevier B.V., 2017, pp. 791–803. doi: 10.1016/j.promfg.2017.07.079.

S. N. S. W. Suaidi, M. A. Azizul, S. Sulaiman, and T. Y. Hao, ‘Effect of Fused Deposition Modelling Process Parameters on the Quality of ABS Product’, Journal of Industry, Engineering and Innovation, vol. 2, no. 1, pp. 1–9, 2020.

O. Tunçel, ‘The influence of the raster angle on the dimensional accuracy of FDM-printed PLA, PETG, and ABS tensile specimens’, European Mechanical Science, vol. 8, no. 1, pp. 11–18, Mar. 2024, doi: 10.26701/ems.1392387.

M. Darsin, N. A. Mahardika, and G. Jatisukamto, ‘Effect of 3D Printing Parameters on Dimensional Accuracy Using eSteel Filaments’, 2021.

D. Hyndhavi, G. Raghu Babu, S. B. Murthy, and D. Hyndhavi, ‘Investigation of Dimensional Accuracy and Material Performance in Fused Deposition Modeling’, in Materials Today: Proceedings, 2018, pp. 23508–23517. [Online]. Available: www.sciencedirect.comwww.materialstoday.com/proceedings2214-7853

H. Hasdiansah, R. I. Yaqin, P. Pristiansyah, M. L. Umar, and B. H. Priyambodo, ‘FDM-3D printing parameter optimization using taguchi approach on surface roughness of thermoplastic polyurethane parts’, International Journal on Interactive Design and Manufacturing, vol. 17, no. 6, pp. 3011–3024, Dec. 2023, doi: 10.1007/s12008-023-01304-w.

J. Nagendra, M. K. Srinath, S. Sujeeth, K. S. Naresh, and M. S. Ganesha Prasad, ‘Optimization of process parameters and evaluation of surface roughness for 3D printed nylon-aramid composite’, in Materials Today: Proceedings, Elsevier Ltd, 2021, pp. 674–682. doi: 10.1016/j.matpr.2020.10.609.

A. Farzadi, M. Solati-Hashjin, M. Asadi-Eydivand, and N. A. A. Osman, ‘Effect of layer thickness and printing orientation on mechanical properties and dimensional accuracy of 3D printed porous samples for bone tissue engineering’, PLoS One, vol. 9, no. 9, Sep. 2014, doi: 10.1371/journal.pone.0108252.

M. Hikmat, S. Rostam, and Y. M. Ahmed, ‘Investigation of tensile property-based Taguchi method of PLA parts fabricated by FDM 3D printing technology’, Results in Engineering, vol. 11, no. 100264, 2021, doi: 10.1016/j.rineng.2021.100264.

L. Yi, T. Chen, S. Ehmsen, C. Gläßner, and J. C. Aurich, ‘A study on impact factors of the energy consumption of the fused deposition modeling process using two-level full factorial experiments’, in Procedia CIRP, Elsevier B.V., 2020, pp. 79–84. doi: 10.1016/j.procir.2020.03.036.

M. A. Kumar, M. S. Khan, and S. B. Mishra, ‘Effect of machine parameters on strength and hardness of FDM printed carbon fiber reinforced PETG thermoplastics’, in Materials Today: Proceedings, Elsevier Ltd, Jan. 2020, pp. 975–983. doi: 10.1016/j.matpr.2020.01.291.

N. Garg, V. Rastogi, and P. Kumar, ‘Process parameter optimization on the dimensional accuracy of additive manufacture Thermoplastic Polyurethane (TPU) using RSM’, Mater Today Proc, vol. 62, pp. 94–99, Jan. 2022, doi: 10.1016/j.matpr.2022.02.309.

A. D. Tura and H. B. Mamo, ‘Characterization and parametric optimization of additive manufacturing process for enhancing mechanical properties’, Heliyon, vol. 8, no. 7, 2022, doi: 10.1016/j.heliyon.2022.e09832.

DOI: http://dx.doi.org/10.30811/jpl.v22i6.5716