Design optimisation of a shell-and-tube heat exchanger for cold energy recovery in LNG regasification

Haiqal Irfansyah, Sarwo Edhy Sofyan, Razali Razali, Akram Tamlicha

Abstract


The efficient utilisation of energy resources is a key concern in industrial operations, particularly within the liquefied natural gas (LNG) sector. During the regasification process, substantial amounts of cold energy are released as LNG transitions from its liquid to gaseous state. This cold energy, often wasted by being discharged into the environment, presents an opportunity for recovery and use in various applications such as cold storage and data centre cooling. While the utilisation of LNG cold energy has been widely explored for specific applications, including data centre cooling, electricity generation, and cryogenic systems, existing studies typically focus on individual technologies rather than a comprehensive optimisation of heat exchanger design for cold energy recovery. Therefore, there remains a significant gap in optimising heat exchanger configurations that maximise cold energy extraction while enabling broader industrial integration. This study addresses that gap by optimising the design of a shell-and-tube heat exchanger to recover cold energy from the LNG regasification process at PT Perta Arun Gas, based on an LNG flow rate of 30 million standard cubic feet per day (MMSCFD). The design optimisation was performed using Aspen Exchanger Design and Rating (Aspen EDR) software. Propane was selected as the secondary fluid for extracting cold energy from LNG due to its exceptionally low-temperature performance (freezing point: -188°C) and proven safety in food-related environments. The shell-and-tube heat exchanger design was optimised by the standards and configurations defined by the TEMA designation. The resulting optimal configuration comprises a shell-and-tube heat exchanger with a tube diameter of 13 mm, a tube length of 2,550 mm, a shell diameter of 162.74 mm, a baffle pitch of 135 mm, 16 baffles, a single tube pass, and 54 tubes. This design achieves a heat transfer rate of 478.5 kW, with an estimated cost of USD 23,895.


Keywords


Shell and tube heat exchanger, LNG, design and optimization, cold energy

Full Text:

PDF

References


J. Pan, R. Li, T. Lv, and G. Wu, “Thermal performance analysis of SuperORV heat transfer tube at supercritical pressure,†J. Nat. Gas Sci. Eng., vol. 29, pp. 488–496, 2016, doi: https://doi.org/10.1016/j.jngse.2016.01.030.

H. Cheng, Y. Ju, and Y. Fu, “Thermal performance calculation with heat transfer correlations and numerical simulation analysis for typical LNG open rack vaporizer,†Appl. Therm. Eng., vol. 149, pp. 1069–1079, 2019, doi: https://doi.org/10.1016/j.applthermaleng.2018.11.044.

S. Cao, T. Luan, P. Zuo, X. Si, P. Xie, and Y. Guo, “Simulation and Economic Benefit Analysis of Carburetor Combined Transport in Winter at a Liquefied Natural Gas Receiving Station,†2025. doi: 10.3390/en18020276.

C. Qi, W. Wang, B. Wang, Y. Kuang, and J. Xu, “Performance analysis of submerged combustion vaporizer,†J. Nat. Gas Sci. Eng., vol. 31, pp. 313–319, 2016, doi: https://doi.org/10.1016/j.jngse.2016.03.003.

K. Huang, X. Zhou, C. Huang, L. Wang, D. Li, and J. Zhao, “Heat Transfer Analysis and Operation Optimization of an Intermediate Fluid Vaporizer,†2023. doi: 10.3390/en16031383.

L. N. Guo, B. L. An, L. B. Chen, J. X. Chen, J. J. Wang, and Y. Zhou, “Progress of liquefied natural gas cold energy utilization,†IOP Conf. Ser. Mater. Sci. Eng., vol. 502, no. 1, p. 12148, 2019, doi: 10.1088/1757-899X/502/1/012148.

J. Pospíšil, P. Charvát, O. Arsenyeva, L. KlimeÅ¡, M. Å piláÄek, and J. J. KlemeÅ¡, “Energy demand of liquefaction and regasification of natural gas and the potential of LNG for operative thermal energy storage,†Renew. Sustain. Energy Rev., vol. 99, pp. 1–15, 2019, doi: https://doi.org/10.1016/j.rser.2018.09.027.

M. Zonfrilli, M. Facchino, R. Serinelli, M. Chesti, M. De Falco, and M. Capocelli, “Thermodynamic analysis of cold energy recovery from LNG regasification,†J. Clean. Prod., vol. 420, p. 138443, 2023, doi: https://doi.org/10.1016/j.jclepro.2023.138443.

A. Soh, Z. Huang, Y. Shao, M. R. Islam, and K. J. Chua, “On the study of a thermal system for continuous cold energy harvesting and supply from LNG regasification,†Energy, vol. 275, p. 127387, 2023, doi: https://doi.org/10.1016/j.energy.2023.127387.

T. He, J. Ma, H. Ma, and T. Jin, “Chapter 14 - Exploiting cold energy associated with LNG regasification processes,†in The Fundamentals and Sustainable Advances in Natural Gas Science and Engineering, vol. 3, D. A. Wood and J. B. T.-S. L. N. G. Cai, Eds., Elsevier, 2024, pp. 399–424. doi: https://doi.org/10.1016/B978-0-443-13420-3.00011-1.

S. E. Sofyan et al., “The potential of cold energy extraction from a power plant regasification terminal for cold storage application,†IOP Conf. Ser. Mater. Sci. Eng., vol. 1082, no. 1, p. 12007, 2021, doi: 10.1088/1757-899X/1082/1/012007.

F. Yehia et al., “Integration of the single-effect mixed refrigerant cycle with liquified air energy storage and cold energy of LNG regasification: Energy, exergy, and efficiency prospectives,†Energy, vol. 306, p. 132567, 2024, doi: https://doi.org/10.1016/j.energy.2024.132567.

M. H. Noor Akashah, N. E. Mohammad Rozali, S. Mahadzir, and P. Y. Liew, “Utilization of Cold Energy from LNG Regasification Process: A Review of Current Trends,†2023. doi: 10.3390/pr11020517.

W. Gazda, “Application possibilities of the strategies of the air blast–cryogenic cooling process,†Energy, vol. 62, pp. 113–119, 2013, doi: https://doi.org/10.1016/j.energy.2013.06.054.

J. Lim, Y. Kim, H. Cho, J. Lee, and J. Kim, “Novel process design for waste energy recovery of LNG power plants for CO2 capture and storage,†Energy Convers. Manag., vol. 277, p. 116587, 2023, doi: https://doi.org/10.1016/j.enconman.2022.116587.

S. Yadav, S. Seethamraju, and R. Banerjee, “Cold energy recovery from liquefied natural gas regasification process for data centre cooling and power generation,†Energy, vol. 283, p. 128481, 2023, doi: https://doi.org/10.1016/j.energy.2023.128481.

X. Zheng et al., “Performance analysis and multi-objective optimization for an integrated air separation, power generation, refrigeration and ice thermal storage system based on the LNG cold energy utilization,†Int. J. Refrig., vol. 168, pp. 521–536, 2024, doi: https://doi.org/10.1016/j.ijrefrig.2024.07.008.

D. Cai, Y. Zhao, Y. Wang, H. Liu, Y. Liang, and D. Hu, “Comparative analysis: Exergetic and economic assessment of LNG cold energy power generation systems with different cold utilization methods,†Therm. Sci. Eng. Prog., vol. 54, p. 102844, 2024, doi: https://doi.org/10.1016/j.tsep.2024.102844.

X. Wang, M. Zhu, W. Han, Z. Wu, and S. Chen, “Cold energy utilization analysis of cryogenic dual-energy heavy-duty trucks coupled LH2/LNG cooled shield,†Int. J. Hydrogen Energy, vol. 71, pp. 387–399, 2024, doi: https://doi.org/10.1016/j.ijhydene.2024.05.135.

A. Franco and C. Giovannini, “Optimal design of direct expansion systems for electricity production by LNG cold energy recovery,†Energy, vol. 280, p. 128173, 2023, doi: https://doi.org/10.1016/j.energy.2023.128173.

W. Wu, S. Xie, J. Tan, and T. Ouyang, “An integrated design of LNG cold energy recovery for supply demand balance using energy storage devices,†Renew. Energy, vol. 183, pp. 830–848, 2022, doi: https://doi.org/10.1016/j.renene.2021.11.066.




DOI: http://dx.doi.org/10.30811/jpl.v23i3.5589

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Lisensi Creative Commons

Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional .

 

Alamat Surat :

Politeknik Negeri Lhokseumawe
Jl. Banda Aceh-Medan Km 280
Buketrata, Lhokseumawe, 24301, Aceh, Indonesia