Characterization of the Mechanical Properties of Fiberglass/Epoxy Prepreg Composites as Horizontal Axis Wind Turbine Blade Material: Influence of Fiber Orientation on Impact and Bending Strength
Abstract
Keywords
Full Text:
PDFReferences
E. W. Febriyanto and E. Widodo, “Analysis Of Sansevieria Fiber Composite With Naoh Alkalization Analisa Komposit Serat Lidah Mertua (Sansevieria) Dengan Perlakuan Alkali Naoh,” vol. 0672, no. c, pp. 959–966, 2022.
A. Riyanto and M. A. Irfa’I, “Pengaruh fraksi volume serat komposit hybrid berpenguat serat bambu acak dan serat e-glass anyam dengan resin polyester terhadap kekuatan bending,” Jurnal Teknik Mesin, vol. 06, no. 02, pp. 55–60, 2018.
B. Istana, I. M. L. Batan, Sutikno, S. Khem, U. Ubaidillah, and I. Yahya, “Influence of Particle Size and Bulk Density on Sound Absorption Performance of Oil Palm Frond-Reinforced Composites Particleboard,” Polymers (Basel), vol. 15, no. 3, p. 510, Jan. 2023, doi: 10.3390/polym15030510.
E. A. O. Al-Bahadly, “The Mechanical Properties of Natural Fiber Composites,” p. 245, 2013.
Bharath KN, Swamy RP, and Mohan Kumar GC, “Experimental studies on biodegradable and swelling characteristics of natural fibers composites,” International Journal of, 2010, doi: 10.9735/0975-3710.2.1.1-4.
D. H. Mueller and A. Krobjilowski, “New discovery in the properties of composites reinforced with natural fibers,” Journal of Industrial Textiles, vol. 33, no. 2, pp. 111–129, 2003, doi: 10.1177/152808303039248.
M. Rajesh, M. T. H. Sultan, M. Uthayakumar, K. Jayakrishna, and A. U. M. Shah, “Dynamic behaviour of woven bio fiber composite,” Bioresources, vol. 13, no. 1, pp. 1951–1960, 2018, doi: 10.15376/biores.13.1.1951-1960.
D. Sarifah, “Pengaruh Vinil Ester Terhadap Sifat Mekanik Dan Ketahanan Termal Polimer Blend Epoksi/Vinil Ester Sebagai Material Kandidat Printed Circuit Board (Pcb),” pp. 19–22, 2016.
L. Widodo, K. Priyanto, and B. Margono, “Analisis Ketangguhan Impak Komposit Polyester Berpenguat Serat Daun Nanas Berdasarkan Jenis Anyaman,” Teknika, vol. 7, no. 4, pp. 217–227, 2022, doi: 10.52561/teknika.v7i4.207.
M. A. Muflikhun and Jamasri, “Proses Manufaktur dan Mekanika Komposit,” no. April, p. 23, 2022.
ASTM International, “Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics,” Annual Book of ASTM Standards, vol. 10, no. April, pp. 1–17, 2010, doi: 10.1520/D6110-10.1.
ASTM INTERNATIONAL, “Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials. D790,” Annual Book of ASTM Standards, pp. 1–12, 2002.
DOI: http://dx.doi.org/10.30811/jpl.v22i4.5363
Refbacks
- There are currently no refbacks.
![Creative Commons License](http://licensebuttons.net/l/by-sa/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional.
Mailing Address:
Jl. Banda Aceh-Medan
Km. 280,3, Buketrata, Mesjid Punteut, Blang Mangat,
Kota Lhokseumawe, 24301
Propinsi Aceh,
Indonesia