Effect of Perforated Aluminum on Calotropis Gigantea Fiber Material’s Ability to Absorption Sound

suhaeri suhaeri, Husaini Husaini, Muhammad Dirhamsyah, Iskandar Hasanuddin

Abstract


Plants fibers such as Calotropis gigantea (CG) are very suitable as noise reduction material. Therefore, this research aims to determine the sound absorption coefficient of CG in the 20 mm test sample and the effect of the perforated aluminum layer on its ability. It was carried out using a test sample made with a thickness of 20 mm and 100 mm in diameter. The thickness of aluminum was 0.3 mm with hole diameters of 1 mm, 1.5 mm, and 2.5 mm. During the experiment, every sample was heated and pressed in a mold for 10 minutes at 200oC. The test equipment used is a Bruel & Kjaer Type 4206 impedance tube with 100 mm in diameter. The sample was tested using the transfer function method ISO 10534-2:1998 at a frequency of 1/1 octave. The results indicated that the uncoated sample absorbed noise α = 0.01-0.07 (1-7)% higher than the sample coated with perforated aluminum. This showed that the Noise Reduction Coefficient (NRC) without aluminum coating can reduce noise by 29%, and the measured sample is categorized in class D.


Keywords


Calotropis gigantea fiber, perforated aluminum, sound absorption coefficient, impedance tube noise reduction coefficient.

Full Text:

PDF

References


N. D. Yilmaz et al., “Pengaruh Parameter Bahan dan

Perlakuan pada Kinerja Kontrol Kebisingan Nonwoven

Multifiber Terkompresi Jarum-Punched Tiga Lapis,” vol.

, pp. 2095–2106, 2012, doi: 10.1002/aplikasi.

R. K. S, T. Sangavi, R. R. S, S. Murali, and V. Sai, “Acoustic

Performance of Multilayer Nonwoven,” Int. Res. J. Eng.

Technol., vol. 07, no. June, pp. 6992–7004, 2020.

F. Asade and I. Isranuri, “Eksperimental Koefisien Serap

Bunyi Paduan,” e-Dinamis, vol. 6, no. 2, pp. 90–98, 2013.

L. Wang and F. S. Zhang, “Characterization of a novel sound

absorption material derived from waste agricultural film,”

Constr. Build. Mater., vol. 157, pp. 237–243, 2017, doi:

1016/j.conbuildmat.2017.07.192.

L. Cao, Q. Fu, Y. Si, B. Ding, and J. Yu, “Porous materials

for sound absorption,” Compos. Commun., vol. 10, no. May,

pp. 25–35, 2018, doi: 10.1016/j.coco.2018.05.001.

M. Sfiligoj, S. Hribernik, K. Stana, and T. Kree, “Plant

Fibres for Textile and Technical Applications,” Adv.

Agrophysical Res., 2013, doi: 10.5772/52372.

A. Ashori and Z. Bahreini, “Evaluation of calotropis gigantea

as a promising raw material for fiber-reinforced composite,”

J. Compos. Mater., vol. 43, no. 11, pp. 1297–1304, 2009,

doi: 10.1177/0021998308104526.

Y. M. Pell, “Pengaruh Fraksi Volume Terhadap

Karakterisasi Mekanik,” Semin. Nas. Sains dan Tek., vol.

, no. Sainstek, p. T 114-120, 2012.

G. Dilli Babu, K. Sivaji Babu, and P. Nanda Kishore,

“Tensile and wear behavior of calotropis gigentea fruit fiber

reinforced polyester composites,” Procedia Eng., vol. 97, pp.

–535, 2014, doi: 10.1016/j.proeng.2014.12.279.

M. D. Sukardan, D. Natawijaya, P. Prettyanti, C. Cahyadi,

and E. Novarini, “Karakterisasi Serat Dari Tanaman Biduri

(Calotropis Gigantea) Dan Identifikasi Kemungkinan

Pemanfaatannya Sebagai Serat Tekstil,” Arena Tekst., vol. 31,

no. 2, pp. 51–62, 2017, doi: 10.31266/at.v31i2.1986.

P. Narayanasamy et al., “Characterization of a novel natural

cellulosic fiber from Calotropis gigantea fruit bunch for

ecofriendly polymer composites,” Int. J. Biol. Macromol.,

vol. 150, pp. 793–801, 2020, doi:

1016/j.ijbiomac.2020.02.134.

J. Riset et al., “Kinerja akustik multilayer nonwoven,” pp.

–7004, 2020.

ISO-10534, “Determination of sound absorption

coefficient and impedance in impedance tubes,” Part 2

Transf. method, vol. ISO 10534, pp. 1–27, 1998.

S. S. Bhattacharya and D. V. Bihola, “Acoustic properties of

kapok fibre,” Int. J. Eng. Adv. Technol., vol. 9, no. 1, pp.

–2168, 2019, doi: 10.35940/ijeat.A9688.109119.

R. Eriningsih, M. Widodo, R. Marlina, and B. B. Tekstil,

“Baku Serat Alam Manufacture and Characterization of

Natural Fibers Sound,” Arena Tekst., vol. 29, no. 1, pp. 1–8,

E. Taban et al., “Study on the acoustic characteristics of

natural date palm fibres: Experimental and theoretical

approaches,” Build. Environ., vol. 161, no. July, p. 106274,

, doi: 10.1016/j.buildenv.2019.106274.

N. S. M. Shahid, M. A. Ahmad*, and F. L. Md Tahir,

“Sound Absorption Coefficient of Different Green Materials

Polymer on Noise Reduction,” Int. J. Innov. Technol. Explor.

Eng., vol. 9, no. 3, pp. 2773–2777, 2020, doi:

35940/ijitee.c9208.019320.

A. Putra, K. H. Or, M. Z. Selamat, M. J. M. Nor, M. H.

Hassan, and I. Prasetiyo, “Sound absorption of extracted

pineapple-leaf fibres,” Appl. Acoust., vol. 136, no. November

, pp. 9–15, 2018, doi: 10.1016/j.apacoust.2018.01.029.

H. R. Khaidar, I. D. Faryuni, and A. Asri, “Analisis

Kekuatan Tarik Serat Bundung (Scirpus grossus) Dengan

Variasi Perlakuan Alkali,” Prism. Fis., vol. 7, no. 3, p. 246,

, doi: 10.26418/pf.v7i3.37675.

R. del Rey, A. Uris, J. Alba, and P. Candelas,

“Characterization of sheep wool as a sustainable material for

acoustic applications,” Materials (Basel)., vol. 10, no. 11,

, doi: 10.3390/ma10111277.

M. Vasina, K. Monkova, P. P. Monka, D. Kozak, and J.

Tkac, “Study of the sound absorption properties of 3Dprinted open-porous ABS material structures,” Polymers

(Basel)., vol. 12, no. 5, 2020, doi:

3390/POLYM12051062.

P. Soltani, E. Taban, M. Faridan, S. E. Samaei, and S.

Amininasab, “Experimental and computational investigation

of sound absorption performance of sustainable porous

material: Yucca Gloriosa fiber,” Appl. Acoust., vol. 157, p.

, 2020, doi: 10.1016/j.apacoust.2019.106999.

B. Dwisetyo et al., “Implementation of Sound Absorption

Measurement Based on ISO and ASTM Standards in BSN,”

Pertem. dan Present. Ilm. Stand., vol. 2020, pp. 27–34, 2021,

doi: 10.31153/ppis.2020.50.

ISO 11654:1997, “Acoustics : sound absorbers for use in

buildings : rating of sound absorption,” p. 7, 1997.




DOI: http://dx.doi.org/10.30811/jpl.v22i4.5245

Refbacks

  • There are currently no refbacks.




Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 

  

    

    

Lisensi Creative Commons

Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional .

 

Alamat Surat :

Politeknik Negeri Lhokseumawe
Jl. Banda Aceh-Medan Km 280
Buketrata, Lhokseumawe, 24301, Aceh, Indonesia