Pembuatan Bahan Bakar Padat Biomassa Dari Limbah Sampah Organik Dengan Teknologi Biodrying

Muhammad Kautsar

Sari


The increasing population causes the amount of waste and energy consumption to increase. A recovery concept is needed that can utilize the energy contained in waste into alternative energy, namely biodrying. Biodrying is a waste processing method that utilizes the activity of microorganisms in decomposing organic material. Densification and innovation were carried out to make storage and transportation easier by making solid biomass fuel pellets with an adhesive mixture. This research aims to determine the effect of biodrying residence time and arpus adhesive concentration on the quality of the solid biomass fuel produced, including several tests, namely ash content, water content, volatile content, and burning time based on SNI 8951-2020. The production of solid biomass fuel was carried out by varying the biodrying residence time of 7, 10, 14, 18, 21 days and the arpus adhesive concentration of 5, 10, 15, 20, 25%. The research results showed that the best and optimal product was obtained with a biodrying time of 18 days and an adhesive concentration of 10% with an ash content of 7.50%, a water content of 11.96%, a volatile content of 69.88% and a flash time of 25 minutes.


Kata Kunci


Biodrying, arpus, biomass, fuel, organic waste

Teks Lengkap:

PDF

Referensi


Purwono, P., Hadiwidodo, M., & Rezagama, A. (2016). Penerapan Teknologi Biodrying dalam Pengolahan Sampah High Water Content Menuju Zero Leachate. Jurnal Presipitasi: Media Komunikasi dan Pengembangan Teknik Lingkungan, 13(2), 75-80.

Santosa, S., & Soemarno, S. (2017). Peningkatan Nilai Kalor Produk Pada Produk Proses Bio-drying Sampah Organik. The Indonesian Green Technology Journal, 3(1), 29-38.

Fiki, A. C. S., Hadiwidodo, M., & Zaman, B.(2022). Teknologi Biodrying untuk Meningkatkan Nilai Kalor Sampah dan Proyeksinya sebagai Bahan Bakar Alternatif pada Tahun 2028. Jurnal Ilmu Lingkungan, 20(1), 139-146.

Hardhianti, C., Sudarno, S., & Purwono, P. (2018). Pengaruh Aerasi Terhadap Karakteristik Lindi Hasil Pengolahan Sampah Sayuran dengan Metode Biodrying (Studi Kasus: Sawi Putih) (Doctoral dissertation, Diponegoro University).

Benjamin, A., & Suwandi, S. (2021). Analisis Pengaruh Penambahan Bahan Aditif Pada Briket Limbah Organik Terhadap Nilai Kalor. Proceedings of Engineering, 8(2).

Yuliah, Y., Suryaningsih, S., & Ulfi, K. (2017). Penentuan Kadar Air Hilang dan Volatile Matter Pada Bio-Briket dari Campuran Arang Sekam Padi dan Batok Kelapa. JIIF (Jurnal Ilmu dan Inovasi Fisika), 1(1), 51-57.

Aziz, M. R., Siregar, A. L., Rantawi, A. B., & Rahardja, I. B. (2019).Pengaruh Jenis Perekat Pada Biomassa Cangkang Kelapa Sawit Terhadap Waktu Bakar. Prosiding Semnastek.

Sukowati, D., Yuwono, T. A., & Nurhayati, A. D. (2019). Analisis Perbandingan Kualitas Biomassa Arang Bonggol Jagung dengan Arang Daun Jati. PENDIPA Journal of Science Education, 3(3), 142-145.

Rantawi, A. B., Siregar, A. L., & Rizkullah, A. (2021). Perbandingan Persentase Perekat Arpus 17, 5% dan 20% terhadap Kualitas Biomassa Cangkang Kelapa Sawit. Jurnal Citra Widya Edukasi, 13(3), 223-230.




DOI: http://dx.doi.org/10.30811/ristera.v3i2.7443

Refbacks

  • Saat ini tidak ada refbacks.


##submission.copyrightStatement##



Indexing :

ALAMAT KANTOR REDAKSI :
Jurusan Teknik Kimia Politeknik Negeri Lhokseumawe

Jalan Banda Aceh - Medan Km 280,3
Buketrata Po Box 90, Telp (0645) 42785 Fax (42785)
Email: [email protected]