Pengaruh Penggunaan Limbah Plastik HDPE dalam Campuran Aspal AC-BC sebagai Bahan Daur Ulang

Syaifuddin Din ST., MT, Kurniati Kurniati, Wulan Dahri

Abstract


The use of plastic waste as an additive in asphalt mixtures presents a promising solution to reduce environmental pollution while enhancing the performance of asphalt mixtures. This study aims to investigate the effect of adding High-Density Polyethylene (HDPE) plastic waste on the Marshall characteristics of Asphalt Concrete – Binder Course (AC-BC) mixtures. Post consumer recycled plastics are being considered for construction to address the threat of plastic waste materials and to improve sustainability. Asphalt pavement construction is highly considered for plastic waste materials recycling due to its large daily production [1]. The HDPE plastic waste used was sourced from household bottle and plastic bag waste, which was shredded and added to the asphalt mixture at variations of 0%, 2%, 4%, 6%, and 8% by asphalt weight. The Marshall method was employed to evaluate stability, flow, Marshall Quotient, Voids in the Mixture (VIM), Voids Filled with Bitument (VFB), and Voids in Mineral Aggregate (VMA). The results indicate that the addition of 6% HDPE yields the most optimal Marshall characteristics, with a stability value of 1367.36 kg, a flow of 3.28 mm, and a Marshall Quotient of 417.09 kg/mm. All parameters at this level met the Bina Marga 2018 specifications. Therefore, the appropriate addition of HDPE waste can significantly improve asphalt mixture quality while contributing to environmental sustainability.

Keywords


asphalt; concrete; HDPE; mixture; Marshall.

Full Text:

PDF

References


Ndun, K. D. P. N., Koreh, A. W., & Lamdu, A. K. A., 2024. Pengaruh penambahan cacahan limbah plastik HDPE (high density polyethylene) sebagai bahan tambah campuran laston AC-WC (asphalt concrete-wearing course) terhadap karakteristik marshall. AL-MIKRAJ Jurnal Studi Islam dan Humaniora (E-ISSN 2745-4584), Vol. 5, No. 01, pp. 367-378.

Latif, A.& Setiawan, A., 2023. Pengaruh penambahan plastik high density polyethylene (HDPE) dan low density polyethylene (LDPE) terhadap karakteristik campuran aspal ac-wc menggunakan metode kering. Sainteks, Vol. 20, No. 2, pp. 153-165.

Pinem, H. K. W. B., Pristyawati, T., & Safarizki, H. A., 2022. Analysis of the influence of additional plastic waste (hdpe) as mixed asphalt AC-WC on marshall parameters. ASTONJADRO, Vol. 11, No. 3, pp. 669-679.

Kariyana, I. M. et al., 2025. Evaluasi kinerja ruas jalan di kecamatan kuta utara. Jurnal Teknik Gradien, Vol. 17, No. 01, pp. 138-150.

Yendri, O.& Septiandi, W., 2023. Kajian kemampuan campuran aspal-beton (AC-BC) dengan asbuton cair yang diisi dengan serpihan HDPE (high density polyethylene). Jurnal Teknik Gradien, Vol. 15, No. 01, pp. 9-19.

Elnaml, I., Liu, J., Mohammad, L. N., Wasiuddin, N., Cooper III, S. B., & Cooper Jr, S. B., 2023. Developing sustainable asphalt mixtures using high-density polyethylene plastic waste material. Sustainability, Vol. 15, No. 13, p. 9897.

Nurfadila, T., Mustakim, M., & Fadly, I., 2024. Perbandingan kinerja marshall pada campuran aspal ac-wc menggunakan plastik polypropilene (PP) dan plastik high density polyethylene (HDPE). Sultra Civil Engineering Journal (SCiEJ), Vol. 5, No. 2, pp. 363-373.

Marlina, M., Wijayanti, D., Yudiastari, I. P., & Safitri, L., 2018. Pembuatan virgin coconut oil dari kelapa hibrida meiiiiiinggunakan metode penggaraman dengan NaCl dan garam dapur. Jurnal Chemurgy, Vol. 1, No. 2, pp. 7-12.

Pratama, R., 2024. Studi penggunaan bahan alternatif untuk pengurangan dampak lingkungan pada proyek konstruksi jalan tol. WriteBox, Vol. 1, No. 2.

Kurniasari, F. D., Pramanda, H., & Muarif, M. A., 2025. Pemanfaatan limbah plastik low density polyethylene (LDPE) sebagai substitusi terhadap campuran aspal pen 60/70. Teras Jurnal: Jurnal Teknik Sipil, Vol. 15, No. 1, pp. 49-60.

Shaffie, E., Ahmad, J., Arshad, A., & Kamarun, D., 2015. Empirical and rheological properties evaluation of modified asphalt binder containing nanopolyacrylate polymer

modifier. Jurnal Teknologi (Sciences & Engineering), Vol. 76, No. 9.

Suaryana, N., Susanto, I., Ronny, Y., & Sembayang, I. R., 2018. Evaluasi kinerja campuran beraspal dengan bitumen hasil ekstraksi penuh dari asbuton. Media Komunikasi Teknik Sipil, Vol. 24, No. 1, pp. 62-70.

Sumiati, S., Mahmuda, M. & Syapawi, A., 2019. Perkerasan aspal beton (AC-BC) limbah plastik HDPE yang tahan terhadap cuaca ekstrem. Construction and Material Journal, Vol. 1, No. 1, pp.1-11.

Eriyono, R.W. & Puspito, I.H., 2017. Pengaruh penambahan plastik high density poly ethylene pada lapisan perkerasan aspal beton AC-BC. Jurnal Infrastruktur, Vol. 3, No. 2, pp.115-126.

Nofriandi, I., Alamsyah, W. and Lydia, E.N., 2023. Studi penambahan variasi campuran plastik jenis HDPE pada campuran aspal penetrasi 60/70 untuk lapis aus AC-WC. Jurnal Teknik Sipil, Vol. 2, No. 2, pp.116-123.




DOI: http://dx.doi.org/10.30811/teknologi.v25i2.7040

Refbacks

  • There are currently no refbacks.


Copyright (c) 2025 Syaifuddin Din ST., MT

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

INDEXING AND ABSTRACTING BY:

Jurnal Teknologi - Politeknik Negeri Lhokseumawe is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License

©2021 All rights reserved | E-ISSN: 2550-0961; P-ISSN:1412-1476