Hide
Show all
A fuzzy-PID based control approach for precision volume filling in nitroglycerin production
Abstract
The production of nitroglycerin demands highly accurate liquid volume filling, as any deviation can significantly impact both product quality and safety. Peristaltic pumps are employed in this process due to their ability to deliver fluids with precision; however, maintaining volume accuracy amidst process variability remains a major challenge. This study aims to enhance volume-filling accuracy, improve system response, and increase energy efficiency in the nitroglycerin production process by implementing a Fuzzy-PID control system. The Fuzzy-PID method is applied to address uncertainties and dynamic variations inherent in peristaltic pump operations. The system's performance is evaluated in terms of accuracy, response characteristics, and energy consumption. Experimental results demonstrate that the use of Fuzzy-PID control achieves a volume-filling accuracy of up to 98%. This improvement contributes significantly to the efficiency and safety of nitroglycerin production, ensuring higher product quality and operational reliability.
Keywords
Full Text:
PDFReferences
S. K. Singh and R. Kumar, “Precision Control in Energetic Material Filling: A Safety Perspective,†Journal of Energetic Materials, vol. 40, no. 2, pp. 120–132, 2022.
M. F. Ali et al., “Design and Evaluation of Peristaltic Pump Performance for Chemical Processing,†Processes, vol. 10, no. 6, pp. 1045–1054, 2022.
Y. Zhang and H. Li, “Adaptive Fuzzy-PID Control for Nonlinear Process with Uncertainty,†IEEE Access, vol. 8, pp. 227544–227554, 2020.
J. Wang, Q. Chen, and L. Wu, “Improved Fuzzy PID Algorithm for Liquid Dispensing System,†Sensors, vol. 21, no. 11, p. 3809, 2021.
T. Nguyen et al., “Energy-Efficient Control of Peristaltic Pumps Using Optimized Fuzzy Logic,†Micromachines, vol. 14, no. 1, p. 64, 2023.
J. R. Asay and T. G. Engel, “Nitroglycerin and Its Applications: From Explosives to Medicine,†Chemical Reviews, vol. 122, no. 3, pp. 2043–2062, 2022.
M. N. Khan et al., “Review on Physical and Chemical Characteristics of Nitroglycerin for Energetic Material Applications,†Propellants, Explosives, Pyrotechnics, vol. 48, no. 1, pp. e202200145, 2023.
H. Lee and B. Park, “Advancements in Nitroester-Based Propellants,†Materials Today Communications, vol. 35, p. 105412, 2023.
C. S. Wong et al., “Pharmacological Mechanism and Clinical Use of Nitroglycerin in Cardiovascular Medicine,†Journal of Clinical Medicine, vol. 10, no. 4, p. 842, 2021.
L. M. Torres and D. H. Silva, “Safety and Process Control in Nitroester Manufacturing,†Process Safety and Environmental Protection, vol. 147, pp. 224–231, 2021.
A. Roy et al., “Handling and Metering of Energetic Liquids: Challenges and Innovations,†Journal of Hazardous Materials, vol. 403, p. 123872, 2021.
T. Zhang and M. Y. Lee, “Process Safety Analysis of Nitration-Based Explosive Manufacturing,†Process Safety and Environmental Protection, vol. 154, pp. 351–359, 2021.
K. Sharma et al., “Precision Dosing Systems in Energetic Materials Processing,†Chemical Engineering Journal, vol. 430, p. 133057, 2022.
J. P. Martin and L. R. Chen, “Quantitative Risk Assessment in Nitroester Production Lines,†Safety Science, vol. 134, p. 105080, 2021.
F. M. Diaz and R. Kumar, “Intelligent Control Systems for Explosive Liquid Dispensing,†IEEE Transactions on Industrial Informatics, vol. 18, no. 9, pp. 6173–6181, Sep. 2022.
Kamoer Fluid Tech Co., “NKP-DC-S10B Peristaltic Pump Datasheet,†Kamoer Official Website, 2021.
T. Wang and Y. Qian, “Review of Peristaltic Micro Pumps for Precise Fluid Control,†Micromachines, vol. 11, no. 12, p. 1050, 2020.
M. A. Khan et al., “Design and Optimization of Low-Flow Peristaltic Pumps for Laboratory Use,†Sensors and Actuators A: Physical, vol. 315, p. 112314, 2020.
D. Singh and A. Rathi, “Integration of Micro Peristaltic Pumps with Arduino for Controlled Dispensing,†Journal of Physics: Conference Series, vol. 1969, no. 1, p. 012048, 2021.
H. Zhang et al., “PWM-Based Speed Control of Low-Voltage Peristaltic Pumps for Microfluidic Applications,†IEEE Access, vol. 9, pp. 137815–137823, 2021.
A. G. Shankar and S. S. Panda, “Design and Analysis of Fuzzy PID Controller for Nonlinear Systems,†IEEE Access, vol. 9, pp. 76855–76864, 2021.
Y. Liu, J. Wang, and C. Zhang, “An Adaptive Fuzzy PID Controller Based on Rule Self-Tuning,†ISA Transactions, vol. 124, pp. 342–352, 2022.
M. H. Al-Swaid and K. K. Ang, “Comparative Study of Classical PID and Fuzzy-PID Controllers in Uncertain Environments,†International Journal of Fuzzy Systems, vol. 25, pp. 875–887, 2023.
Z. Chen et al., “Fuzzy Logic Based PID Tuning for Real-Time Control Systems,†Applied Sciences, vol. 11, no. 3, p. 1294, 2021.
T. Y. Nguyen and H. T. Le, “A Hybrid Fuzzy-PID Control Approach for Smart Fluid Dispensing Systems,†Micromachines, vol. 14, no. 1, p. 89, 2023.
T. R. Morgan et al., “Precision Dosing in Energetic Material Manufacturing: A Risk-Based Approach,†Process Safety and Environmental Protection, vol. 149, pp. 183–190, 2021.
H. Y. Lin and M. J. Yu, “Quantitative Control in Nitration Reactions for High-Energy Materials,†Journal of Energetic Materials, vol. 39, no. 4, pp. 341–354, 2021.
J. Zhao et al., “Thermal Safety Control in Glycerol Nitration Using Accurate Dosing Systems,†Chemical Engineering Journal, vol. 427, p. 131946, 2022.
F. P. Liu and Y. K. Tan, “Application of Capacitive Sensors in Volumetric Control of Reactive Fluids,†Sensors, vol. 20, no. 18, p. 5284, 2020.
L. H. Romero and D. I. Salazar, “Safety Hazards from Volume Deviation in Nitroester Manufacturing,†Journal of Loss Prevention in the Process Industries, vol. 68, p. 104309, 2020.
DOI: http://dx.doi.org/10.30811/jpl.v23i4.7346
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional .
Alamat Surat :
Politeknik Negeri LhokseumaweJl. Banda Aceh-Medan Km 280
Buketrata, Lhokseumawe, 24301, Aceh, Indonesia