Hide
Show all
Mechanical and microstructural effects of varying welding currents in GTAW of 7075-T62 aluminum
Abstract
Aircraft structures require diverse joining techniques, including riveting, bolting, bonding, and welding. While welding is less common in aerospace manufacturing due to concerns about the thermal sensitivity of aluminum alloys, it offers potential advantages such as weight reduction and the elimination of mechanical fasteners. This study investigates the effect of welding current on the microstructure and mechanical properties of 7075-T62 aluminum alloy welded using Gas Tungsten Arc Welding (GTAW) with ER 4043 filler metal. Welding currents of 40 A, 50 A, and 60 A were examined to assess their influence on tensile strength, hardness, and weld integrity. Results indicate that 50 A produces the highest tensile strength (34.297 kgf/mm²) and hardness (74.8 HRB), whereas 40 A results in lower tensile strength (26.471 kgf/mm²) and hardness (71.7 HRB). At 60 A, excessive heat input leads to increased porosity and deeper penetration, causing microstructural defects. The findings underscore the importance of optimizing welding parameters to balance mechanical performance and minimize defects. This study provides insights that are particularly relevant to aerospace applications, where reliable and high-strength welded joints are critical.
Keywords
Full Text:
PDFReferences
M. Bhong et al., “Review of composite materials and applications,†Mater Today Proc, Oct. 2023, doi: 10.1016/j.matpr.2023.10.026.
S. Septianissa and A. Z. Chandrasari, “Corrosion Rate of ASTM A53 Steel in Seawater Influenced by Variation in Concentration of Mangifera Indica L. Peel Extract,†Journal of Applied Engineering and Technological Science (JAETS), vol. 6, no. 1, pp. 550–560, Dec. 2024, doi: 10.37385/jaets.v6i1.5182.
M. N. Collins, G. Ren, K. Young, S. Pina, R. L. Reis, and J. M. Oliveira, “Scaffold Fabrication Technologies and Structure/Function Properties in Bone Tissue Engineering,†Adv Funct Mater, vol. 31, no. 21, May 2021, doi: 10.1002/adfm.202010609.
J. Yang et al., “Laser techniques for dissimilar joining of aluminum alloys to steels: A critical review,†J Mater Process Technol, vol. 301, p. 117443, Mar. 2022, doi: 10.1016/j.jmatprotec.2021.117443.
R. P. Verma and M. Kumar Lila, “A short review on aluminium alloys and welding in structural applications,†Mater Today Proc, vol. 46, pp. 10687–10691, 2021, doi: 10.1016/j.matpr.2021.01.447.
E. Zio, “Prognostics and Health Management (PHM): Where are we and where do we (need to) go in theory and practice,†Reliab Eng Syst Saf, vol. 218, p. 108119, Feb. 2022, doi: 10.1016/j.ress.2021.108119.
J. Lauzuardy et al., “MICROSTRUCTURE CHARACTERISTICS OF Cr3C2-NiCr COATINGS DEPOSITED WITH THE HIGH-VELOCITY OXY-FUEL THERMAL-SPRAY TECHNIQUE,†Materiali in tehnologije, vol. 58, no. 2, Apr. 2024, doi: 10.17222/mit.2023.869.
J. Yang, Z. Zhu, S. Han, Y. Gu, Z. Zhu, and H. Zhang, “Evolution, limitations, advantages, and future challenges of magnesium alloys as materials for aerospace applications,†J Alloys Compd, vol. 1008, p. 176707, Dec. 2024, doi: 10.1016/j.jallcom.2024.176707.
D. Varshney and K. Kumar, “Application and use of different aluminium alloys with respect to workability, strength and welding parameter optimization,†Ain Shams Engineering Journal, vol. 12, no. 1, pp. 1143–1152, Mar. 2021, doi: 10.1016/j.asej.2020.05.013.
S. Septianissa, K. W. Widantha, and M. Waldi, “INVESTIGATION OF TEMPERATURES AND HOLDING TIMES ON HIGH-STRENGTH LOW-ALLOY STEEL FOR TANK TRACK LINKS,†LOGIC : Jurnal Rancang Bangun dan Teknologi, vol. 24, no. 2, pp. 87–92, Jul. 2024, doi: 10.31940/logic.v24i2.87-92.
S. B. Nagaraju, H. C. Priya, Y. G. T. Girijappa, and M. Puttegowda, “Lightweight and sustainable materials for aerospace applications,†in Lightweight and Sustainable Composite Materials, Elsevier, 2023, pp. 157–178. doi: 10.1016/B978-0-323-95189-0.00007-X.
S. Septianissa, B. Prawara, E. A. Basuki, E. Martides, and E. Riyanto, “Improving the hot corrosion resistance of γ/γ’ in Fe-Ni superalloy coated with Cr3C2-20NiCr and NiCrAlY using HVOF thermal spray coating,†Int J Electrochem Sci, vol. 17, no. 12, p. 221231, Dec. 2022, doi: 10.20964/2022.12.27.
B. Derbiszewski, A. Obraniak, A. Rylski, K. Siczek, and M. Wozniak, “Studies on the Quality of Joints and Phenomena Therein for Welded Automotive Components Made of Aluminum Alloy—A Review,†Coatings, vol. 14, no. 5, p. 601, May 2024, doi: 10.3390/coatings14050601.
J. A. Österreicher et al., “Dissimilar friction stir welding and post-weld heat treatment of Ti-6Al-4V and AA7075 producing joints of unprecedented strength,†Journal of Advanced Joining Processes, vol. 9, p. 100213, Jun. 2024, doi: 10.1016/j.jajp.2024.100213.
K. Aglawe, S. Giri, M. Dhande, and S. Shelare, “Application of aluminum alloys in aviation industry: A review,†2023, p. 020064. doi: 10.1063/5.0163002.
F. Li et al., “Wetting behavior of melt and its effect on lack of fusion in arc oscillating NG-GTAW,†J Mater Process Technol, vol. 296, p. 117176, Oct. 2021, doi: 10.1016/j.jmatprotec.2021.117176.
A. Karpagaraj, K. Parthiban, and S. Ponmani, “Optimization techniques used in gas tungsten arc welding process – A review,†Mater Today Proc, vol. 27, pp. 2187–2190, 2020, doi: 10.1016/j.matpr.2019.09.093.
D. Wang, C. Hua, and H. Lu, “Numerical analysis of ultrasonic waves in the gas tungsten arc welding (GTAW) with ultrasonic excitation of current,†Int J Heat Mass Transf, vol. 158, p. 119847, Sep. 2020, doi: 10.1016/j.ijheatmasstransfer.2020.119847.
Y. Cheng, R. Yu, Q. Zhou, H. Chen, W. Yuan, and Y. Zhang, “Real-time sensing of gas metal arc welding process – A literature review and analysis,†J Manuf Process, vol. 70, pp. 452–469, Oct. 2021, doi: 10.1016/j.jmapro.2021.08.058.
Y. M. Zhang, Y.-P. Yang, W. Zhang, and S.-J. Na, “Advanced Welding Manufacturing: A Brief Analysis and Review of Challenges and Solutions,†J Manuf Sci Eng, vol. 142, no. 11, Nov. 2020, doi: 10.1115/1.4047947.
E. J. Barrick and J. N. DuPont, “Microstructural characterization and toughness evaluation of 10 wt% Ni steel weld metal gas tungsten arc and gas metal arc weld fusion zones,†Materials Science and Engineering: A, vol. 796, p. 140043, Oct. 2020, doi: 10.1016/j.msea.2020.140043.
L. Yongbing, “Pressure Welding,†in The ECPH Encyclopedia of Mining and Metallurgy, Singapore: Springer Nature Singapore, 2024, pp. 1685–1686. doi: 10.1007/978-981-99-2086-0_1383.
S. Chauhan and A. Narasimhulu, “Comprehensive Study on Wire Arc Additive Manufacturing (WAAM),†2024, pp. 281–305. doi: 10.1007/978-981-99-5613-5_22.
S. Chauhan and A. Narasimhulu, “Comprehensive Study on Wire Arc Additive Manufacturing (WAAM),†2024, pp. 281–305. doi: 10.1007/978-981-99-5613-5_22.
R. Kosturek, J. Torzewski, M. Wachowski, and L. Śnieżek, “Effect of Welding Parameters on Mechanical Properties and Microstructure of Friction Stir Welded AA7075-T651 Aluminum Alloy Butt Joints,†Materials, vol. 15, no. 17, p. 5950, Aug. 2022, doi: 10.3390/ma15175950.
J. A. Speck, Mechanical Fastening, Joining, and Assembly. CRC Press, 2018. doi: 10.1201/9781351228640.
K. Jebabalan and M. S. Dennison, “Solid-State Welding of Aluminium Alloys,†2023, pp. 105–122. doi: 10.1007/978-981-19-7146-4_6.
V. P. Singh, A. Kumar, D. Kumar, and B. Kuriachen, “Effect of welding speed on microstructure, nano-mechanical and nano-tribological characteristics of dissimilar friction stir welded AA6061-T6 and AZ31 alloy,†J Adhes Sci Technol, vol. 38, no. 13, pp. 2295–2317, Jul. 2024, doi: 10.1080/01694243.2024.2302268.
W. J. Jensen, “Failures of Mechanical Fasteners[1],†in Failure Analysis and Prevention, ASM International, 2002. doi: 10.31399/asm.hb.v11.a0001812.
P. N. Bellamkonda, M. Dwivedy, and R. Addanki, “Cold metal transfer technology - A review of recent research developments,†Results in Engineering, vol. 23, p. 102423, Sep. 2024, doi: 10.1016/j.rineng.2024.102423.
A. H. Baghdadi, Z. Sajuri, M. Z. Omar, and A. Rajabi, “Friction Stir Welding Parameters: Impact of Abnormal Grain Growth during Post-Weld Heat Treatment on Mechanical Properties of Al–Mg–Si Welded Joints,†Metals (Basel), vol. 10, no. 12, p. 1607, Nov. 2020, doi: 10.3390/met10121607.
B. Derbiszewski, A. Obraniak, A. Rylski, K. Siczek, and M. Wozniak, “Studies on the Quality of Joints and Phenomena Therein for Welded Automotive Components Made of Aluminum Alloy—A Review,†Coatings, vol. 14, no. 5, p. 601, May 2024, doi: 10.3390/coatings14050601.
T. Majeed, Y. Mehta, and A. N. Siddiquee, “Precipitation-dependent corrosion analysis of heat treatable aluminum alloys via friction stir welding, a review,†Proc Inst Mech Eng C J Mech Eng Sci, vol. 235, no. 24, pp. 7600–7626, Dec. 2021, doi: 10.1177/09544062211003609.
B. Derbiszewski, A. Obraniak, A. Rylski, K. Siczek, and M. Wozniak, “Studies on Quality of Joints and Phenomena Therein for Welded Vehicle Components Made of Aluminium Alloy – a Review,†Mar. 25, 2024. doi: 10.20944/preprints202403.1458.v1.
DOI: http://dx.doi.org/10.30811/jpl.v23i1.6060
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional .
Alamat Surat :
Politeknik Negeri LhokseumaweJl. Banda Aceh-Medan Km 280
Buketrata, Lhokseumawe, 24301, Aceh, Indonesia