A quad-cliff mechanism for eco-printing by pounding technique: design, manufacturing, and testing

Farid Triawan; Arya Smara Dyota; Fatima Tasya Kamila; Kushendarsyah Saptaji; Nikolas Krisma Hadi Fernandez; Arridina Susan Silitonga; Abdi Hanra Sebayang

doi:10.30811/jpl.v22i5.5738

A quad-cliff mechanism for eco-printing by pounding technique: design, manufacturing, and testing

Farid Triawan, Arya Smara Dyota, Fatima Tasya Kamila, Kushendarsyah Saptaji, Nikolas Krisma Hadi Fernandez, Arridina Susan Silitonga, Abdi Hanra Sebayang

Abstract

Indonesia produces many types of textile products, such as clothing and custom fabrics often with unique patterns. To generate the patterns, there are many methods, including eco-printing by pounding process. However, the process, which was later referred to as eco-pounding, requires much time and energy, which can have a negative impact, such as musculoskeletal disorders, on the human body. To address this issue, the present work proposes a machine that can help the process of eco-pounding. Shigley’s method is applied to guide the design process of the machine. The design and manufacturing processes of the eco-pounding machine are presented, in which three machine design models are first introduced and then analyzed for finalization by benchmarking method. Subsequently, a machine model that uses a so-called quad-cliff mechanism is selected for manufacturing and testing. As a result, the proposed machine can achieve the design requirements that were set. Three pounding movements per second can be obtained by the machine, with possible increases by an engine upgrade. This machine can be considered a prototype for a semi-automatic eco-printing process by pounding technique.

Keywords

eco-printing machine; pounding technique; quad cliff mechanism

Full Text:

PDF

References

Arc Group, “Textile & Clothing Manufacturing in Indonesia.” Accessed: May 30, 2023.[Online]. Available: https://arc-group.com/indonesia-textile-clothing-manufacturing/

F. Arania, I. M. Putri, and M. Saifuddin, “The Impact of Covid-19 on Textile and Fashion Industries: The Economic Perspective,” Journal of Marketing Innovation (JMI), vol. 2, no. 1, Mar. 2022, doi: 10.35313/jmi.v2i1.18.

EmanSulaimanet al., “Go Green Products Using Ecoprint Techniques,” Indonesian Journal of Community Services Cel, vol. 1, no. 1, pp. 56–62, Jun. 2022, doi: https://doi.org/10.33292/ijcsc.v1i1.8.

Z. B. Nugrohoet al., “Preliminary Development of Indicators for Assessing the Sustainability of Indonesia’s Natural-Dye-Based Batik Industry,” International Journal of Sustainable Development and Planning, vol. 17, no. 7, pp. 2097–2107, Nov. 2022, doi: 10.18280/ijsdp.170710.

N. Kusumawati, E. Rahmadyanti, and M. M. Sianita, “Batik became two sides of blade for the sustainable development in Indonesia,” in Green Chemistry and Water Remediation: Research and Applications, Elsevier, 2021, pp. 59–97. doi: 10.1016/B978-0-12-817742-6.00003-7.

W. M. Kifti, E. Rahayu, and R. Risnawati, “Menerapkan Eco Print DalamMembuat Batik Ramah LingkunganOlehIbu-Ibu DWP Dinas PUPR KabAsahan,” Jurdimas (JurnalPengabdianKepadaMasyarakat) Royal, vol. 5, no. 1, pp. 67–72, Jan. 2022, doi: 10.33330/jurdimas.v5i1.1420.

Putri Lestari and AsriWibawaSakti, “Application of Alum Fixator for Eco Print Batik Making Using a Pounding Technique in Fine Arts Learning in Junior High School,” ASEAN Journal of Science and Engineering, vol. 2, no. 2, pp. 167–172, 2022, doi: https://doi.org/10.17509/ajse.v2i2.38676.

Kapasari, “3 Kinds of Eco Printing Techniques.” Accessed: Feb. 10, 2023.[Online]. Available: https://kapasari.com/3-kinds-of-eco-printing-techniques

Barb, “Compare Basic Eco Printing Methods,” Made by Barb. Accessed: May 30, 2023.[Online]. Available: https://www.madebybarb.com/2022/10/01/compare-basic-eco-printing-methods/

H. D. Waluyanto, L. Natadjaja, and A. Wijayanti, “Exploration of Eco-Print Products Through Participatory Rural Appraisal and Service-Learning Method in Blitar Regency,” SSRN Electronic Journal, 2020, doi: 10.2139/ssrn.3807698.

S. E. Wahyuningsih, A. Kusumastuti, M. Krisnawati, O. Paramita, M. Yuniar, and M. R. Furi, “Quality of motif, colors and fastness of SekarAyuecoprint products in terms of mordant type, natural dyes, and types of leaves on silk fabrics,” IOP ConfSer Earth Environ Sci, vol. 969, no. 1, p. 012043, Jan. 2022, doi: 10.1088/1755-1315/969/1/012043.

S. Nurmasitah, R. Solikhah, Widowati, and A. S. Milannisa, “The impact of different types of mordant on the eco-print dyeing using tingi (Ceriopstagal),” IOP ConfSer Earth Environ Sci, vol. 969, no. 1, p. 012046, Jan. 2022, doi: 10.1088/1755-1315/969/1/012046.

S. Bureekhampun and C. Maneepun, “Eco-Friendly and Community Sustainable Textile Fabric Dyeing Methods From Thai Buffalo Manure: From Pasture to Fashion Designer,” Sage Open, vol. 11, no. 4, p. 215824402110582, Oct. 2021, doi: 10.1177/21582440211058201.

R. RheizkhiraReflin, S. Henderson Chang, K. Saptaji, and F. Triawan, “Mechanical Design and Analysis of Eco-Print Textile Pounding Machine,” ASEAN Journal for Science and Engineering in Materials, vol. 2, no. 2, pp. 143–158, 2023, [Online]. Available: https://ejournal.bumipublikasinusantara.id/index.php/ajsem

T. Anandaraj, S. Nishanth, S. Sakthivelu, and K. Senthilraj, “Work-Related Musculoskeletal Disorders among Hammering Workers,” Journal of Chemical and Pharmaceutical Sciences, pp. 14–17, Feb. 2017, [Online]. Available: https://jchps.com/specialissues/2017%20Special%20Issue%203/MKCE_MECH%204.pdf

IneKusumaAryani, R. BenyWijanarko, and RistianaDyahPurwandari, “Teknik Eco Print Ramah LingkunganBerbasisEkonomis KreatifDalamUpayaMenciptakan SDM MasyarakatMandiri PascaPandemi COVID 19 UntukAnggotaPimpinan Ranting Aisyiyah (PRA) DesaKarangCegakKecamatanSumbang KabupatenBanyumas ,” JurnalPengabdianMasyarakat, vol. 3, no. 1, pp. 1–16, May 2022.

B. Harsanto, I. Primiana, V. Sarasi, and Y. Satyakti, “Sustainability Innovation in the Textile Industry: A Systematic Review,” Sustainability, vol. 15, no. 2, p. 1549, Jan. 2023, doi: 10.3390/su15021549.

L. Natadjaja, H. D. Waluyanto, and A. Wijayanti, “TRAINING ON MAKING ECO-PRINT MOTIFS FOR COMMUNITY EMPOWERMENT IN BLITAR REGENCY,” JurnalSosioteknologi, vol. 20, no. 1, pp. 80–90, Apr. 2021, doi: 10.5614/sostek.itbj.2021.20.1.8.

C. Coombs, D. Hislop, S. K. Taneva, and S. Barnard, “The strategic impacts of Intelligent Automation for knowledge and service work: An interdisciplinary review,” The Journal of Strategic Information Systems, vol. 29, no. 4, p. 101600, Dec. 2020, doi: 10.1016/j.jsis.2020.101600.

Richard G. Budynas and J. Keith Nisbett, Shigley’s Mechanical Engineering Design, 11th Edition. McGraw-Hill Education, 2020.

N. Khoiriyah, S. A. Alfatih, M. Munir, and F. Triawan, “Component Design and Strength Analysis of Coffin Lowering Machine for COVID-19 Corpse: A Problem-Based Learning,” Indonesian Journal of Multidiciplinary Research, vol. 1, no. 1, pp. 137–150, Apr. 2021, doi: 10.17509/ijomr.v1i1.33888.

K. Saptaji, F. Triawan, T. K. Sai, and A. Gebremariam, “Deburring Method of Aluminum Mould Produced by Milling Process for Microfluidic Device Fabrication,” Indonesian Journal of Science and Technology, vol. 6, no. 1, pp. 123–140, Jan. 2021, doi: 10.17509/ijost.v6i1.31852.

Chris Adams, “What is Pugh Matrix?,” Modern Analyst. Accessed: May 31, 2023.[Online]. Available: https://www.modernanalyst.com/Careers/InterviewQuestions/tabid/128/ID/2159/What-is-a-Pugh-Matrix.aspx

K. Konrad, M. Sommer, and I. Shareef, “Crate consolidation and standardization using lean manufacturing systems,” ManufLett, vol. 35, pp. 1264–1275, Aug. 2023, doi: 10.1016/j.mfglet.2023.08.105.

B. Hadisujoto and R. Wijaya, “Development and Accuracy Test of a Fused Deposition Modeling (FDM) 3D Printing using H-Bot Mechanism,” Indonesian Journal of Computing, Engineering and Design (IJoCED), vol. 3, no. 1, pp. 46–53, Apr. 2021, doi: 10.35806/ijoced.v3i1.148.

G. Kimbell and M. A. Azad, “3D printing: Bioinspired materials for drug delivery,” in Bioinspired and Biomimetic Materials for Drug Delivery, Elsevier, 2021, pp. 295–318. doi: 10.1016/B978-0-12-821352-0.00011-3.

R. B. Kristiawan, F. Imaduddin, D. Ariawan, Ubaidillah, and Z. Arifin, “A review on the fused deposition modeling (FDM) 3D printing: Filament processing, materials, and printing parameters,” Open Engineering, vol. 11, no. 1, pp. 639–649, Apr. 2021, doi: 10.1515/eng-2021-0063.

DwiRetno, SitiNurrohmah, and Sri EndahWahyuningsih, “StudiKenyamanan Sepatu KainBlacu,” FASHION AND FASHION EDUCATION JOURNAL, vol. 11, no. 2, pp. 61–68, 2022.

ArchitaWulandari, TerbitSetyaPambudi, and HanifAzhar, “UPCYCLING LIMBAH KAIN PRODUKSI SEPATU MENJADI TAS SEBAGAI PRODUK MERCHANDISE,” e-Proceeding of Art & Design, vol. 9, no. 1, pp. 643–657, Feb. 2022.

C. Nuraeni and D. Widiawati, “Utilization of Blacu Fabric Material Waste as an Alternative Material for Fast Fashion Products,” EdunityKajianIlmuSosialdanPendidikan, vol. 2, no. 12, pp. 1560–1570, Dec. 2023, doi: 10.57096/edunity.v2i12.207.

WardatulFirdausArif and Marsudi, “UJI COBA WARNA DAUN SIRIH MERAH DENGAN TEKNIK POUNDING DAN STEAM ,” JurnalSeniRupa, vol. 7, no. 2, pp. 73–80, Jul. 2019.

Putri Lestari and AsriWibawaSakti, “Application of Alum Fixator for Eco Print Batik Making Using a Pounding Technique in Fine Arts Learning in Junior High School ,” ASEAN Journal of Science and Engineering, vol. 2, no. 2, pp. 167–172, Feb. 2024.

YeyenFatmala and Sri Hartati, “PengaruhMembatikEcoprintterhadapPerkembanganKreativitasSeniAnak di Taman Kanak-Kanak ,” JurnalPendidikanTambusai, vol. 4, no. 2, pp. 1143–1155, Aug. 2020.

DOI: http://dx.doi.org/10.30811/jpl.v22i5.5738