Selection of drive system and chassis structure basic design and analysis for medium-sized urban electric bus

Naufal Aflah Hibatullah, Rachman Setiawan

Abstract


One of the alternative solutions to address environmental and energy challenges is the utilization of electric vehicles, particularly in the domain of public transportation. The focus was on the development of medium-sized electric buses to expand the reach of electric-powered public transport. The design process encompasses the selection of vehicle components, such as the drive system, and the configuration of a space frame chassis structure. The drive system was meticulously chosen and proved to exceed the design requirements, as it achieved a gradability of 12.44%, surpassing the targeted capability of 10% slope. Moreover, it boasts a maximum speed of 108 km/h, exceeding the design requirement of a maximum speed of 50 km/h, and can accelerate at a rate of 1-2 m/s². The chassis design adheres to regulations and standards and is grounded in the strength, stiffness, and natural frequency criteria. The initial chassis design did not meet the design requirement, however, through several iterations, a chassis structure was achieved with a vertical bending stiffness of 8.57 kN/mm and a torsional stiffness of 9.63 kNm/°. Based on the outcomes of this research, a drive system and chassis structure design that fully satisfies all the existing design requirements has been successfully attained.

Keywords


Medium-sized electric bus, urban application, design process, drive system, chassis structure.

Full Text:

PDF

References


P. Adhiguna. "Electrifying Indonesia’s Road Transport." Institute for Energy Economics and Financial Analysis. https://ieefa.org/media/3603/download?attachment (accessed 14-12-2023, 2023).

C. Sudjoko, N. Sasongko, I. Utami, and A. Maghfuri, "Utilization of electric vehicles as an energy alternative to reduce carbon emissions," in IOP Conference Series: Earth and Environmental Science, 2021, vol. 926, no. 1: IOP Publishing, p. 012094, doi: https://doi.org/10.1088/1755-1315/926/1/012094.

Y. Noorollahi, A. Aligholian, and A. Golshanfard, "Stochastic energy modeling with consideration of electrical vehicles and renewable energy resources-A review," Journal of energy management and technology, vol. 4, no. 1, pp. 13-26, 2020, doi: https://doi.org/10.22109/JEMT.2019.174242.1162.

D. Karina. "TransJakarta Operasikan 52 Bus Listrik, Ini Rute-rute yang Dilewati." (in Indonesian language) Kompas.tv. https://www.kompas.tv/regional/437515/transjakarta-operasikan-52-bus-listrik-ini-rute-rute-yang-dilewati?page=all (accessed 12-11-2023, 2023).

I. Hidayati, "Daily Commute of Circular Migrant in Greater Jakarta: a Review: A REVIEW," DEMOS: Journal of Demography, Ethnography and Social Transformation, vol. 1, no. 1, pp. 14-23, 2021, doi: https://doi.org/10.30631/demos.v1i1.998.

A. R. Babu, B. Sairaju, S. Amirishetty, and D. Deepak, "Automotive chassis design material selection for road and race vehicles," Journal of Mechanical Engineering Research and Developments, vol. 43, no. 3, pp. 274-282, 2020.

K. G. Alifio, J. B. Ariatedja, and B. Sudarmanta, "Analisis Material Ringan pada Bus Body Frame Battery Electric Vehicle Bus PUI SKO ITS dengan Metode Elemen Hingga," Jurnal Teknik ITS, vol. 10, no. 2, pp. E311-E318, 2021, doi: https://doi.org/10.12962/j23373539.v10i2.74306.

O. Arteaga et al., "Design and structural analysis of an interprovincial bus applying the LFRD method," Materials Today: Proceedings, vol. 27, pp. 352-358, 2020, doi: https://doi.org/10.1016/j.matpr.2019.11.114.

O. Kurdi et al., "Analisa Statik dan Optimasi Size Chassis Bus Medium dengan Metode Elemen Hingga," (in Indonesian language) ROTASI, vol. 22, no. 4, pp. 272-281, 2020, doi: https://doi.org/10.14710/rotasi.22.4.272-281.

B. Y. Wahyudi, B. Sudarmanata, and J. B. Ariatedja, "Analisa Torsional Rigidity dan Bending Stiffness pada Bus Elektrik PUI-SKO ITS Konversi ICE ke BEV dengan Variasi Cross Member," (in Indonesian language) Jurnal Teknik ITS, vol. 10, no. 2, pp. E303-E310, 2021, doi: https://doi.org/10.12962/j23373539.v10i2.74299.

S. Wicaksono, M. Rahman, S. Mihradi, and S. Prifiharni, "Finite element analysis of bus rollover test in accordance with UN ECE R66 Standard," 2017, doi: https://doi.org/10.5614/j.eng.technol.sci.2017.49.6.7.

Ministry of Transportation. (2019). Ministerial Regulation of Ministry of Transportation of the Republic Indonesia number 15 of 2019 on Organizing the Transportation of People by Public Motorized Vehicles on Routes.

Ministry of Public Works and Public Housing. (2018). 02/SE/M/2018, Perencanaan Teknis Fasilitas Pejalan Kaki.

Ministry of Transportation. (2015). Ministerial Regulation of Ministry of Transportation of the Republic Indonesia number 111 of 2015 on Procedures for Determining Speed Limits.

Ministry of Public Works and Public Housing. (2021). 20/SE/Db/2021, Pedoman desain geometrik jalan.

X. Karekla, K. Gkiotsalitis, and N. Tyler, "The impact of a passenger-safety-driven acceleration limit on the operation of a bus service," Accident analysis & prevention, vol. 148, p. 105790, 2020, doi: https://doi.org/10.1016/j.aap.2020.105790.

G. Genta and L. Morello, The automotive chassis. Springer, 2009.

B. Cheung and A. Nakashima, "A review on the effects of frequency of oscillation on motion sickness," Defence R&D Canada Toronto Technical Report, pp. 10-11, 2006.

M. Ehsani, Y. Gao, S. Longo, and K. M. Ebrahimi, Modern electric, hybrid electric, and fuel cell vehicles. CRC press, 2018.

BMZ GROUP. "Magnus+ Latest Generation of the Commercial E-Mobility Battery." BMZ GROUP. https://bmz-group.com/images/Magnus_E-Mobility_Battery.pdf (accessed 24-09-2023, 2023).

K. Dambrauskas, J. Vanagas, T. Zimnickas, A. Kalvaitis, and M. Ažubalis, "A method for efficiency determination of permanent magnet synchronous motor," Energies, vol. 13, no. 4, p. 1004, 2020, doi: https://doi.org/10.3390/en13041004.

VSE. "VSE ELECTRONIC BUS STEERING." VSE. https://www.v-s-e.com/bussen/vse-electronic-bus-steering (accessed 2023).

S. Prasetya, M. Adhitya, H. D. Budiono, and D. A. Sumarsono, "A investigation of braking system actuators for electric shuttle bus," in E3S Web of Conferences, 2018, vol. 67: EDP Sciences, p. 01023, doi: https://doi.org/10.1051/e3sconf/20186701023.

A. Y. Dwinanto and F. B. Muhammad, "Analisa Perbandingan Karakteristik Bodi dan Chassis pada Prototype Kendaraan Listrik," (in Indonesian language) Jurnal Rekayasa Mesin, vol. 6, no. 2, pp. 101-105, 2015, doi: https://doi.org/10.21776/ub.jrm.2015.006.02.2.

Indonesian government. (2012). Government Regulation of Indonesia number 55 of 2012 on Vehicle.

INSTITUTO ECUATORIANO DE NORMALIZACIÓN, "NTE INEN 1323: 2009," Veículos automotivos, carrocerias de ônibus. Requisitos” Quito, Equador: Instituto Equatoriano de Normalização, pp. 2-8, 2009.

Ministry of Transportation. (2015). Ministerial Regulation of Ministry of Transportation of the Republic Indonesia number 175 of 2015 on Standard Technical Specifications for Normal Speed Trains with Self Propulsion. [Online] Available: https://peraturan.bpk.go.id/Home/Details/103608/permenhub-no-175-tahun-2015

W. Afzal and R. A. Mufti, "Optimal cross-section of cross member for increased torsional and bending stiffness of ladder frame chassis," in 2019 16th International Bhurban Conference on Applied Sciences and Technology (IBCAST), 2019: IEEE, pp. 218-228, doi: https://doi.org/10.1109/IBCAST.2019.8667195.

A. K. Ary et al., "Numerical estimation of the torsional stiffness characteristics on urban Shell Eco-Marathon (SEM) vehicle design," Curved and Layered Structures, vol. 8, no. 1, pp. 167-180, 2021, doi: https://doi.org/10.1515/cls-2021-0016




DOI: http://dx.doi.org/10.30811/jpl.v22i4.4905

Refbacks

  • There are currently no refbacks.




Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 

  

    

    

Lisensi Creative Commons

Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional.

 

Mailing Address:

Politeknik Negeri Lhokseumawe

Jl. Banda Aceh-Medan
Km. 280,3, Buketrata, Mesjid Punteut, Blang Mangat,
Kota Lhokseumawe, 24301

Propinsi Aceh,
Indonesia