Dove Tail Interlocking Tensile Stress Analysis Comparison of ABS and PLA Material in Solid Works Simulation

Bertha Bintari Wahyujati; Felix Krisna Aji

doi:10.30811/jpl.v21i1.3286

Dove Tail Interlocking Tensile Stress Analysis Comparison of ABS and PLA Material in Solid Works Simulation

Bertha Bintari Wahyujati, Felix Krisna Aji

Abstract

The Tensile Test Method on PLA material for product printing using a 3D printer will recommend the dove tail design as an interlocking part. The result of the design of the dove tail type as an interlocking join part is tested for the most optimal tensile strength. In this paper, consideration for the dove tail design used in material testing and will be printed using a 3D printer is in terms of technical ease of printing and technical testing of its physical form so that it can be gripped using a tensile test tool such as the Universal Tensile Machine (UTM). The dove tail design is designed with a scale representative size that meets the requirements of the standard clamp size of the test tool. Tensile force testing simulation using SolidWorks software will be used as a pre-tensile test analysis before being implemented by UTM. The results obtained are the deformation that is occurring, such as the PLA material having a higher deflection of 7,567 mm and the ABS material having a deflection of 1,897 mm. The strain on interlocking is 0.1081 for ABS material and 0.3988 for PLA material.

Keywords

PLA, ABS, tensile test, interlocking, simulation

Full Text:

PDF

References

P. Song, Z. Fu, L. Liu, and C. W. Fu, “Printing 3D objects with interlocking parts,” Comput. Aided Geom. Des., vol. 35–36, pp. 137–148, May 2015,

DOI: 10.1016/j.cagd.2015.03.020.

L. N. Ikhsanto and Zainuddin, “Analisa Kekuatan Bending Filamen Abs Dan Pla Pada Hasil 3d Printer Dengan Variasi Suhu Nozzle,” Media Mesin J. Imiah Tek. Mesin Vol., vol. 21, no. 1, pp. 9–17, 2020, DOI: 10.23917/mesin.v21i1.9418.

V. Ermolai et al., “Mechanical Behaviour of Macroscopic Interfaces for 3D Printed Multi-material Samples,” MATEC Web Conf., vol. 368, p. 01004, 2022, DOI: 10.1051/matecconf/202236801004.

K. ÖZSOY, A. ERÇETİN, and Z. A. ÇEVİK, “Comparison of Mechanical Properties of PLA and ABS Based Structures Produced by Fused Deposition Modelling Additive Manufacturing,” Eur. J. Sci. Technol., no. 27, pp. 802–809, 2021, DOI: 10.31590/ejosat.983317.

W. H. Pratama, H. -, and H. -, “Optimasi Parameter Proses 3D Printing Terhadap Kuat Tarik Material Filamen PLA + Menggunakan Metode Taguchi,” Sprocket J. Mech. Eng., vol. 3, no. 1, pp. 39–45, 2021, DOI: 10.36655/sprocket.v3i1.568.

Sobron Lubis and D. Sutanto, “Pengaturan Orientasi Posisi Objek pada Proses Rapid Prototyping Menggunakan 3D Printer Terhadap Waktu Proses dan Kwalitas Produk,” J. Tek. Mesin, vol. 15, no. 1, pp. 27–34, 2014, DOI: 10.9744/jtm.15.1.27-34.

L. Sobron and D. Sutanto, “Pengaruh Posisi Orientasi Objek Pada Proses Rapid Prototyping 3d Printing Terhadap Kekuatan Tarik Material Polymer,” SINERGI, vol. 20, no. 3, p. 229, Dec. 2016, DOI: 10.22441/sinergi.2016.3.009.

G. S. Lubis, M. Taufiqurrahman, and M. Ivanto, “Analisa Pengaruh Parameter Proses Terhadap Uji Tarik Produk Hasil 3D Printing Berbahan Polylatic Acid,” J. Engine Energi, Manufaktur, dan Mater., vol. 5, no. 2, p. 39, 2021, DOI: 10.30588/jeemm.v5i2.877.

S. Lubis, M. Taufiqurrahman, and M. Ivanto, “Analisa Pengaruh Parameter Proses Terhadap Uji Tarik Produk Hasil 3D Printing Berbahan Polylatic Acid (1)* Gita Suryani Lubis, (2) Muhammad Taufiqurrahman, (3) Muhammad Ivanto,” J. Engine Energi, manufaktur, dan Mater., vol. 5, no. 2, pp. 39–44, 2021. DOI: http://dx.doi.org/10.30588/jeemm.v5i2.877

A. Finali, A. Fauzi Hanafi, R. P. Eko, P. Studi Teknik Mesin, P. Negeri Banyuwangi, and P. Studi Teknik Manufaktur Kapal, “Analisis Variasi Pattern 3D Printing terhadap Kekuatan Tarik,” J-Proteksion, vol. 5, no. 1, pp. 16–19, 2020, [Online]. Available: http://jurnal.unmuhjember.ac.id/index.php/J-Proteksion DOI: https://doi.org/10.32528/jp.v5i1.4320

A. Zamheri, A. P. Syahputra, and F. Arifin, “Studi Penyusutan Pembuatan Gigi Palsu Dengan 3D Printing Fdm Pendekatan Metode Taguchi,” Jurnal Austenit Vol.12 No.2, Oktober 2020 DOI: https://doi.org/10.5281/zenodo.4547840

J. H. Panjaitan, M. Tampubolon, F. Sihombing, and J. Simanjuntak, “Pengaruh Kecepatan, Temperatur dan Infill Terhadap Kualitas dan Kekasaran Kotak Relay Lampu Sign Sepedamotor Hasil dari 3D Printing,” Sprocket J. Mech. Eng., vol. 2, no. 2, pp. 87–99, 2021, DOI: 10.36655/sproket.v2i2.530.

S. Sukmawati Shamin, “Perancangan Sistem Jointing Pada Pemanfaatan Limbah Cone Thread Design Of Jointing System On The Utilization Of Waste Cone Thread ( A Case Study in Jln Area , Intersection Holis, Bandung ),” 2016. https://repository.telkomuniversity.ac.id/pustaka/files/122011/jurnal_eproc/perancangan-sistem-jointing-pada-pemanfaatan-limbah-cone-thread.pdf

A. Zapciu, G. D. Tasca, and C. G. Amza, “Considerations on 3D printing joints parts,” IOP Conf. Ser. Mater. Sci. Eng., vol. 400, no. 2, 2018, DOI: 10.1088/1757-899X/400/2/022061.

L. C. S. Nunes, F. W. R. Dias, and H. S. Da Costa Mattos, “Mechanical behavior of polytetrafluoroethylene in tensile loading under different strain rates,” Polym. Test., vol. 30, no. 7, pp. 791–796, 2011, DOI: 10.1016/j.polymertesting.2011.07.004.

M. SOUISA, P.-A. Staf Jurusan Fisika Fakultas MIPA Universitas Pattimura Jl. Ir. M. Putuhena, Kampus Unpatti, “Analisis Modulus Elastisitas Dan Angka Poisson Bahan Dengan Uji Tarik (The Analysis of Modulus of Elasticity and Poisson Number using the Pull Test),” J. Barekeng Vol. 5 No. 2 Hal. 9 – 14 Anal., vol. 5, no. 2, pp. 9–14, 2011. DOI: https://doi.org/10.30598/barekengvol5iss2pp9-14

A. Setiawan, “Stress-Strain Response Material Polymer Poly Lactid Acid dengan Experimental Measurements dan Numerical Simulations,” Tek. STTKD J. Tek. Elektron. Engine, vol. 6, no. 1, pp. 10–16, 2020, DOI: 10.56521/teknika.v6i1.184.

N. A. Puspitasari and P. Nugraha, “Simulasi Stress Analysis Pembebanan Statis Dengan Bantuan Software SolidWorks Pada Hasil Perancangan Ladder Frame Chassis Mobil Listrik Menggunakan Material AISI 4340,” Semin. Nas. – XX Rekayasa dan Apl. Tek. Mesin di Ind., no. November, pp. 25–33, 2021. https://eproceeding.itenas.ac.id/index.php/ratmi/article/view/758

T. Vukasovic, J. F. Vivanco, D. Celentano, and C. García-Herrera, “Characterization of the mechanical response of thermoplastic parts fabricated with 3D printing,” Int. J. Adv. Manuf. Technol., vol. 104, no. 9–12, pp. 4207–4218, 2019, DOI: 10.1007/s00170-019-04194-z.

T. Mulyanto and A. D. Sapto, “Analisis Tegangan Von Mises Poros Mesin Pemotong Umbi-Umbian Dengan Software SolidWorks,” J. PRESISI, vol. 18, no. 2, pp. 24–29, 2017, [Online]. Available: https://ejournal.istn.ac.id/presisi/article/view/122

Y. B. Pratiknyo, “Metode Pengukuran Tegangan Dan Regangan Menggunakan Cad/Cam/Cae Software; Study Komparasi Dengan Universal Testing Machine,” Semin. Nas. Otomasi Ii, 2005. http://repository.ubaya.ac.id/40704/3/Yuwono%20Budi%20Pratiknyo_METODE%20PENGUKURAN%20TEGANGAN%20DAN%20REGANGAN.pdf

S. Sheppard, “Applying software engineering to simulation,” Simulation, vol. 40, no. 1, pp. 13–19, 1983, DOI: 10.1177/003754978304000104.

A. I. Pramudi, “Analisis Pengaruh Internal Geometri Terhadap Sifat Mekanik Material PLA Dipreparasi Menggunakan 3D Printing,” Skripsi Tek. Mesin, Fak. Teknol. Ind. Inst. Teknol. Sepuluh Nop., pp. 1–57, 2017. https://repository.its.ac.id/42748/1/2713100032_Undergraduate%20Theses.pdf

Z. Wang, X. Li, and D. Yu, “Computer simulation analysis for Material mechanics,” Appl. Mech. Mater., vol. 160, pp. 185–189, 2012, DOI: 10.4028/www.scientific.net/AMM.160.185.

R. V. Petrova, “Introduction to Static Analysis Using SolidWorks Simulation,” Introd. to Static Anal. Using SolidWorks Simul., no. May, 2014, DOI: 10.1201/b17425.

Vrtiel, Hajdu, and M. Behúlová, “Analysis of the machine frame stiffness using numerical simulation,” IOP Conf. Ser. Mater. Sci. Eng., vol. 266, no. 1, 2017, DOI: 10.1088/1757-899X/266/1/012015.

DOI: http://dx.doi.org/10.30811/jpl.v21i1.3286