Design and stress analysis of adjustable chair on handcycle for persons with disabilities
Abstract
Handcycle is one of bicycle that used by someone with physical limitations, and this bicycle is operated by hand. Some people who have physical limitations will not be able to ride a bicycle in general, so a handcycle is made using three wheels to be able to maintain the balance of the rider's body. This handcycle is a solution for people with disabilities to be able to go somewhere and also exercise. In this study, an adjustable chair design was made that is suitable for handcycles and has an adjustable function, namely making the handcycle seat move forward or backward to make it easier for a rider to adjust the position of the legs in moving the handcycle. The material used to manufacture the adjustable chair on the handcycle is iron plate, which is an elbow-shaped iron plate with an angle of 90o. The length is 300 mm, width 200 mm and thickness 50 mm. After the design is made, then a stress analysis test with Autodesk Inventor 2016 is carried out on the adjustable chair on the handcycle by analyzing the strength of the chair and also the appropriate body posture when supporting the weight of a person with a disability. The final result of the adjustable chair applied to the handcycle was measured by stress analysis using Autodesk Inventor 2016 software. The material strength (Von Misess) for male users who weighs 70 kg has a maximum value of 1.767 MPa with a maximum displacement of 0.0059. As for female users weighing 60 kg, the maximum value is 1.514 MPa with a maximum displacement of 0.050.
Keywords
Full Text:
PDFReferences
S. Salsabila and N. C. Apsari, "Aksesibilitas Fasilitas Pelayanan Publik di Beberapa Wilayah dan Implementasi Undang-Undang dalam Memenuhi Hak Penyandang Disabilitas," Jurnal Penelitian dan Pengabdian Kepada Masyarakat (JPPM), vol. 2, no. 2, pp. 180-192, 2021.
R. A. Himarosa, "Design, Frame Analysis and Manufacture of Handcycle Prototype," in Journal of Physics: Conference Series, 2020, vol. 1471, no. 1: IOP Publishing, p. 012058.
F. Hettinga, L. Valent, W. Groen, S. Van Drongelen, S. De Groot, and L. Van der Woude, "Hand-cycling: an active form of wheeled mobility, recreation, and sports," Physical Medicine and Rehabilitation Clinics, vol. 21, no. 1, pp. 127-140, 2010.
F. J. Hettinga, S. de Groot, F. van Dijk, F. Kerkhof, F. Woldring, and L. van der Woude, "Physical strain during handcycling under daily living conditions," Medicine And Science In Sports And Exercise, vol. 42, no. 5, pp. 570-571, 2010.
F. J. Hettinga, M. Hoogwerf, and L. H. van der Woude, "Handcycling: training effects of a specific dose of upper body endurance training in females," European journal of applied physiology, vol. 116, no. 7, pp. 1387-1394, 2016.
N. Vignier, J.-F. Ravaud, M. Winance, F.-X. Lepoutre, and I. Ville, "Demographics of wheelchair users in France: Results of national community-based handicaps-incapacités-dépendance surveys," Journal of rehabilitation medicine, vol. 40, no. 3, pp. 231-239, 2008.
E. M. Smith, E. M. Giesbrecht, W. B. Mortenson, and W. C. Miller, "Prevalence of wheelchair and scooter use among community-dwelling Canadians," Physical therapy, vol. 96, no. 8, pp. 1135-1142, 2016.
M. P. LaPlante and H. S. Kaye, "Demographics and trends in wheeled mobility equipment use and accessibility in the community," Assistive Technology®, vol. 22, no. 1, pp. 3-17, 2010.
C. Kraaijenbrink et al., "Biophysical aspects of handcycling performance in rehabilitation, daily life and recreational sports; a narrative review," Disability and Rehabilitation, vol. 43, no. 24, pp. 3461-3475, 2021.
G. Legnani, G. Incerti, M. Lancini, and G. Azizpour, "An Identification Procedure for Evaluating the Dynamic Parameters of the Upper Limbs During Handcycling," in International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2018, vol. 51807: American Society of Mechanical Engineers, p. V05AT07A056.
S. Litzenberger, F. Mally, and A. Sabo, "Influence of different seating and crank positions on muscular activity in elite handcycling-a case study," Procedia Engineering, vol. 112, pp. 355-360, 2015.
E. Zipfel, J. Olson, J. Puhlman, and R. A. Cooper, "Design of a custom racing hand-cycle: review and analysis," Disability and Rehabilitation: Assistive Technology, vol. 4, no. 2, pp. 119-128, 2009.
S. Braganca, I. Castellucci, and P. Arezes, "Wheelchair users’ anthropometric data: analysis of existent available information," in Occupational Safety and Hygiene VI: CRC Press, 2018, pp. 23-27.
G. T. Goodlin, L. Steinbeck, D. Bergfeld, and A. Haselhorst, "Adaptive Cycling: Classification, Adaptations, and Biomechanics," Physical Medicine and Rehabilitation Clinics, vol. 33, no. 1, pp. 31-43, 2022.
S. Shore, "The long-term impact of wheelchair delivery on the lives of people with disabilities in three countries of the world," African Journal of Disability, vol. 6, no. 1, pp. 1-8, 2017.
S. Fatahul Arifin et al., "Studi analisis simulasi kekuatan beban pada alat bantu pembuatan lubang dengan sudut kemiringan 45 derajat," Jurnal Polimesin, vol. 18, no. 2, pp. 116-123, 2020.
Z. F. Emzain, U. S. Amrullah, and A. Mufarrih, "Analisis elemen hingga untuk siklus berjalan pada model prostetik lentur pergelangan kaki," Jurnal Polimesin, vol. 18, no. 2, pp. 91-98, 2020.
S. Pardeshi and P. Desle, "Design and Development of Effective Low Weight Racing Bicycle Frame," International Journal of Innovative Research in Science, Engineering and Technology, pp. 18215-18221, 2014.
B. Stone, B. S. Mason, M. B. Warner, and V. L. Goosey‐Tolfrey, "Shoulder and thorax kinematics contribute to increased power output of competitive handcyclists," Scandinavian journal of medicine & science in sports, vol. 29, no. 6, pp. 843-853, 2019.
A. Jeang, F. Liang, and H. F. Huang, "Handcycle design & development process for the disabled," in Proceedings of the 14th IFToMM World Congress, 2015, pp. 96-104.
G. G. Grindle, A. J. Deluigi, J. Z. Laferrier, and R. A. Cooper, "Evaluation of highly adjustable throwing chair for people with disabilities," Assistive Technology, vol. 24, no. 4, pp. 240-245, 2012.
F. Isharyadi and N. Desinta Rahayu, "Kesesuaian SNI 12-0179-1987 Bagi Penderita Disabilitas di Indonesia," Jurnal Standardisasi, vol. 15, no. 3, pp. 230-239, 2013.
A. Wisnujati and R. A. Himarosa, "Analysis the Strength of Mild Steel Material on a Handcycle Bike Frame," Logic: Jurnal Rancang Bangun dan Teknologi, vol. 21, no. 2, pp. 80-86, 2021.
A. Wisnujati, M. Yusuf, and A. Hudiatma, "Karakterisasi Pengecoran Poros Berulir (Screw) Dengan Variabel Paduan Unsur Titanium Boron Dan Magnesium," Jurnal Rekayasa Mesin, vol. 13, no. 1, pp. 29-36, 2022.
DOI: http://dx.doi.org/10.30811/jpl.v20i2.3013
Refbacks
- There are currently no refbacks.
![Creative Commons License](http://licensebuttons.net/l/by-sa/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional.
Mailing Address:
Jl. Banda Aceh-Medan
Km. 280,3, Buketrata, Mesjid Punteut, Blang Mangat,
Kota Lhokseumawe, 24301
Propinsi Aceh,
Indonesia