Hide
Show all
PRODUCT DESIGN SIMPLIFICATION TO INCREASE COMPETITIVENESS WITH A VALUE ENGINEERING APPROACH TO THE WASTAFEL FLEAN INDUSTRY
Abstract
The strength of international competitiveness encourages companies to do optimization. Therefore, the increase in productivity which improves competitiveness must be done. The purpose of this study is to look for the best solution to optimize designs with the best value and cheapest engineering approach that can be executed on the sink faucet production. After a value engineering, obtained high-cost items such as components with brass/metal, local and imported material. Then look for alternative designs with cost criteria, namely Life Circle Cost (LCC) and the Initial Cost as well as with zero one non-cost criteria matrix and pairs matrix. The result obtained a design that qualifies for the product by replacing the faucet's construction and dimensions but still meets the requirements of comfort, functionality, and safety in use. With this alternative earned savings of 19.6% of the total cost.
Keywords
Full Text:
PDFReferences
Alfatiyah, R., Bastuti, S., & Kurnia, D. (2020). Implementation of statistical quality control to reduce defects in Mabell Nugget products (case study at Pt. Petra Sejahtera Abadi). IOP Conference Series: Materials Science and Engineering, 852(1). https://doi.org/10.1088/1757-899X/852/1/012107
Aprina, B. (2019). ANALISA OVERALL RESOURCE EFFECTIVENESS UNTUK MENINGKATKAN DAYA SAING DAN OPERATIONAL EXCELLENCE Pasar konstruksi dan sektor bahan bangunan Indonesia telah berkembang secara signifikan , didorong oleh pesatnya. JITMI (Jurnal Ilmiah Teknik Dan Manajemen Industri), 2.
Ibusuki, U., & Kaminski, P. C. (2007). Product development process with focus on value engineering and target-costing: A case study in an automotive company. International Journal of Production Economics, 105(2), 459–474. https://doi.org/10.1016/j.ijpe.2005.08.009
Izzati, M. F., & Wilopo. (2018). Implemeasi Triple Helix dalam Mendorong Pertumbuhan Industri Kreatif di Kota Malang sebgai Upaya Peningkatan Daya Saing untuk Menghadapi Masyarakat Ekonomi ASEAN. Jurnal Administrasi Bisnis, 55(1), 59–68.
Jefi, M., Cahyono, N., & Trisunarno, L. (2012). Putri Indah Lestary 2. 1, 506–509.
Labombang, M. (2007). Penerapan Rekayasa Nilai (Value Engineering) pada Konstruksi Bangunan. SMARTek, 5(3), 147–156.
Lukiastuti, F., & Pantawis, S. (2019). Peran Strategi Operasi Terhadap Pengembangan Daya Saing UKM Bandeng Presto di Tambakrejo Semarang. Seminar Nasional Sains & Entrepreneurship, 1(1), 580–592.
Muhson, A. (2006). Teknik Analisis Kuantitatif. Makalah Teknik Analisis II, 1–7. http://staffnew.uny.ac.id/upload/132232818/pendidikan/Analisis+Kuantitatif.pdf
Pontoh, M. M., Tarore, H., Mandagi, R. J. M., & Malingkas, G. Y. (2013). Aplikasi Rekayasa Nilai Pada Proyek Konstruksi Perumahan ( Studi Kasus Perumahan Taman Sari Metropolitan Manado Pt . Wika Realty ). Jurnal Teknik Sipil, 1(5), 328–334.
Rantan, R., Djumantara, M., & Samsol, S. (2020). Pemilihan Pola Injeksi Air Dengan Menggunakan Simulasi Reservoir Untuk Optimasi Produksi Lapangan ‘R.’ PETRO:Jurnal Ilmiah Teknik Perminyakan, 9(2), 81. https://doi.org/10.25105/petro.v9i2.6554
Restantin, N. Y., Ushada, M., & Ainuri, M. (2012). Desain Prototipe Meja dan Kursi Pantai Portabel dengan Integrasi Pendekatan Ergonomi, Value Engineering dan Kansei Engineering. Jurnal Teknik Industri, 14(1). https://doi.org/10.9744/jti.14.1.53-62
Ruspendi, R. (2019). Strategi Keunggulan Bersaing Industri Retail Komponen Otomotif Dalam Upaya Meningkatkan Kinerja Di Pt. Astra Otoparts Tbk. JITMI (Jurnal Ilmiah Teknik Dan Manajemen Industri), 2(1), 18. https://doi.org/10.32493/jitmi.v2i1.y2019.p18-26
Suigiyono. (2012). Metode Penelitian Kuantitatif, Kualitatif, dan Tindakan.
Supriyanto, H. (2018). Pemberdayaan dan Penguatan Daya Saing Usaha dengan Penerapan Lean Six-Sigma Concept, Studi Kasus. Jurnal Manajemen Dayasaing, 20(1). https://doi.org/10.23917/dayasaing.v20i1.5997
W, A. R. (2018). Perancangan Peningkatan Optimalisasi Produksi Dengan Pendekatan Function Analisys System Technique ( Fast ) Pada Desain Produk Industri Kran Wastafel. Jitmi, 1(2).
DOI: http://dx.doi.org/10.30811/jpl.v19i2.2050
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional .
Alamat Surat :
Politeknik Negeri LhokseumaweJl. Banda Aceh-Medan Km 280
Buketrata, Lhokseumawe, 24301, Aceh, Indonesia