PENGOLAHAN BENTONIT MURNI MENJADI BENTONIT NANOKOMPOSIT

S Suryani

Sari


ABSTRAK

Penelitian pendahuluan untuk mengolah bentonit yang bersumber dari bahan anorganik dan bersifat hydrofillik telah berhasil dilakukan. Pengolahan ini dilakukan untuk menghasilkan bentonit yang sesuai dengan polimer yang berbahan organik dan bersifat hydrofobic. Kesesuaian ini penting dalam rangka menghasilkan suatu polymer baru yang lebih baik dari segi sifat mekanik, fisik dan kimia daripada polymer asli. Pada penelitian ini pengujian dilakukan dengan mengunakan X-ray diffraction (X-RD) dimana hasil yang diperoleh adalah d-spacing bentonit yang belum diolah, 1.57 nm dan setelah diolah dengan CTAB d-spacing melebar menjadi 1.96, yang bermakna sejumlah alkyl ammonium sudah terinterkalasi dalam lapisan bentonit murni.

Kata kunci : bentonit, interkalasi dan organik


Teks Lengkap:

PDF

Referensi


Aijuan G. ; Guozheng L. Thermal degradation behaviour and kinetic analysis of epoxy/montmorillonite nanocomposites Polymer Degradation and Stability 80 (2003) 383–391

Akane O. and Arimitsu U., “The chemistry of polymer-clay hybrids, â€Materials Science and Engineering†C 3 ( 1995) 109- 115

Florencio,G . Ramos Filho, Tomas Jeferson A. Meo, Marcelo S.R., Suedina M.L. S., “Thermal stability of nanocomposites based on polypropylene and bentonite†Polymer Degradation and Stability 89 (2005) 383-392.

Imre D., Ferenc S., and Lajos G., “Sorption and Immersional Wetting on Clay Minerals Having Modified Surface II. Interlamellar Sorption and Wetting Montmorillonites†on Organic Journal of Colloid and Interface Science. Vol. 109, No. 2, (1986) 376 – 384

Jin, H.C., “Synthesis of Poly(buty1ene terephthalate) Nanocomposite by Insitu Interlayer Polymerization and Characterization of Its Fiber (1)â€, Polymer Bulletin 51 (2003) 69-75

Masaya K. et.al , “Liquid crystalrclay mineral composites†Applied Clay Science 15 (1999) 93-108.

Michail V. et.al., “Synthesis, structure, thermal and mechanical properties of nanocomposites based on linear polymers and layered silicates modified by polymeric quaternary ammonium salts (ionenes)â€, Polymer 46 (2005) 12226–12232

Nehal S. and Mohammed S, “Polymethylmethacrylate-montmorillonite composites : preparation, characterization, and propertiesâ€, Polymer 42 ( 2001) 8379 - 8385

Rihayat T., Saari M., Muhammad Hilmi M,. W. M. Z. W. Yunus , Suraya A.R , K. Z. H. M. Dahlan, “Thermoplastic polyurethane elastomers based on palm oilâ€, Journal of Applied Technology, Vol 3 (2005) 71-76

Suprakas S. R. and Masami O., “Polymer/layered silicate nanocomposites: a review from preparation to processingâ€, Prog. Polym. Sci. 28 (2003) 1539–1641

T.G. Gopakumar, J.A. Lee, M. Kontopoulou, J.S. Parent, “Influence of clay exfoliation on the physical properties of montmorillonite/polyethylene compositesâ€, Polymer 43 (2002) 5483 - 5491.

Usuki, A.; Kojima, Y.; Kawasumi.; Okada, A.; Kurauchi, T.;Fukushima, Kamigaito, Y.; O. Synthesis of nylon 6-clay hybrid. Journal of Materials Resesarch Vol 8 No. 5 (1993) 1185-1189

Zhenshi S., Yingxu C., Qiang K., Ye Y., Jun Y., “Photocatalytic degradation of cationic azo dye by TiO2/bentonite nanocomposite “, Journal of Photochemistry and Photobiology A: Chemistry 149 (2002) 169–174




DOI: http://dx.doi.org/10.30811/jstr.v22i02.6426

Refbacks

  • Saat ini tidak ada refbacks.


Creative Commons License

Jurnal Sains dan Teknologi Reaksi is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License

© 2016 All rights reserved |Jurnal Sains dan Teknologi Reaksi p-ISSN: 1693-248X , e-ISSN: 2549-1202.