CHARACTERIZATION OF BIODEGRADABLE POLYURETHANE POLYMER BASED ON BENTONITE-CHITOSAN HYBRID PALM

Sabiila Yasara SA, S Syafruddin, Teuku Rihayat

Sari


Corrosion problems that often occur cause various damages and losses. The coating process has the advantage of being able to protect the metal surface from environmental influences that result in corrosion of the metal. The innovation of combining Polyurethane with Bentonite-Chitosan filler is able to make the polymer have better corrosion resistance. This study aims to see the effect of mixing between Polyurethane and Bentonite-Chitosan filler. The sample formulation used is polyurethane with variations of bentonite and chitosan 1%, 3%, 5%, 7%, 9%. The addition of Bentonite-chitosan filler affects the mechanical properties of the material. Characterization with the addition of Bentonite and Chitosan produces a polymer that has good thermal stability and good corrosion resistance. Test result Fourier Transform Infrared(FT-IR) there are functional groups NH, CH, C=O. Based on test resultsThermogravimetric Analysis(TGA) samplePolyurethane with modified bentonite 9%/chitosan 9% w/w has the best thermal stability among other samples where the sample starts to degrade (on set) at 419.22(oC) and stops degrading (end set ) at 521.94 (oC) with a weight loss of -31.156%. Polyurethane samples with 1% bentonite/chitosan 9% w/w modification had lower thermal stability where the sample started to degrade (onset) 312.21 (oC) and stopped degrading (end set) at 391.09 (oC) with a weight loss of -55.729 %. The results of the morphological test using the SEM tool show that the chitosan chains dispersed well into the bentonite interlayer. The corrosion test showed that the addition of bentonite and chitosan affected the corrosion rate, the greater the composition of bentonite and chitosan, the lower the corrosion rates. the best sample with a ratio of Polyurethane/Bentonite/Chitosan 9:9% w/w experienced the smallest corrosion rate of 5.08mpy and a mass loss of 0.1 gram.


Keywords: Biodegradable, Corrosion, Polyurethane, Bentonite, Chitosan


Teks Lengkap:

PDF (English)

Referensi


X. Wang et al., “Preparation and characteristics of crosslinked fluorinated acrylate modified waterborne polyurethane for metal protection coating,” Prog Org Coat, vol. 158, Sept. 2021, doi: 10.1016/j.porgcoat.2021.106371.

M. Arifullah and I. Widyastuti, "CORROSION RATE OF CARBON STEEL RESULTING FROM POWDER COATING AND LIQUID PAINTING," 2015.

X. Chang et al., “Alumina nanoparticles-reinforced graphene-containing waterborne polyurethane coating for enhancing corrosion and wear resistance,” Corrosion Communications, vol. 4, pp. 1–11, Dec. 2021, doi: 10.1016/j.corcom.2021.11.004.

PM Paraskar, MS Prabhudesai, VM Hatkar, and RD Kulkarni, “Vegetable oil based polyurethane coatings – A sustainable approach: A review,” Progress in Organic Coatings, vol. 156. Elsevier BV, Jul. 01, 2021. doi: 10.1016/j.porgcoat.2021.106267.

SSMF Rihayat T, "SYNTHESIS OF POLYURETHANE/BENTONITE/CHITOSAN NANOCOMPOSITE FOR THE HEAT RESISTANT PROPERTIES OF COATING MATERIALS," CHEMICAL ENGINEERING, Aug. 2016.

M. Heidarian, MR Shishesaz, SM Kassiriha, and M. Nematollahi, “Characterization of structure and corrosion resistivity of polyurethane/organoclay nanocomposite coatings prepared through an ultrasonication assisted process,” Prog Org Coat, vol. 68, no. 3, pp. 180–188, Jul. 2010, doi: 10.1016/j.porgcoat.2010.02.006.

H. Agusnar, D. Reflianto, and S. Gea, "The Manufacture of Palm Oil-Based Polyurethane Nanocomposite with Organic Montmorillonite Nanoparticles as Paint Coatings," 2014.

S. Das, P. Pandey, S. Mohanty, and SK Nayak, “Evaluation of biodegradability of green polyurethane/nanosilica composite synthesized from transesterified castor oil and palm oil based isocyanate,” Int Biodeterior Biodegradation, vol. 117, pp. 278–288, Feb. 2017, doi: 10.1016/j.ibiod.2017.01.015.

M. Tampubolon, R. Ganda Gultom, L. Siagian, P. Lumbangaol, and C. Manurung, "Corrosion Rate of Medium Carbon Steel Due to the Immersion Process in Sulfuric Acid (H 2SO4) and Hydrochloric Acid (HCl) Solutions with Varying Times, ” vol. 2, no. 1, 2020.

Puji Dhian Wijaya, "Analysis of Corrosion Rates on Carbon Steel Plates with Varying Coating Thickness," ITS ENGINEERING JOURNAL, vol. 4, no. 1, 2015.

S. Loganathan, R.B. Valapa, R.K. Mishra, G. Pugazhenthi, and S. Thomas, “Thermogravimetric Analysis for Characterization of Nanomaterials,” in Thermal and Rheological Measurement Techniques for Nanomaterials Characterization, Elsevier, 2017, pp. 67–108. doi: 10.1016/B978-0-323-46139-9.00004-9.

I. Yusuf, M. Yunus, T. Rihayat, SY Sa, and N. Aidy, "Addition of Aceh bentonite in an effort to improve the heat resistance properties of polyurethane-based paint coatings," Disseminating Information on the Research of Mechanical Engineering -Polymesin Journal, vol. 21, no. 3, pp. 2023–2029, 2023, [Online]. Available: http://e-jurnal.pnl.ac.id/polimesin

T. Rihayat et al., "Formulation of Polyurethane with Bentonite-Chitosan as Filler Applied to Carbon Steel as an Antibacterial and Environmentally Friendly Paint," in IOP Conference Series: Materials Science and Engineering, Institute of Physics Publishing, 2019. doi: 10.1088 /1757-899X/536/1/012093.




DOI: http://dx.doi.org/10.30811/jstr.v21i02.4942

Refbacks

  • Saat ini tidak ada refbacks.


Creative Commons License

Jurnal Sains dan Teknologi Reaksi is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License

© 2016 All rights reserved |Jurnal Sains dan Teknologi Reaksi p-ISSN: 1693-248X , e-ISSN: 2549-1202.