THE EFFECT OF ADDING CHITOSAN ON THE MECHANICAL PROPERTIES OF ECO-FRIENDLY PLASTICS BASED ON PLA/PCL

Dinda Alfatasya, S Suryani

Sari


ABSTRACT

Research into making eco-friendly plastic has been developed because it is environmentally friendly and renewable. In this research, eco-friendly plastic was made from Polylactic Acid (PLA) and Polycaprolactone (PCL) with the addition of chitosan as a filler. The aim of this research is to study and determine the effect of mixing variations in PLA/PCL/chitosan composition on the mechanical properties of eco-friendly plastic using a hot press at a temperature of 200 0C for 1 hour. The PLA/PCL variations are 2/8 g, 3/7 g, 5/5 g, 7/3 g and 8/2 g while the chitosan composition is 0.2 g, 0.3 g, 0.4 g, 0, 5 g and 0.6 g. The characteristics of eco-friendly plastic can be seen through biodegradation tests, tensile strength tests, elongation tests, functional group tests and plastic film morphology tests. The results of the characterization of eco-friendly plastic with optimal performance are a composition of PLA/PCL/Chitosan 8/2/0.6 grams which produces 38.8% degradation percentage, a tensile strength value of 42.53 MPa with a composition of PLA/PCL/Chitosan 8 /2/0.4 grams, elongation percentage of 6.96% with a PLA/PCL/Chitosan composition of 8/2/0.2 grams. Meanwhile, the functional groups contained are the N – H, C – H, C = O and C – O groups. The results of the identification of functional groups show that no new functional groups are formed, but only a mixing process without any reaction in the constituent materials. Based on the results of the morphology test, it shows that the sample has a smooth surface. However, there is still chitosan that does not dissolve because the mixing process is not homogeneous.

Keywords: Chitosan, Polycaprolactone (PCL), Polylactic Acid (PLA)


Teks Lengkap:

PDF (English)

Referensi


Coniwanti, Pamilia., Laila, Linda., Alfira, Mardiyah Rizka. 2014. Making Biodegradable Plastic Film from Corn Starch with the Addition of Chitosan and Glycerol Plasticizer. Journal of Chemical Engineering. Sriwijaya University. 4 (20) : 22-30

Darni, Y., Lismeri, L., Hanif, M., Sarkowi, S., & Evaniya, D. S. (2020). Increasing the Tensile Strength of Bioplastics with Microfibrillated Cellulose Filler from Sorghum Stems. Indonesian Journal of Chemical Engineering, 18(2), 37-41.

Fontelny, I., Ujcic, A., Fambri, L., & Slouf, M. (2019). Phase structure, compatibility, and toughness of PLA/PCL blends: A review. Frounties in Materials, 6, 206.

Huwaidi, A. F., & Supriyo, E. (2022). Making Biodegradable Plastic Sorbitol Plasticized Corn Starch with Cellulose Filler from Sugarcane Bagasse. Equilibrium Journal of Chemical Engineering, 6(1), 45-49.

Indarti, E., Marlita, A. S., & Zaidiyah, Z. (2020). Transparency and Permeability Properties of Bionanocomposite Film of Polylactic Acid and Polycaprolactone, and Nanocrystalline Cellulose as a Filler. Journal of Agricultural Products Technology & Industry, 25(2), 81-89.

Kusmiati, A. R., & Hayati, N. (2020). Utilization of Chitosan from Shrimp Shells as an Adsorbent for the Heavy Metal Pb in Pharmaceutical Chemistry Practical Waste. Indonesian Journal of Laboratory, 3(1), 6-14.

Putra, A. D., Amri, I., & Irdoni, I. Synthesis of Bioplastics Based on Corn Starch with the Addition of Pineapple Leaf Fiber Cellulose Filler (Ananas cosmosus). Student Online Journal (JOM) Engineering and Science, 6, 1-8.

Rahmayetty, R., Kanani, N., & Wardhono, E. Y. (2018). Effect of PLA Addition to Glycerol Plasticized Starch on the Mechanical Properties of Blend Film. Semnastek Proceedings.

Ridwan, R., Wirjosentono, B., Tamrin, T., Siburian, R., Rihayat, T., & Nurhanifa, N. (2018, December). Modification of PLA/PCL/Aceh's bentonite nanocomposites as biomedical materials. In AIP Conference Proceedings (Vol. 2049, No. 1). AIP Publishing.

Rochaeni, U. A., Irdoni, H. S., & Bahruddin, B. Effect of Chitosan Filler and Glycerol Plasticizer Levels on the Properties and Morphology of Sago Starch-Based Bioplastics (Doctoral dissertation, Riau University).

Sari, N. I., Syahrir, M., & Pratiwi, D. E. (2022). The Effect of Adding Chitosan and CaCO 3 Fillers on the Bioplastic Characteristics of Gadung Tubers (Dioscorea Hispida Densst). Chemica, 23(1), 78-89.

Suryani, S., Rihayat, T., Fitria, F., & Safitri, A. (2022). Making Environmentally Friendly Bioplastics Based on PLA-PCL with Composite Catechin and Chitosan as a Substitute for Petroleum Based Plastics. Journal of Reaction Science and Technology, 20(01)

Warastuti, Y., Abbas, B., & Suryani, N. (2017). Preparation of irradiated polycaprolactone-chitosan-hydroxyapatite composite for biomaterial applications (Preparation of Irradiated Polycaprolactone-Chitosan-Hydroxyapatite for Biomaterial Application). Metallurgy, 28(2), 149-160.

Wirjosentono, B., & Rihayat, T. (2019). Preparation Of Chitosan PCL/PLA Nanocomposite Blended With Bentonite From Aceh, Indonesia. Rasayan Journal of Chemistry,12(4).




DOI: http://dx.doi.org/10.30811/jstr.v21i02.4814

Refbacks

  • Saat ini tidak ada refbacks.


Creative Commons License

Jurnal Sains dan Teknologi Reaksi is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License

© 2016 All rights reserved |Jurnal Sains dan Teknologi Reaksi p-ISSN: 1693-248X , e-ISSN: 2549-1202.