INFLUENCE OF THE ADDITION OF PARAFFIN AND GRAPHITE ON ETHYLENE PROPHYLENE DIENE MONOMER (EPDM) FOR THERMAL ENERGY STORAGE

Pocut Nurul Alam, Isra Adelya Izzati, Rima Dhinta Dewi Astuti, Umi Qhanita Putri Swya, Teuku Muhammad Daffa Rihayat

Sari


This study aims to determine the effect of the paraffin: graphite ratio on the thermal resistance of the Phase Change Material (PCM). PCM mixed with Ethylene Propylene Diene Monomer (EPDM) which has good compatibility with paraffins as a base polymer for preparing paraffin graphite composites. The samples was prepared by using heating method at 180oC for 20 minutes with a variation of the ratio 9:1 and 8:2 with mass ratios PCM70 : EPDM30, PCM80 : EPDM20, and PCM90 : EPDM10. Based on the results of tensile strength testing, thermal stability analysis and SEM. the maximum tensile strength is obtained at a mass ratio of 80% : 20% with a ratio of 9:1 which is 9.34 Mpa, has a thermal stability of 307.04oC at onset and Endset at a temperature of 399.50oC, However, there is an aggregate form that is agglomerate and has large pores, as well as a rough surface on the sample. While the results of the Morphology test using SEM, the best interaction between polymers with a mass ratio of 70%:30% at a ratio of 9:1, with a very well mixed surface, smooth, no lumps formed.

 Keywords: EPDM; Graphite;Paraffin;PCM;Polymers

 


Teks Lengkap:

PDF (English)

Referensi


Sarı, G. Hekimoglu, ˘ V.V. Tyagi, R.K. Sharma (2020). Evaluation of pumice for development of low-cost and energy-efficient composite phase change materials and lab-scale thermoregulation performances of its cementitious plasters. Energy, 207, 118242. https://doi.org/10.1016/j.energy.2020.118242

Atinafu, D. G., Ok, Y. S., Kua, H. W., & Kim, S. (2020). Thermal properties of composite organic phase change materials (PCMs): A critical review on their engineering chemistry. Applied Thermal Engineering, 181, 115960.

https://doi.org/10.1016/j.applthermaleng.2020.115960

Wang, W. Liang, Z. Tang, J. Jia, F. Liu, Y. Yang, H. Sun, Z. Zhu, A. Li. (2020). Enhanced light-thermal conversion efficiency of mixed clay base phase change composites for thermal energy storage. Appl. Clay Sci, 189, 105535. https://dx.doi.org/10.1016/j.renene.2021.07.028

Li, M. Wang, B. Xie, H. Ma, J. Chen. (2020). Enhanced properties of diatomite-based composite phase change materials for thermal energy storage. Renew. Energy, 147, 265–274. https://doi.org/10.1016/j.renene.2019.09.001.

Teuku Rihayat, Suryani, Zaimahwati, Salmyah, Sariadi, Fitria, Satriananda, Alfian Putra, Zahra Fona, Juanda, Raudah, Aida Safitri, Mawaddah, Nurhanifa, Shafira Riskina and Wildan Syahputra. (2019). Composition on Essential Oil Extraction from Lemongrass Fragrant by Microwave Air Hydro Distillation Method to Perfume Dermatitis Production. IOP Conf. Ser.: Mater. Sci. Eng, 506, 012053. doi:10.1088/1757-899X/506/1/012053

J. Huang, B. Wu, S. Lyu, T. Li, H. Han, D. Li, J.-K. Wang, J. Zhang, X. Lu, D. Sun. (2021). Improving the thermal energy storage capability of diatom-based biomass/ polyethylene glycol composites phase change materials by artificial culture methods. Sol. Energy Mater. Sol. Cell, 219, 110797. https://doi.org/10.1016/j.solmat.2020.110797

J. Huang, Y. Luo, M. Weng, J. Yu, L. Sun, H. Zeng, Y. Liu, W. Zeng, Y. Min, Z. Guo. (2021). Advances and applications of phase change materials (PCMs) and PCMs-based technologies. ES. Mater. Manuf, 13, 23–39. DOI:10.30919/esmm5f458

Teuku Rihayat, Suryani, Satriananda, Ridwan, Nurhanifa, Alfian Putra, Nia Audina, Muhammad Yunus, Sariadi, Safari, Ramzi Jalal, Nani Siska Putri Khan, Saifuddin. 2018. Influence of coating polyurethane with mixture of bentonite and chitosan nanocomposites. AIP Conference Proceedings, 2049, 1-6. https://doi.org/10.1063/1.5082425

Liu, J., Zou, X., Cai, Z., Peng, Z., & Xu, Y. (2021). Polymer based phase change material for photo-thermal utilization. Solar Energy Materials and Solar Cells, 220, 110852. https://doi.org/10.1016/j.solmat.2020.110852

Yanni Liu, Ningning Wang, Yunfei Ding. (2021). Preparation and properties of composite phase change material based on solar heat storage system. Journal of energy storage, 2021-40, 102805. DOI:10.1016/j.est.2021.102805

Suryani, Fitria, Rihayat, Teuku, Aidy, Nurhanifa, Hasnah, T. (2020). Chitosan Modified Bio-Fibre Based Board as Antimicrobial and Anti-Crack Board. IOP Conference Series: Materials Science and Engineering, 854, 012050. DOI:10.1088/1757-899X/854/1/012050

Yue Luo, Suya Xiong, Jintao Huang, Feng Zhang, Chong chong Li, Yonggang Min, Ruitao Peng, Yidong Liu. (2021). Preparation, characterization and performance of paraffin/sepiolite composites as novel shape-stabilized phase change materials for thermal energy storage. Solar Energy Materials and Solar Cells, 231, 111300. https://doi.org/10.1016/j.solmat.2021.111300

Zhaodi Tang, Hongyi Gao, Xiao Chen, Yafei Zhang, Ang Li and Ge Wang. (2021). Advanced Multifunctional Composite Phase Change Materials Based on Photo Responsive Materials. Nano Energy, 80, 105454. https://doi.org/10.1016/j.nanoen.2020.105454

Safitri, Nelly, Syahputra, R, Putri, K, Rihayat, Teuku, Aidy, Nurhanifa. (2020). Refining Citronella Oil (Cymbopogon Nardus L) by Utilizing Sunlight Using Solar Cells (Photovoltaics). IOP Conference Series: Materials Science and Engineering, 854, 012051 DOI:10.1088/1757-899X/854/1/012051

Rihayat, Teuku, Suryani, Satriananda, Riskina, Shafira, Syahputra, Wildan, Aidy, Nurhanifa, Mawaddah. (2019). Formulation of Polyurethane with Bentonite-Chitosan as Filler Applied to Carbon Steel as an Antibacterial and Environmentally Friendly Paint. IOP Conference Series: Materials Science and Engineering, 536, 012093. DOI:10.1088/1757-899X/536/1/012093

Nazzi Ehms, J. H., De Césaro Oliveski, R., Oliveira Rocha, L. A., & Biserni, C. (2018). Theoretical and numerical analysis on phase change materials (PCM): A case study of the solidification process of erythritol in spheres. International Journal of Heat and Mass Transfer, 119, 523–532. https://doi.org/10.1016/j.ijheatmasstransfer.2017.11.124

Al-Jethelah, M., Humaira Tasnim, S., Mahmud, S., & Dutta, A. (2018). Melting of nano-PCM in an enclosed space: Scale analysis and heatline tracking. International Journal of Heat and Mass Transfer, 119, 841–859. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2017.11.106

Seddegh, S., Wang, X., Joybari, M. M., & Haghighat, F. (2017). Investigation of the effect of geometric and operating parameters on thermal behavior of vertical shell-and-tube latent heat energy storage systems. Energy, 137, 69–82. https://doi.org/10.1016/j.energy.2017.07.014

Miao, W., Gan, S., Li, X., & Lv, Y. (2020). A triply synergistic method for palygorskite activation to effectively impregnate phase change materials (PCMs) for thermal energy storage. Applied Clay Science, 189, 105530. DOI: 10.1016/j.clay.2020.105530

Acır, A., & Emin Canlı, M. (2018). Investigation of fin application effects on melting time in a latent thermal energy storage system with phase change material (PCM). Applied Thermal Engineering, 144, 1071–1080. DOI:10.1016/j.applthermaleng.2018.09.013




DOI: http://dx.doi.org/10.30811/jstr.v21i01.4169

Refbacks

  • Saat ini tidak ada refbacks.


Creative Commons License

Jurnal Sains dan Teknologi Reaksi is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License

© 2016 All rights reserved |Jurnal Sains dan Teknologi Reaksi p-ISSN: 1693-248X , e-ISSN: 2549-1202.