Penggunaan material berubah fasa sebagai penyimpan energi termal  pada bangunan gedung

Hamdani Umar

doi:10.30811/jpl.v18i2.1832

Penggunaan material berubah fasa sebagai penyimpan energi termal pada bangunan gedung

Hamdani Umar

Abstract

The energy consumption of the world building sector reaches 30% of overall energy consumption and accounts for one third of greenhouse gas emissions worldwide. Thermal energy storage is a simple and effective technique to be applied to buildings to improve building energy efficiency, and is expected to reduce the environmental impacts associated with energy use. Thermal storage by utilizing phase change material (PCM) is the most promising technique because of its high energy storage capability and small temperature changes. The combination of building materials and PCM is an efficient way to increase the thermal energy storage capacity of building components for the purpose of storing thermal energy directly in buildings. In this study the results of testing the use of beeswax as a phase change material in building concrete are given. The test results of concrete equipped with beeswax as PCM decreased the strength of the concrete but on the other hand it was able to absorb and store heat energy. The results of application analysis in buildings are able to reduce indoor cooling loads.

Keywords

Phase change material, energy, concrete, building, efficiency

Full Text:

PDF (Bahasa Indonesia)

References

Ministry Of Energy and Mineral Resources Republic of Indonesia. Handbook of Energy & Economic Statistics of Indonesia. 2017;72.

Republik Indonesia P. Peraturan Pemerintah Republik Indonesia Nomor 79 Tahun 2014 Tentang Kebijakan Energi Nasional. 2014. p. 36.

Direktorat Konservasi Energi Kementerian Energi dan Sumber Daya Mineral. Panduan Pengguna Untuk Sektor Komersial (Indonesia 2020 Pathway Calculator). Kementerian Energi dan Sumber Daya Mineral. 2014;1–15.

Li G, Zheng X. Thermal energy storage system integration forms for a sustainable future. Renewable and Sustainable Energy Reviews [Internet]. 2016 Sep 1 [cited 2018 Mar 25];62:736–57. Available from: https://www.sciencedirect.com/science/article/pii/S1364032116301095?via%3Dihub

Sharma A, Tyagi V V., Chen CR, Buddhi D. Review on thermal energy storage with phase change materials and applications. Renewable and Sustainable Energy Reviews. 2009;13(2):318–45.

Memon SA. Phase change materials integrated in building walls: A state of the art review. Renewable and Sustainable Energy Reviews. 2014;31:870–906.

Sari A, Karaipekli A. Fatty acid esters-based composite phase change materials for thermal energy storage in buildings. Applied Thermal Engineering. 2012;37:208–16.

Sari A, Karaipekli A. Preparation, thermal properties and thermal reliability of palmitic acid/expanded graphite composite as form-stable PCM for thermal energy storage. Solar Energy Materials and Solar Cells. 2009;93(5):571–6.

Wang E, Kong X, Rong X, Yao C, Yang H, Qi C. A Study on a Novel Phase Change Material Panel Based on Tetradecanol/Lauric Acid/Expanded Perlite/Aluminium Powder for Building Heat Storage. Materials. 2016;9(11):896.

Xu B, Li Z. Paraffin/diatomite composite phase change material incorporated cement-based composite for thermal energy storage. Applied Energy. 2013;105:229–37.

Amin M, Putra N, Kosasih EA, Prawiro E, Luanto RA, Mahlia TMI. Thermal properties of beeswax/graphene phase change material as energy storage for building applications. Applied Thermal Engineering. 2017;112:273–80.

Cui H, Memon SA, Liu R. Development, mechanical properties and numerical simulation of macro encapsulated thermal energy storage concrete. Energy and Buildings. 2015;96:162–74.

Castell A, Martorell I, Medrano M, P??rez G, Cabeza LF. Experimental study of using PCM in brick constructive solutions for passive cooling. Energy and Buildings. 2010;42(4):534–40.

Baetens R, Jelle BP, Gustavsen A. Phase change materials for building applications: A state-of-the-art review. Energy and Buildings. 2010;42(9):1361–8.

Cabeza LF, Castell A, Barreneche C, de Gracia A, Fernández AI. Materials used as PCM in thermal energy storage in buildings: A review. Renewable and Sustainable Energy Reviews [Internet]. 2011 Apr 1 [cited 2018 Mar 25];15(3):1675–95. Available from: https://www.sciencedirect.com/science/article/pii/S1364032110003874?via%3Dihub

Barrenechea C, Navarro H, Serrano S, Cabeza LF, Fernández AI. New database on phase change materials for thermal energy storage in buildings to help PCM selection. Energy Procedia [Internet]. 2014;57:2408–15. Available from: http://dx.doi.org/10.1016/j.egypro.2014.10.249

Cui Y, Xie J, Liu J, Pan S. Review of Phase Change Materials Integrated in Building Walls for Energy Saving. Procedia Engineering [Internet]. 2015;121:763–70. Available from: http://dx.doi.org/10.1016/j.proeng.2015.09.027

Grega Klancnik, Jozef Medved PM. Differential thermal analysis ( DTA ) and differential scanning calorimetry ( DSC ) as a method of material investigation. Materials and Geoenvironmentent. 2010;57(1):127–42.

Yinping Z, Yi J. A simple method , the T -history method , of determining the heat of fusion , specific heat and thermal conductivity of phase-change materials. Measurement Science and Technology. 1999;10(3):201–5.

Mandilaras I, Stamatiadou M, Katsourinis D, Zannis G, Founti M. Experimental thermal characterization of a Mediterranean residential building with PCM gypsum board walls. Building and Environment. 2013;61:93–103.

Shukla N, Fallahi A, Kosny J. Performance characterization of PCM impregnated gypsum board for building applications. Energy Procedia 30 ( 2012 ) 370 – 379 SHC. 2012;30:370–9.

Feldman, D., Banu, D., & Hawes, D. W. (1995). Development and application of organic phase change mixtures in thermal storage gypsum wallboard. Solar Energy Materials and Solar Cells, 36(2), 147–157.

Bentz, D. P., & Turpin, R. (2007). Potential applications of phase change materials in concrete technology. Cement and Concrete Composites, 29(7), 527–532.

Zhang Y, Zhou G, Lin K, Zhang Q, Di H. Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook. Building and Environment. 2007;42(6):2197–209.

`Alam TE, Dhau JS, Goswami DY, Stefanakos E. Macroencapsulation and characterization of phase change materials for latent heat thermal energy storage systems. Applied Energy. 2015;154(September):92–101.

DOI: http://dx.doi.org/10.30811/jpl.v18i2.1832