Pengaruh implantasi ion tin (Titanium Nitrida) terhadap sifat mekanis baja VCL 140

Muhammad Muhammad

doi:10.30811/jp.v8i1.1337

Pengaruh implantasi ion tin (Titanium Nitrida) terhadap sifat mekanis baja VCL 140

Muhammad Muhammad

Abstract

Implantasi ion dapat meningkatkan sifat mekanik seperti kekerasan bahan yang akan digunakan untuk komponen dan peralatan proses manufaktur. Implantasi ion dipengaruhi oleh jenis ion dopan, waktu dan energi yang digunakan. Penelitian ini dilakukan untuk mengetahui pengaruh energi dan waktu implantasi ion titanium nitrida terhadap kekerasan dan struktur mikro pada baja VCL 140. Implantasi dilakukan pada arus berkas tetap 10 yA. Variasi waktu 60, 70, 80, 90, 100, 110, 120 menit, energi 75 keV dan variasi energi 15, 30, 45, 60, 75, 90 dan 100 keV dengan waktu implantasi 100 menit dilakukan untuk mendapatkan kekerasan optimum. Uji Kekerasan menggunakan metode Vickers dengan beban 10 gram dan waktu 10 detik. Topografi dari lapisan TIN diamati menggunakan scanning electron microscopy (SEM) dan komposisi kimia dari lapisan TIN dianalisa menggunakan energy dispersive spectroscopy (EDS).

Kata kunci : Implantasi ion, VCL 140, kekerasan

Full Text:

PDF

References

ASTM, "Annual ASTM Standards bag.10 Metal, Physical, Mechanical Corrosion Testing”.1981.

Azushima, A., Tanno, Y., Iwata, H., Aoki, K., ”Coefisien of Friction TiN Coatings With Preferred '— Grain Orientations Under Dry Condition”, Journal Of Material Processing and Technology, Vol 265, pp1017-1022.,2008

Bull, S. J., Rickerby, D.S.,”The Sliding Wear of Titanium Nitride Coating”, Surface Coating Technologi. Vol 41, pp269-283.,1990.

Callister, W.D.,” Fundamentals of Materials Science and Engineering”, Butterworth Heinemamn, Eleventh Edition, Oxford.,2001.

Hai, Z., Fei, C., Jianping, W., ”Study of Properties of TiN Coating on Previously Ion Implanted pure Magnesium Surface by MEVVA ion Implantation”, Plasma Science and tehnology, Vol 9.No.6, 2007.

Krauss, G.,. “ Steel Heat Treatment and Perocesing Principle”, ASM.Inc Material Park. Ohio,1995.

Lausa, A., Esteve. J., Mejia. J,P., Devia. A., “ Influence of Deposition Pressure on the Structural — Mechanical and Decorative Properties of TiN thin Film Deposited by Chatodic arc Evaporation”, Science Direct, Vacuum 81, pp 1507-1510.,2007.

Malau, V., “Perlakuan Permukaan”, Diktat Kuliah. Jurusan Teknik Mesin Universitas Gadjah Mada.,2003.

Roberge, P.R., ”Corrosion Engineering Principle and Practice”, Third Edition,McGraw-Hill Book Company, New York , 2008.

Shen, L,R., Wang.K., Tie, J., Tong, H.H, Chen, O.C., Tang, D.L., Fu, R.K.Y., Chu, P.K., "Modification of High-Cromium Cast Iron Alloy by N and Ti ion Implantation”, Surface and Coating Technology, 196 hal 349- 352, 2004.

Sujitno, T., “Apliksi Plasma dan Teknologi Sputtering untuk Surface Treatment”, PTAPB BATAN, Yogyakarta, 2003.

Smalman, R.E., Bishop, R.J., ”Modern Physical Metalurgi and Material Engineering 6" edition”, Red Educational and Propesional Publishing, Oxford , 1999.

Smith,W.F .,”Principless Of Material Science and Engineering”, Mc Graw Hill International Edition, Singapore, 1990.

.Smith, W.F.,”Structure and Properties of Engineering Alloys”, 2” ed., Mc Graw Hill Inc.New York.,1993.

Ueda, M., Gomes, F.G., Kostov, K.G., Reutther, H., Lepienski, C,M., Soares, Jr., Tokai, O., Silva, M.M., “ Result From Experiment on Hybrid Plasma Immersion Ion Implantation “. Brazilian Journal of Physic, 2004.

Yao, S.H., Kao, W. H., Su, Y,L., Liu, T.H., “Effect of Periods on Wear Performance of TIN/AIN Superlattice film”, Material Science and Engineering A 392,pp 380-385 , 2004.

Zhao, O.G., Bai, X. D., Xue, X. Y., Chen, X. W., Xu, J., Wang, D.R., “Influence of Aluminum ion Implantation on Oxidation Behavior in air it 500°C of TiN Coating”, Surface and Coating Technology 191,pp212- 215, 2004.

DOI: http://dx.doi.org/10.30811/jp.v8i1.1337