Kajian Investigasi Penerapan Building Information Modelling (BIM) pada Sektor Konstruksi di Kota Palangka Raya

Subrata Aditama Kittie Aidon Uda, Saritha Kittie Uda, Devia Devia

Abstract


The construction industry is witnessing a rapid and sophisticated advancement in technology and information, which has led to intense competition among construction service providers. One of the technologies that has completely changed the construction sector is Building Information Modelling (BIM). Acquiring proficiency in this approach will boost productivity and enhance time, expense, quality, and environmental friendliness. Nonetheless, there is still a lack of discernible progress in the application of BIM in the construction industry, particularly for contractors and consultants residing outside of Java Island. This research was conducted in the city of Palangka Raya where most of the construction service actors still use conventional methods, this will provide an opportunity to find out the responses and obstacles experienced by local construction service actors regarding the use of BIM in construction work. The results showed that the advantage factor was occupied by the cost and time management sub-factor with a mean value of 4.158 and a standard deviation of 0.449, while the obstacle factor was the BIM support facility with a mean value of 4.422 and a standard deviation of 0.666 as the dominant factor inhibiting the implementation of BIM in construction projects in Palangka Raya City. The government's participation in enhancing contractors' and consultants' capacity to understand BIM through training and competency programs is necessary to foresee this hindrance factor.

Keywords


Building Information Modelling (BIM), Contractor & Consultant, Construction Sector, Palangka Raya City

References


Adhi, R. P., Hidayat, A., & Nugroho, H. (2016). Perbandingan Efisiensi Waktu, Biaya, Dan Sumber Daya Manusia Antara Metode Building Information Modelling (BIM) Dan Konvensional (Studi Kasus: Perencanaan Gedung 20 Lantai). Jurnal Karya Teknik Sipil, 5(2), 220-229.

Azhar, S. (2011). Building information modeling (BIM): Trends, benefits, risks, and challenges for the AEC industry. Leadership and management in engineering, 11(3), 241-252.

Chandra, H. P., Nugraha, P., & Putra, E. S. (2017). Building Information Modeling in the architecture-engineering construction project in Surabaya. Procedia Engineering, 171, 348-353.

Czmoch, I., & Pękala, A. (2014). Traditional design versus BIM based design. Procedia Engineering, 91, 210-215.

Fitriani, H., Budiarto, A., Ajayi, S., & Idris, Y. (2019) Implementing BIM in architecture, engineering and construction companies: Perceived benefits and barriers among local contractors in Palembang, Indonesia.

Hatmoko, J. U. D., Fundra, Y., & Wibowo, M. A. (2019). Investigating Building Information Modelling (BIM) Adoption in Indonesia Construction Industry. In MATEC Web of Conferences (Vol. 258, p. 02006). EDP Sciences.

Hutama, H. R., & Sekarsari, J. (2018). Analisa Faktor Penghambat Penerapan Building Information Modeling Dalam Proyek Konstruksi. Jurnal Infrastruktur, 4(1), 25-3.

Ibrahim, H. S., Hashim, N., & Jamal, K. A. A. (2019). “The Potential Benefits of Building Information Modelling (BIM) in Construction Industry.†IOP Conf. Series: Earth and Environmental Science, 385, 012047.

Ismail, N. A. A., Chiozzi, M., & Drogemuller, R. (2017). “An Overview of BIM Uptake in Asian Developing Countries.†AIP Conference Proceedings.

Kementerian Pekerjaan Umum Dan Perumahan Rakyat Badan Pengembangan Sumber Daya Manusia Pusat Pendidikan Dan Pelatihan Sumber Daya Air Dan Konstruksi. (2018). Modul 3 Prinsip Dasar Sistem Teknologi BIM dan Implementasinya di Indonesia, Bandung. 55 Hal.

Kreider, R. G., & Messner, J. I. (2013). The uses of BIM. Classifying and Selecting BIM, Pennsylvania State University (9th version).

MesároÅ¡ P., & MandiÄák T. (2017). “Exploitation and Benefits of BIM in Construction Project Management.†IOP Conf. Series: Materials Science and Engineering, 245. 062056.

Mieslenna, C. F., & Wibowo, A. (2019). Mengeksplorasi Penerapan Building Information Modeling (BIM) Pada Industri Konstruksi Indonesia Dari Perspektif Pengguna. Jurnal Sosial Ekonomi Pekerjaan Umum, 11(1), 44-58.

NBIMS (2012). “National BIM Standard – United States Version 2†National Institute of Building Sciences (NIBS) buildingSMART Alliance

Sacks, R., Eastman, C., Lee, G., & Teicholz, P. (2018). BIM Handbook: A Guideto Building Information Modeling for Owners, Designers, Engineers, Contractors, and Facility Managers (Third ed.). John Wiley & Sons, Inc.




DOI: http://dx.doi.org/10.30811/portal.v17i1.5848

Refbacks

  • There are currently no refbacks.


Copyright (c) 2025 SUBRATA ADITAMA KITTIE AIDON UDA