3 Floor Luxury House Structure Design Planning Using ETABS Software

Fera Aysha, Meilandy Purwandito, Haikal Fajri

Abstract


Structural planning is a mixture of basics with science in structural analysis, statics, mechanics of materials and dynamics to obtain structures that are safe and economical in their service life. The purpose of this study was to plan the dimensions of the building's portal structure that can withstand loads safely. This research was conducted in Karang Asem 1, Kuningan, Setia Budi, South Jakarta. The final result of structural planning can be concluded that there are several beams used including, 450/600 beams, 450/700 beams, 500/700 beams, 550/700 beams, 600/750 beams, 450/650 beams, 400 beams /550, and ring beams. All of the above beams use D16 longitudinal reinforcement with d10 stirrup reinforcement. while the columns used are 400/350 columns, 400/400 columns, 450/450 columns and 450/500 columns using D16 longitudinal reinforcement with d10 stirrup reinforcement. And the 650/650 column uses D22 for longitudinal reinforcement and d10 for stirrup reinforcement.

Keywords: Reinforced concrete structure, ETABS software, Planning, design, house, 3rd floor


Full Text:

PDF

References


Maysarah, Yulina Ismida, Meilandy Purwandito. Calculation Analysis of the Structure of the Civil Engineering Laboratory Type II, Faculty of Engineering, Samudra University. no. 1, 2013, page. 20–25.

SNI_1727:2020. “Minimum design load and related criteria for buildings and other structures as a revision of the Indonesian National Standard 1727: 2013 Minimum load for building design and.” SNI 1727:2020, no. 8.

SNI_2847:2019. “Structural Concrete Requirements for Buildings and Explanations (SNI 2847:2019).” National Standardization Agency, no. 8, 2019, page. 695.

SNI_1726-2019.” Procedures for Planning Earthquake Resistance for Building and Non-Building Structures, 8, 2019, 254

Amaral, C. (2016). Alternative Design of Shear Wall with Cantilever System at the Faculty of Social Sciences, State University of Malang.

Arisandi, D., Apriyanti S.T. M.T, Y., & Fahriani S.T. M.T, F. (2017). Correlation Analysis of N-Spt Value With Value. 5, 1–10.

Dwinata, R. H. (2015). Skyland city education park apartement parking building basement planning - Bandung Apartement Skyland City Education.

Kalista, D. D. R., & Sulistiyani, D. R. (2016). Basement on street Diponegoro Semarang.

Kusmawan, I. G. A., S, I. K. N., & Jawat, I. W. (n.d.). Planning Methods for Implementation of Basement Structures on. 1–5.

Liando, F. J. (2020). Design of Reinforced Concrete Structures for 5-Story Lecture Building. Design of Reinforced Concrete Structures for 5-Story Lecture Building, 8(4), 471–482.

Mayasari, W. A., Indra. MSc., I. S., & Priskasari. MT, I. E. (2017). Design of shear walls with openings in the Ponorogo district education office building. 2, 33–41.

Nurjaman, A. P. (2019). Planning of Reinforced Concrete Structures for 3-Story Eco Buildings in Waisai City. Design of Reinforced Concrete Structures 3 Floor Eco Buildings In Waisai City, 2(2), 15.

Robarch, C., Anggraini, R., & Zacoeb, A. (2002). keywords : 1–11.

Shaputera, A., & Firmanto ST. MT, A. (2019). Construction Journal. Planning of the 3 Floor Building Structure of Unswagati Cirebon 1 Campus by Using a Concrete Structure, VIII, 558–567.

Ui, F. T. (2012). Study of the behavior of reinforced concrete shear walls and steel plate shear walls with non-linear static analysis.




DOI: http://dx.doi.org/10.30811/portal.v15i1.3049

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 fera aysha, meilandy purwandito, haikal fajri