Vol 5, No 2 (2023)

December

DOI: http://dx.doi.org/10.30811/jowt.v5i2

Table of Contents

The influence of prandtl number on flow characteristics of the fume from GMAW welding
DOI: 10.30811/jowt.v5i2.4024 | Abstract views : 232 times | Check in Scholar
Luthfi Luthfi
PDF
25-31
The effect of rootgap distance and polarity on deffects in SMAW welding procedure
DOI: 10.30811/jowt.v5i2.4038 | Abstract views : 210 times | Check in Scholar
Ade Nurfauziah, Nurlela Nurlela, Topik Hidayat, Wahyu Efendi Manullang, Ananda Yhuto Wibisono putra
PDF
32-37
Analysis of variations in the number of layers of hardfacing overlay ABREX 500 material on hardness,impact strength and microstructure with the SMAW process
DOI: 10.30811/jowt.v5i2.4286 | Abstract views : 359 times | Check in Scholar
Moh. Syaiful Amri, Dika Anggara, Imam Khoirul rohmat, Hendri Budi Kurniyanto, Dika Septya Pradana
PDF
38-45
Analysis of quenching temperature variations in the heat straightening processFor multiple ripair FCAW welding HSLA SM490YA material
DOI: 10.30811/jowt.v5i2.4633 | Abstract views : 259 times | Check in Scholar
Mohammad Thoriq Wahyudi, Moh Syaiful Amri Amri, Muhamad Ari, Mukhlis Adam, Fais Hamzah, Azriel Harsha Novaldi
PDF
46-51
Analysis of Bending Methods on BjTP 280 Roundbars on Hardness and Microstructure
DOI: 10.30811/jowt.v5i2.4197 | Abstract views : 259 times | Check in Scholar
Adzin Hanif Muttaqin, Mohammad Miftachul Munir, Imam Khoirul Rohmat
PDF
52-56