Vol 4, No 1 (2022)

June

DOI: http://dx.doi.org/10.30811/jowt.v4i1

Table of Contents

Comparative analysis of hardness and microstructure of dissimilar welded materials at various welding positions in the fabrication industry
DOI: 10.30811/jowt.v4i1.2967 | Abstract views : 1771 times | Check in Scholar
Mochammad Karim Al Amin, Ilham Nurcholis, Wiwik Dwi Pratiwi, Dika Anggara, Eriek Wahyu R W
PDF
1-8
Hot tapping process analysis on gas distribution pipes online service using Shielded Metal Arc Welding
DOI: 10.30811/jowt.v4i1.2953 | Abstract views : 1135 times | Check in Scholar
Budi Prasojo, Yunan Sadli Nasution, Endah Wismawati, Subagio So’im, M. Ari
PDF
9-15
Analysis of current variation and solvent flux type on microstructure and hardness of type 304 austenitic stainless steel welded by Tungsten Inert Gas welding
DOI: 10.30811/jowt.v4i1.2948 | Abstract views : 1022 times | Check in Scholar
Moh. Syaiful Amri, Mukhlis Mukhlis, Arya Triananda Kusuma
PDF
16-21
Analysis of the effect of current on tensile strength of aisi 1050 material in the SMAW welding process
DOI: 10.30811/jowt.v4i1.2996 | Abstract views : 1121 times | Check in Scholar
Aris Mauliza, Usman Usman, Saifuddin Saifuddin
PDF
22-26
The effect of weld groove variations on the toughness of welding joints of AISI 1050 material
DOI: 10.30811/jowt.v4i1.2998 | Abstract views : 2621 times | Check in Scholar
Zulkiffli Purba, Samsul Bahri, Jenne Syarif
PDF
27-33