Pengaruh Panas Baja AISI 4340 Setelah Mengalami Proses Pengelasan Pada Daerah Haz, Pada Daerah Las dan Pada Bagian Dasar

Muhamad Nurhasan, Iman Dirja, Reza Setiawan

Abstract


AISI 4340 carbon steel is a type of steel belonging to a medium carbon alloy steel which is widely used as the main material in engines such as shafts, gears and piston connecting rods in motorized vehicles. Alloy carbon steel is one of the materials that is widely produced and used to make machine tools or parts, because alloy carbon steel has properties that can be modified, slightly ductile and tough (toughness), but some of these superior properties can experience changes when there is a variety of cooling processes, for that we need a study of the proper cooling process after the stainless steel has received heat input (due to welding), thus the properties of the crowns that are owned will not be much different when before the welding process is carried out compared to variations in cooling due to the welding process. This study aims to determine the effect of temperature in the SMAW welding process method on the microstructure. The method of research carried out using laboratory testing methods in order to determine the micro structure. The results showed that welding had an influence on the microstructure of the HAZ area and the weld area, the microstructure of the parent metal, and the HAZ area consisting of pearlite and ferrite. The result of the microstructure containing more pearlite than ferrite results in better connection quality.


Keywords


Welding, Microstructure, SMAW, AISI 4340

Full Text:

PDF

References


Kosasih, “Teknologi dan Proses Pengelasan.” Bandung: Balai Bahan Bahan dan Barang Teknik, 2015

A. Setiawan and Y. A. Y. Wardana, “Analisa Ketangguhan dan Struktur Mikro pada Daerah Las dan HAZ Hasil Pengelasan Sumerged Arc Welding pada Baja SM 490,” J. Tek. mesin, vol. 8, no. 2, pp. 57–63, 2006.

T. B. Santoso, S. Solichin, and P. Trihutomo, “Pengaruh kuat arus listrik pengelasan terhadap kekuatan tarik dan struktur mikro las SMAW dengan elektroda E7016,” J. Tek. Mesin, vol. 23, no. 1, 2016.

B. H. KEMBAREN and A. S. Mohruni, “PENGARUH VARIASI KECEPATAN LAS DAN KUAT ARUS TERHADAP KEKERASAN, TEGANGAN TARIK, STRUKTUR MIKRO BAJA KARBON RENDAH DENGAN ELEKTRODA E 6013.” Sriwijaya University, 2012.

R. O. Mahendra, “Analisis Pengaruh Bahan PIN terhadap Sifat Mekanik dan Struktur Mikro Sambungan Plat Aluminium pada Proses Friction Stir Welding.” Universitas Muhammadiyah Surakarta, 2019.

K. Easterling, Introduction to the physical metallurgy of welding. Elsevier, 2013.

B. Bandanadjaja, C. Ruskandi, "Perlakuan Panas Material AISI 4340 Untuk Menghasilkan Dual Phase Steel Ferrit-Bainit." Bandung: POLMAN, 2016

J. E. Bringas, “Handbooks of comparative world steel standards.” ASTM International, 2004.

D. G. Rethwisch, “William D. Callister, Jr.,” Mater. Sci. Eng., vol. 3.

A. C. E. on Terminology, ASTM Dictionary of Engineering Science & Technology. Astm International, 2005.

M. P. Groover, “Fundamentals-of-Modern-Manufacturing-4Th-Edition-By-Mikell-P-Groover.” John Wiley & Sons, 2010.

S. Kalpakjian and S. R. Schmid, Manufacturing Engineering. Pearson Prentice Hall: Upper Saddle River, NJ, USA, 2009.

J. E. Bringas, “Handbooks of comparative world steel standards.” ASTM International, 2004.

Amanto H., dan Daryanto, “Ilmu bahan,” cetakan pertama, Bumi aksara, 1999

R. M. Susita and S. Sulamdari, “Microstructure Characterization Of Stainless-Steel Implanted By Nitrogen Ion; KARAKTERISASI STRUKTUR MIKRO STAINLESS-STEEL HASIL IMPLANTASI ION NITROGEN,” 1996.




DOI: http://dx.doi.org/10.30811/jpl.v19i1.2041

Refbacks

  • There are currently no refbacks.


Add comment



Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

      

 

   

   

   

Lisensi Creative Commons

Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional.

 

Mailing Address:

Politeknik Negeri Lhokseumawe

Jl. Banda Aceh-Medan
Km. 280,3, Buketrata, Mesjid Punteut, Blang Mangat,
Kota Lhokseumawe, 24301

Propinsi Aceh,
Indonesia