Desain Dan Simulasi Lokus Penanam Padi Pada Mekanisme Empat Batang Penghubung Dengan Menggunakan Software Solidworks

Marzuki Marzuki, Sumardi Sumardi

Abstrak


Abstrak - Four link bar mechanism is one of mechanism used in wet Rice transplanting machine. This mechanism consist of a Frame, Cranck, Connector, and Rocker, which is a kinematics chain that is bounded by a systems condition of link bar that are joined together or intersect conditions that allows moving relative or moving any other  link bar position as desired. The planting locus from the movement of this mechanism shows the steps of taking the seedlings from the hoper, placing the seedlings in the right position, correct planting holes and accuracy of feeding the planting holes. This study aims to design and simulate the parameter of four links bar mechanism in order to obtain the optimum parameters and provide an accurate planting locus. The method used in this research is selection of the optimum design parameter of four link bars, namely dimensions and simulation mechanism and movement analysis. Using Solidworks software can simulate an optimal locus of planting by analyzing the velocity, acceleration and movement of four link bar mechanism.

 

Key words: Four link bar mechanism, Locus of planting, Rice seedlings planted, simulation and Motions Analysis.


Teks Lengkap:

PDF

Referensi


Marzuki, dkk, Permodelan Meknisme Empat Batang Penghubung Pada Mesin Penanam Padi Dengan Menggunakan Software Solidworks, Jurnal Teknologi Volume 14 No.2 ISSN 1412-1476.

Thomas, E.V, Development of Mechanism for Transplanting Rice Seedlings, Mechanism and Machine Theory, Elsevier Science Ltd, 2002.

Lu Xiao-rong, dkk, Experimental Study on Working Performance of Rice Rope Direct Seeding Machine, Science Direct, Elsevier Ltd, 2010.

Marzuki dan Nurdin, 2011, Rancang bangun alat bantu penanam padi, Laporan Penelitian, Politeknik Negeri hokseumawe.

Watson, J 2007, Unveiled Machine That is Sow Precise, Farm Journal, The Pers and Journal 22 September 2007, UK.

Singh. G, 1985, Field Performance Evaluation of a Manual Rice Transplanter, The British Society for Research in Agricultural Engineering.

Lu Xiao-rong, dkk, 2010, Experimental Study on Working Performance of Rice Rope Direct Seeding Machine, Science Direct, Elsevier Ltd.

The IRRI Reporter, 1984, IRRI Machines Changes Ancient Burmese Farming Methods, Published by IRRI.

Anonymous Rice Transplanters, RNAM Digest I, 1979, Regional Network for Agricultural Machinery, C/o United Nations Development Programme, Pasay city, Philippines.

Guo, L.S dan Zhang, W.J, 2001, Kinematic Analysis of a Rice Transplanting Mechanism with eccentric Planetary gear Trains, pergamon, Elsevier Science Ltd.

Waldron, K.J and Kinzel, G.L 1999, Kinematics, Dynamics and Design of Machinery, John Willey & Sons Inc, New York.

Bahri, S 2007, Desain dan Simulasi Mekanisme Penggerak Pengeruk Ditcher untuk Pembuatan Saluran Drainase Pada Lahan Beralur, Jurnal Teknologi, Vol. 8 No.1 Oktober 2007 ISSN 1412-1476.

Saputro, O.W.W 2004, Rancang Bangun Furrower Pembuat Guludan dan Modifikasi Furrower Pembuat Bedengan Untuk Budidaya Sayuran, [Skripsi], Fateta IPB, Bogor.

Reis, A.V and Forcellini, F.A, 2002, Functional analysis in the evaluation of four concepts of planter, Scielo nternational jurnal, ISSN 0103-8478.


Refbacks

  • Saat ini tidak ada refbacks.


Hak Cipta (c) 2019 Prosiding Seminar Nasional Politeknik Negeri Lhkseumawe



Creative Commons License

Prosiding Seminar Nasional Politeknik Negeri Lhokseumawe is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License

© 2017 All rights reserved |Seminar nasional Politeknik Negeri Lhokseumawe p-ISSN:2598-3954.

.