PENGARUH VARIASI KOMPOSISI SERAT SABUT KELAPA TERHADAP KEKUATAN MEKANIK BAHAN GENTENG KOMPOSIT POLIMER

Milawarni Milawarni

Abstrak


The research on the manufacture and characterization of polymer composite tile utilized the waste of polypropylene (PP) and coconut fiber (SSK) has been done. Asphalt material used is 10%, 10% PP and compositional variations of sand and SSK are (80:0), (79:1), (78:2), (77:3), (76:4) and (75:5). To find out the characterization of polymer composite tile, the mechanical are done. In the mechanical testing that includes testing the maximum tensite, flexural strength testing and impact is on the composition of the sample 4 (77:3) by 53.26 kgf/cm2 133.39 kgf/cm2 or 13.08 MPa and 2.00 J/cm2. The addition of coconut fiber is as much as 3% can increase the mechanical stength polymer composite tile.


Kata kunci


Polymer composite tile, Coconut fiber, Polypropylene, Mechanical properties.

Teks Lengkap:

PDF

Referensi


Allorerung, "Kemungkinan Pengembangan Pengolahan Buah kelapa Secara Terpadu Skala pedesaan". Proseding Konferensi Nasional Kelapa IV. Bandar Lampung,1998.

Attaf, B. Advances in Composite Material-Ecodesign and Analysis. In Tech,2011.

Bhagwan D.Agarwa, L, Analysis and Performance of Fiber Composite,. Hermes Science Publication, 2006.

B Macklin. (2009, Januari) Pengolahan Limbah Plastik dngan Metode Daur Ulang (Recycle). [Online]. http://onlinebuku.com

Chung, D. "Composite Materials:science and aplications:Functional material for modem technology". British: British Library cataloge,2003.

Evi Crhistiani, "Karakterisasi ljuk pada Papan Komposit ljuk Serat Pendek sebagai Perisai Radiasi Neutron," Magister Ilmu Fisika, USU, Medan, Tesis 2008.

Decolon, C. Analysis of Composite Structure. Paris: Hermes Science Publication, 2000.

DEKINDO, D. K."Kelapa Indonesia". [Online]. http://www.dekindo.com

Ditjenbun Kelapalndonesia".[Online] http://www.ditienbun.deptan.go.id

Gibson, F. Principle of Composite Material Mechanics International Edition. New York: Mc. Graw

Hill, 2005.

Hartono, A. Daur Ulang Limbah Plastik dalam Pancaroba: Diplomasi Ekonomi dan Pendidikan, 2010.

Massijaya, M.Y. (2005). Pengembangan papan komposit berkualitas tinggi dari sabut kelapa dan plastik polipropilen daur ulang. Jumal Teknologi Hasil Hutan, 91-100.

Nurmaulita. (2010). Pengaruh Orientasi Serat Sabut Kelapa dengan Resin Poliester Karakteristik Papan Lembaran. Tesis, Universitas Sumatera Utara, Medan.

Lawrence H. Van Viack, Elemen-elemen Ilmu dan Rekayasa Material. Jakarta: Erlangga, 2004.




DOI: http://dx.doi.org/10.30811/portal.v5i1.954

Refbacks

  • Saat ini tidak ada refbacks.


Hak Cipta (c) 2019 Milawarni Milawarni

Creative Commons License

Portal: Jurnal Teknik Sipil is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License 

©2018 All rights reserved | ISSN 2085-7454 (print) | 2622-576X (online)