Prototipe Turbin Angin Savonius Variasi Extra Layers Dengan Pengujian Real Wind Condition

Yudi Kurniawan, Ida Bagus Dharmawan, Zulkifli Zulkifli

Abstract


Wind energy is renewable energy that is clean, environmentally friendly and easy to obtain. Balikpapan City is very suitable for applying the Savonius wind turbine because it has a relatively low average wind speed. Savonius wind turbine is a turbine consisting of two concave and convex blades that work based on drag forces. Savonius wind turbine can utilize wind energy at low speed < 2 m/s to be converted into electrical energy which can reduce the electrical load in urban areas. This research makes a prototype of the Savonius wind turbine with the addition of variations extra layer on the concave turbine blades. The test method uses a generator that is attached to the turbine shaft and the test is carried out in a multi-storey building area. The results obtained are the Savonius wind turbine prototype capable of producing actual power 0.76 Watt and power coefficient is 0.082. The addition of an extra layer at both tips of the turbine concave blades is proven to be able to improve the performance of the Savonius wind turbine.


Keywords


prototype, wind turbine, savonius, extra layers

Full Text:

PDF

References


Y. Kurniawan, D.M. Kurniawati dan D.D.D.P. Tjahjana, “Studi Eksperimental Pengaruh Aspek Rasio Terhadap Unjuk Kerja Turbin Angin Crossflow”, SNITT Politeknik Negeri Balikpapan, Isbn: 978-602-51450-1-8, P63, 2018.

Y. Kurniawan dan D.D.D.P. Tjahjana, “Studi Eksperimental Pengaruh Jumlah Sudu Terhadap Unjuk Kerja Turbin Angin Crossflow, SNITT Politeknik Negeri Balikpapan, Isbn: 978-602-51450-1-8, P62.

S. Pakpahan, Peta Potensi SDA Indonesia : Orasi Ilmiah Pengukuhan Ahli Peneliti Utama Bidang Instrumentasi dan Pengolahan Data Jakarta, 10 Nopember 2003 Lembaga Penerbangan Dan Antariksa Nasional.

Badan Perncanaan Pembangunan Daerah, Kajian Energi Terbarukan Di Kota Balikpapan Tahun 2015.

S. Mathew, “Wind Energy Fundamentals, Resource Analysis And Economics”. Springer, 2006.

M.H. Mohamed, G. Janiga, E. Pap dan D. Thévenin, “Optimization Of Savonius Turbines Using An Obstacle Shielding The Returning Blade”, Renewable Energy Journal, Vol. 35, No. 11, Pp. 2618–2626, 2010.

Y. Kurniawan, D.D.D.P. Tjahjana dan B. Santoso, “Experimental Study Of Savonius Wind Turbine Performance With Blade Layer Addition”. Journal Of Advanced In Fluid Mechanich And Thermal Science, Vol.69, Vol.1, No. 1, Pp. 23–33, 2020.

P. Jain, Wind Energy Engineering. 2011.

S. Sharma dan R.K. Sharma, “Performance Improvement Of Savonius Rotor Using Multiple Quarter Blades – A Cfd Investigation”. Energy Conversion Management, Vol. 127, Pp. 43–54, 2016.

S. Sharma dan R.K. Sharma, “Cfd Investigation To Quantify The Effect Of Layered Multiple Miniature Blades On The Performance Of Savonius Rotor”. Energy Conversion Management, Vol. 144, Pp. 275–285, 2017.

Y. Kurniawan, D.D.D.P. Tjahjana dan B. Santoso, “Experimental Studies Of Performance Savonius Wind Turbine With Variation Layered Multiple Blade”, IOP Cenference Series: Earth And Environmental Science 541 (2020) 012006.

A.A. Al-Maaitah, “The Design Of The Banki Wind Turbine And Its Testing In Real Wind Conditions”. Renewable Energy Journal, Vol. 3, No. 6, 1993.

U.K. Saha, S. Thotla dan D. Maity, “Optimum Design Configuration Of Savonius Rotor Through Wind Tunnel Experiments”. Journal Wind Engineering And Industrial Aerodinamics, Vol. 96, No. 8–9, Pp. 1359–1375, 2008.

S. Roy dan U.K. Saha, “Wind Tunnel Experiments of A Newly Developed Two-Bladed Savonius-Style Wind Turbine”. Applied Energy, Vol. 137, Pp. 117–125, 2015.

M.A. Kamoji, S.B. Kedare dan S.V. Prabhu, “Performance Tests On Helical Savonius Rotors”. Renewable Energy Journal, Vol. 34, No. 3, Pp. 521–529, 2009




DOI: http://dx.doi.org/10.30811/jpl.v19i1.2053

Refbacks

  • There are currently no refbacks.


Add comment



Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

      

 

 

    

   

Lisensi Creative Commons

Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional.

 

Mailing Address:

Politeknik Negeri Lhokseumawe

Jl. Banda Aceh-Medan
Km. 280,3, Buketrata, Mesjid Punteut, Blang Mangat,
Kota Lhokseumawe, 24301

Propinsi Aceh,
Indonesia