Pengaruh matrik resin-epoxy terhadap kekuatan impak dan sifat fisis komposit serat nanas

Ade Irvan Tauvana, Syafrizal Syafrizal, Mokhamad Is Subekti

Abstract


Pineapple leaf fiber is currently widely used in furniture and handicraft industries because it is easy to obtain, inexpensive, does not endanger health, can reduce environmental pollution so that later on as a composite reinforcing fiber can overcome environmental problems The choice of epoxy resin as a base material is caused the strength and stiffness of Epoxy resins is greater compared to other types of polymers. This study was intended to see the impact strength of pineapple fibers resin-epoxy and the fracture material of the specimen with macro photographs. The test specimens used pineapple fiber with volume fraction, 10%, 30%, 50% and epoxy resin matrix and hardener as hardener. The specimen is made by casting and mica as a mold. Mechanical testing using impact test, Physical test using photo macro structure. The result of the impact study obtained the impact price on the fraction of 50% volume that is equal to 0.76 J / mm2, this occurs because the fraction of fiber volume of 50% in addition to the distribution of the uniform force by the matrix is also supported by the ideal fiber, from the results of the above research In Can the optimum fiber volume fraction is at 50% volume fraction.


Keywords


fiber, pineapple, impac, resin, efoxy

References


Callister, W. D., Material Science and Enginering, An Introduction 7ed, Department of Metallurgical Enginering The University of Utah : John Willey and Sons, Inc, 2007.

Hartono, Rifat. M., Handoko., Pengenalan Teknik Komposit. Yogjakarta: Deep Publisher, 2016.

Diharjo, K., Triyono T., Material Teknik, Buku Pegangan Kuliah. 2000

J. Sarjito, “Analisa Teknis Penggunaan Serat Kulit Rotan Sebagai Penguat Pada Komposit Polimer Dengan Matriks Polyester Yukalac 157 Ditinjau Dari Kekuatan Tarik dan Kekuatan Tekuk,” J. Teknik Perkapalan, vol. 30, no. 3, pp. 191-197, 2009.

S. A.Daulay, F. W, “Pengaruh Ukuran Partikel dan Komposisi Terhadap Sifat Kekuatan Bentur Komposit Epoksi Berpengisi Serat Daun Nanas,” J. Teknik Kimia USU, vol. 3, no. 3, pp. 13-17, 2014

Darmansyah, “Evaluasi Sifat Fisik dan Sifat Mekanik Material Komposit Serat/Resin Berbahan Dasar Serat Nata De Coco Dengan Penambahan Nanofiller,” Tesis, Program Pasca Sarjana Teknik Kimia UI, Depok, 2010.

Hadi, J. Sarjito, P. Manik, “Analisa Teknis Penggunaan Serat Daun Nanas Sebagai Alternatif Bahan Komposit Pembuatan Kulit Kapal Ditinjau Dari Kekuatan Tarik, Bending Dan Impact,” J. Teknik Perkapalan, vol.4, no. 1, Jan. 2016.

S. H.Firman, Muris, S. Junaedi, “Studi Sifat Mekanik Dan Morfologi Komposit Serat Daun Nanas-Epoxy Ditinjau Dari Fraksi Massa Dengan Orientasi Serat Acak,” J. Sains dan Pendidikan Fisika, vol. 11, no. 2, pp.185–191, Agt, 2015.

H. Fahmi, H. Hermansyah, "Pengaruh Orientasi Serat Pada Komposit Resin Polyester/ Serat Daun Nanas Terhadap Kekuatan Tarik,” J. Teknik Mesin, vol. 1, pp. 46-52, Okt, 2011.

ASTM D 256-00, "Standard Test Methods For Determining the izod pendulum impact resistance of Plastics” Philadelphia, PA: American Society for Testing and Materials

ASTM D 790-02, “Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials” Philadelphia, PA : American Society for Testing and Materials.

S. Husseinsyah , M. Mostapha, “The Effect of Filler Content on Properties of Coconut Shell Filled Polyester Composites,” Malaysian Polymer J., vol. 6, no. 1, pp. 87-97, 2011.




DOI: http://dx.doi.org/10.30811/jpl.v18i2.1841

Refbacks

  • There are currently no refbacks.

Comments on this article

View all comments
 |  Add comment



Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

      

 

 

    

   

Lisensi Creative Commons

Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional.

 

Mailing Address:

Politeknik Negeri Lhokseumawe

Jl. Banda Aceh-Medan
Km. 280,3, Buketrata, Mesjid Punteut, Blang Mangat,
Kota Lhokseumawe, 24301

Propinsi Aceh,
Indonesia